If you looking for sheathing tape black then you are right place. We are searching for the best sheathing tape black on the market and analyze these products to provide you the best choice.
Reviews
1. Intertape Polymer Group 5560CNDR Sheathing Tape, 2.36 -Inch x 72.1-Yard, Red/Black Print
Feature
Provides a permanent seal for joints in housewrap and foam insulationWeather and UV resistant
Adheres to poly plastic
Available in white and red, along with CCMC certified red
Made in USA
Description
Construction sheathing tape, made with an aggressive acrylic adhesive and strong polypropolene backing, is designed and engineered primarily for permanent sealing of joints in foam insulation, osb and other sheathing materials, to secure lap edges in house wraps and other vapor barriers, repair rips and tears in a roll/batt insultaion, construction films and menbranes. Prevents air infiltration, provides vapoor barrier protection, enhances the building envelope appearance and provides superior bonding at sub-zero (as low as -40c) and elevated temperatures when applied at temperatures above 40f. Designed specifically for the permanent seaming and sealing of joints in foam insulation and housewrap.2. Chrome Glow 180 White LEDs Truck Bed Cargo Light Kit with Waterproof Switch - Universal
Feature
Includes three (3) 39" White LED strips containing 60 LEDs eachThe strips are completely waterproof due to the full rubber housing encasing the LEDs
Strips come with high-quality 3M double-sided tape attached to back surface for a quick and easy install
20" wire leads wrapped in black sheathing coming out of both ends of the strips; cut a strip in half and then you have two without any soldering required!
LED Wiring Kit included; Everything you need to wire and install the kit including an on/off switch that you can place near the tailgate for easy access to turn the lights on and off!
Description
Super Thin & Flexible LED Accent Strips - Truck Bed Light Kit***This kit comes with three (3) 39" WHITE strips (60 LEDs each) and LED Wiring Kit detailed below***
This kit is designed specifically for use as pickup truck bed lighting, but the strips are ideal for accenting your motorcycle motor, trunk, and saddlebags plus their rubber coating makes them a great option for motorcycle or auto ground effects. Try them on your boat, as under-cabinet lighting, or anywhere you can imagine!
These LED strips are flexible, waterproof, extremely versatile, and will work on any 10-14V DC system.
Features:
- 4 colors to choose from - Red, White, Blue, and Green (if you would like one of these kits in Red or Green send a message and we will create a listing!)
- Completely waterproof due to the full rubber housing encasing the LEDs
- Super thin at only .100" thick and .312" wide
- Flexible enough to wrap around your pinky finger
- High quality 3M Double-sided tape attached to back surface
- Works on all 10-14V DC systems
- LEDs are spaced at 5/8" apart.
- 20" wire leads wrapped in black sheathing coming out of both ends of the strips; cut a strip in half and then you have two without any soldering required!
LED Wiring Kit
Contains:
- Waterproof Push Button switch with 12" leads
- 12" Grounding Wire
- Two Wago Lever Lock (2) Terminal Blocks
- 20 feet of 2/26 hook-up wire
- 4 Posi-Lock wire connectors
- Twelve 4" Black Cable Ties
- 3M Adhesion Promoter Pad
- In-line Fuse Holder
- 4 Amp Mini Fuse
*Basic Installation Instructions Included
3. Shurtape HW-300 Housewrap Sheathing Tape: 2-1/2 in. x 60 yds. (Red with Black Printing)
Feature
Please read description before ordering. Please contact the seller if you have any questions.Description
Shurtape HW-300 Housewrap Sheathing Tape is a water-based acrylic housewrap tape designed as a closure system and/or operates as a vapor seal on interior and exterior vapor barrier materials. The tape can be used for repair of any housewrap materials in addition to its usefulness for new construction. Shurtape HW 300 may be applied in vast temperature ranges and humid conditions. It seals seams and joints on all types of housewrap, sheathing, insulation or vapor barrier materials. It is UV resistant and is coated with an aggressive permanent adhesive with high shear and holding power capabilities.
House wrap tape is applied over the seams of installed housewrap to contribute towards a secondary line of defense against exterior moisture infiltration of the wall envelope. It helps to maximize energy efficiency by sealing the gaps, cracks and crevices where air can easily enter the home and ultimately affect your heating and cooling costs. Made in the U.S.
Technical Information
Core: 3 inch diameter
Backing/Carrier: film
Adhesive: water-based (emulsion) acrylic
Thickness: 3 mils (carrier, adhesive)
Adhesion: 51 ounces per inch (to stainless steel test panel)
Tensile Strength: 34 pounds per inch (longitudinal)
Application Temperature: 14F to 176F
Elongation: 162 %
Adhesion to Housewrap: 26 ounces per inch
Flame Spread Index: 0
Smoke Development Index: 0
4. uxcell Cable Protector Sheathing Casing Expandable Braided Sleeving 59Ft Long 0.28 Inches Width Black
Feature
Country of Manufacture: CHINA; Material: NylonNet Weight: 150g; Package Content: 1 x Expandable Braided Sleeving
Length ( approx.): 18m/59ft
Main Color: Black
Cable Width: 7mm/0.28''
Description
Sleeving ends can use insulating tape, heat shrink or zip ties.Safety and stability.
Braiding sleeving is good replacement for your old or broken ones.
The easy lead wire operation, to have the good elasticity, the flame retardance, the resistance to wear and heat-insulated.
5. Motorcycle LED 39mm 41mm Fork Turn Signal Light Strip Kit w/ Smoked Lens
Feature
LED Fork Turn Signal Lights-- 2 Amber and White LED Strips with 120 degree viewing angle for wider visibility.Size matched for just about 39mm-41mm fork size
24 gauge teflon coated wire leads with black heat shrink sheathing
Industrial strength double side mounting tape on back along with a built in Zip Tie for added strength
Package inlcudes 1 pair of Fork Turn Signals
Description
LED Fork Lights are now even better! New design ensures the wrap-around LED turn signal will stay in place even on the hottest summer day. LED Fork Lights are sleek LED strips that wrap around your motorcycle forks and function as your turn signals. Now you can remove your front "lolli-pop" style motorcycle turn signals for a clean, custom look. Our new design has a zip tie built into the light strip to ensure the strip won't come off in the hottest of conditionsFeatures:
- 2 Amber and White LED Strips with 120 degree viewing angle for wider visibility.
- Size matched for just about 39mm-41mm fork size.
- Choose Smoked or Clear "D" channel lens
- 24 gauge teflon coated wire leads with black heat shrink sheathing.
- Industrial strength double side mounting tape on back along with a built in Zip Tie for added strength
Installation instruction:
- Measure your forks to determine proper size
- Thoroughly clean & dry forks with soap and water prior to installing.
- With heat gun warm the Fork Lights until tubing and LED strip is soft and pliable.?The light strip pliable afterworking one minute?
- Prior to pealing off the red strip in back of each light, bend around forks to ensure a proper fit.
- Reheat strip, peal red strip off of the tape, apply to fork.
- Use Zip Tie to pull the Fork Light tight to forks. Snip off excess Zip Tie end.
- Refer to your motorcycle manual for turn signal and running light wiring diagram.
Product Details:
- Condition?100% Brand New
- Package Include?1Pair Fork Light Strips
- Input voltage of 12 Volts DC
- Fitment?39mm-41mm Fork (please check the fork size to ensure the fitment before placing order,thank you)
6. uxcell 52.5Ft Wire Cable Cover Protector Sheathing Casing Expandable Braided Sleeving Black
Feature
Country of Manufacture: CHINA; Material: NylonNet Weight: 165g; Package Content: 1 x Expandable Braided Sleeving
Length ( approx.): 16m/52.5ft
Main Color: Black
Cable Width: 15mm/0.6''
Description
Sleeving ends can use insulating tape, heat shrink or zip ties.Safety and stability.
Braiding sleeving is good replacement for your old or broken ones.
The easy lead wire operation, to have the good elasticity, the flame retardance, the resistance to wear and heat-insulated.
7. uxcell 32.8Ft Wire Cable Cover Protector Sheathing Casing Expandable Braided Sleeving Black
Feature
Country of Manufacture: CHINA; Material: NylonNet Weight: 38g; Package Content: 1 x Expandable Braided Sleeving
Length ( approx.): 10m/32.8ft
Main Color: Black
Cable Width: 3mm/0.12''
Description
Sleeving ends can use insulating tape, heat shrink or zip ties.Safety and stability, plug and play.
Braiding sleeving is good replacement for your old or broken ones.
The easy lead wire operation, to have the good elasticity, the flame retardance, the resistance to wear and heat-insulated.
8. Weathermate we014 Straight Flashing Tape 6 in. x 100 ft.
Feature
Face Material Composition - Cross-laminated HDPE film.Face Color - Blue.
Adhesive Composition - Butyl rubber.
Adhesive Color - Black.
Thickness - 20 mil.
Description
WEATHERMATE Straight Flashing provides a tear-resistant seal that resists water intrusion around windows and doors. It is part of the complete WEATHERMATE Weather Barrier Solutions lineup from Dow - products designed to enhance the performance of the building envelope. Properties: WEATHERMATE Straight Flashing combines a blue high-density polyethylene (HDPE) film facer with a butyl rubber adhesive that forms a strong mechanical and chemical bond to most building materials. A polymeric-coated paper release liner provides a more consistent peel than plain paper liners. WEATHERMATE Straight Flashing contains no asphalt. The butyl rubber adhesive technology, a key component of this flashing, is considered superior to asphalt adhesives in compatibility with commonly used building envelope caulking materials, insulated and noninsulated sheathing, housewraps and window casing materials.9. BTF-LIGHTING WS2813 (Upgraded WS2812B) 16.4ft 30Leds/m Individually Addressable RGB LED Flexible Strip Light Dual signal wires 5050 SMD IP67 Waterproof DC5V White PCB
Feature
Individually Addressable.Dream full color Programmable LED Strip,WS2813 led, WS2811 IC Built in 5050SMD.256 brightness display and 24-bit color display. One IC controls one Led .Every led can be cutDual-signal wires version, signal break-point continuous transmission. If one led is damaged, the following LEDs still work well.Backup data PIN.
Wide compatibility. It is well compatible with Arduino, Adafruit NeoPixel Library, FastLED library and Raspberry Pi,K-1000C,SP105E bluetooth controller,etc.You can DIY your project with this Led strip
Easy installation. It comes with screws and clips instead of the 3M tape on the back.
Connect freely. It comes with 4-pin JST SM connectors and separated power/ground wires on both ends, which makes it easy to hook up each other and wire up for power.
Description
ParameterBrand: BTF-LIGHTING
Light source: 5050 RGB LED
Led Qty: 30Leds/m total 150 Leds
Wave length (NM): R,650nm ; G,520nm ; B,460nm
The gray level: 256
Color: full color (24-bit )
View angle:120
Voltage: DC 5V
Power: 9W/M total 45W
Waterproof: IP67 waterproof Silicone sheathing
FPCB board color: black
Dimension: 5000*12*3mm
Life span:50000hrs
Every Pin Function
5V: Power Voltage, connect to "+5V"
DO: Control data signal output
DI: Control data signal input
BO: Backup control data signal output
BI: Backup control data signal input
GND: Data &Power Grounding
Technical Features
The control circuit and RGB chip are integrated in a 5050 components, to form an external control pixel.
The control circuit and the LED share the only power source.
Using the built-in signal reshaping circuit to achieve the signal waveform shaping, and no distortion of waveform of signal takes place.
Built-in power-on reset and brown-out reset circuits.
Port scanning frequency reaches to 2KHz/s.
Serial cascade interface. Data receiving and decoding depend on just one signal line.
Dual-signal wires version, signal break-point continuous transmission.
If the transmission distance between any two points is less than 3m, another circuit is not needed.
When the refresh rate is 30fps, cascade numbers are far more than 1024 points.
Data transmitting speed is up to 800Kbps.
Package
1x 16.4ft 150 pixels WS2813 led strip
1x4pin female connector
Power supply or controller is not included
10. uxcell 100M x 14MM Expandable Braided Sheathing Sleeving Cable Wire Black for Car
Feature
Product Name: Braided Sleeving Cable; Material: Plastic,PolyesterPackage Content: 1 x Braided Sleeving Cable; Shell Color: Black
Wire Width: 14mm/ 0.5inch
Total Length: 100m/ 328.1ft
Roll Size: 30 x 7.5cm/ 11.8 x 2.9inch(D*H)
Description
The sleeving will be big when the length will have the contraction, when DIY please in advance do suffice the length.Sleeving ends can use insulating tape, heat shrink or zip ties. Safety and stability, connector and play.
Braiding polyester PET (Polyethylene Terephthalate) is good replacement for your old or broken ones and will fit most car models
The easy lead wire operation, to have the good elasticity, the flame retardance, the resistance to wear and heat-insulated.
The product surface is smooth, the luster is bright, applies in the computer power line, the acoustic video frequency line, the electric wire electric cable, the holding wire, machine the interconnection wiring.
Great for wrapping power/ground cable, keep your cables looking like show car cables, gives an attractive look with a clean install.
Specification:
Wire Width: 4mm/ 0.2inch
Total Length: 100m/ 328.1ft
Package includes:
1 x Braided Sleeving Cable
11. uxcell 100M x 4MM Black White Car Audio Expanding Braided Sleeving Cable Wire Sheathing
Feature
Product Name: Braided Cable Sleeving; Material: PlasticPackage Content: 1 x Braided Cable Sleeving; Shell Color: White, Black
Dimension: 10.5 x 16cm / 4.1" x 6.3" (H*D); Wire Total Length: 100M / 328.1ft
Wire Width: 4mm / 0.16"
Roll Size: 10.5 x 16cm / 4.1" x 6.3" (H*D)
Description
Quick and easy installation over large connectors and long runs is allowed for its unique braided construction and wide expandability.The high quality braided cable sleeving is widely used in electronics, automotive, marine and industrial wire harnessing applications where cost efficiency and durability are very critical.
The sleeving will be big when the length will have the contraction, when DIY please in advance do suffice the length.Sleeving ends can use insulating tape, heat shrink or zip ties.
The product surface is smooth, the luster is bright, applies in the acoustic video frequency line, the electric wire electric cable, the holding wire, machine the interconnection wiring.
Package included:1 x Braided Cable Sleeving
12. DealMux 32.8Ft Wire Cable Cover Protector Sheathing Casing Expandable Braided Sleeving Black
Feature
Pas de Fabricao: China; Material: NylonNet Weight: 38g; Package Content: 1 x Expandable Braided Sleeving
Length ( approx.): 10m/32.8ft
Cor principal: Preto
Cable Width: 3mm/0.12''
Description
Sleeving ends can use insulating tape, heat shrink or zip ties. Safety and stability, plug and play. Braiding sleeving is good replacement for your old or broken ones. The easy lead wire operation, to have the good elasticity, the flame retardance, the resistance to wear and heat-insulated.13. Chrome Glow Motorcycle Fork Wrap-Around LED Turn Signal / Running Light Kit with Smoked Lens for 43 MM Forks
Feature
Motorcycle LED Fork Wrap-Around Turn Signals for 43mm forksSmoked Lens
Function as turn signals and running lights
Remove your front "lolli-pop" style motorcycle turn signals for a clean, custom look
Works on all 12V DC Systems
Description
LED Fork Lights are now even better! New design ensures the wrap-around LED turn signal will stay in place even on the hottest summer day. LED Fork Lights are sleek LED strips that wrap around your motorcycle forks and function as your turn signals or running lights. Now you can remove your front "lolli-pop" style motorcycle turn signals for a clean, custom look. Our new design has a zip tie built into the light strip to ensure the strip won't come off in the hottest of conditions.Features:
- 2 Amber LED Strips with 120 degree viewing angle for wider visibility
- Size matched for just about any fork size (even inverted forks)
- Choose Smoked or Clear "D" channel lens
- Flexible "D" channel tube is only .325" thick x .325" wide
- Industrial strength double sided mounting tape on back along with a built in Zip Tie for added strength
- 24 gauge teflon coated wire leads with black heat shrink sheathing
- Draws less than .2 amps per foot
- Input voltage of 12-15 Volts DC
- Kit includes 2 Fork Light strips, 4 Posi-Tap connectors, Four 8" Zip Ties, 3M Promoter Pad
- Included Running Light Kit for a Full brightness running light with Off-to-On flashing as turn signal
- Installation Instructions Included
Fork Sizes MM to Inches:
39mm - 1.535" dia
41mm - 1.614" dia
43mm - 1.693" dia
46mm - 1.811" dia
49mm - 1.929" dia
50mm - 1.968" dia
52mm - 1.968" dia
54mm - 2.125" dia
56mm - 2.204" dia
58mm - 2.283" dia
A Load Equalizer will be required when replacing stock incandescent turn signal bulbs with LEDs.
Metric models with a signal turn signal indicator on the dash (the light that indicates your turn signal is on) will require a Cross Feed Diode Kit.
14. 39mm-49mm Fork Turn Signal lights harley dyna street bob ring light fork lighting dyna wide glide fork ring LED lights super glide models
Feature
Fitment?39mm-49mm ForkCondition?100% Brand New - Package Include?1Pair Fork Light Strips - Input voltage of 12 Volts DC
2 Amber and White LED Strips with 120 degree viewing angle for wider visibility. - Size matched for just about 39mm-41mm fork size. - Choose Smoked or Clear "D" channel lens
24 gauge teflon coated wire leads with black heat shrink sheathing. - Industrial strength double side mounting tape on back along with a built in Zip Tie for added strength - Measure your forks to determine proper size
Thoroughly clean & dry forks with soap and water prior to installing. - With heat gun warm the Fork Lights until tubing and LED strip is soft and pliable.?the light strip pliable after working one minute?
Description
Fitment?
Harley 39mm-49mm Fork (universal motorcycle)
Condition?100% Brand New
Lens Color?Smoked
Package Include?1Pair Fork Light Strips&1 Pair Fork Daytime Light Strips
Input voltage of 12-15 Volts DC
24 gauge teflon coated wire leads with black heat shrink sheathing.
LED Fork Lights are now even better
New design ensures the wrap-around LED turn signal will stay in place even on the hottest summer day.
LED Fork Lights are sleek LED strips that wrap around your motorcycle forks and function as your turn signals.
Now you can remove your front "lolli-pop" style motorcycle turn signals for a clean, custom look.
Our new design has a zip tie built into the light strip to ensure the strip won't come off in the hottest of conditions.
?
?2 Amber LED Strips with 120 degree viewing angle for wider visibility.
- Size matched for just about any fork size (even inverted forks).
- Choose Smoked or Clear "D" channel lens
- Industrial strength double side mounting tape on back along with a built in Zip Tie for added strength
15. Custom Dynamics STZ9RED LED Accent Light (9-LED, 3.5" Long Red Stingerz)
Feature
Completely flexible, waterproof and extremely versatilePre-taped with 3M automotive-grade tape on three sides for increased mounting options
High-grade LEDs encased in a silicon housing to withstand heat, vibration, moisture and road grime
Each strip has 48" of two conductor wire mounted in black sheathing
Available in five different lengths. Sold in pairs
Description
Completely flexible, waterproof and extremely versatile. Pre-taped with 3M automotive-grade tape on three sides for increased mounting options. High-grade LEDs encased in a silicon housing to withstand heat, vibration, moisture and road grime. Each strip has 48" of two conductor wire mounted in black sheathing. Available in five different lengths. Sold in pairs.16. Motorcycle LED light fork 39mm-49mm Fork Turn Signal harley sportster fork light smoke Lens Victory fork ring turn signal lights
Feature
Fitment?39mm-49mm ForkCondition?100% Brand New - Package Include?1Pair Fork Light Strips - Input voltage of 12 Volts DC
2 Amber and White LED Strips with 120 degree viewing angle for wider visibility. - Size matched for just about 39mm-41mm fork size. - Choose Smoked or Clear "D" channel lens
24 gauge teflon coated wire leads with black heat shrink sheathing. - Industrial strength double side mounting tape on back along with a built in Zip Tie for added strength - Measure your forks to determine proper size
Thoroughly clean & dry forks with soap and water prior to installing. - With heat gun warm the Fork Lights until tubing and LED strip is soft and pliable.?the light strip pliable after working one minute?
Description
Fitment?
Harley 39mm-49mm Fork (universal motorcycle)
Condition?100% Brand New
Lens Color?Smoked
Package Include?1Pair Fork Light Strips&1 Pair Fork Daytime Light Strips
Input voltage of 12-15 Volts DC
24 gauge teflon coated wire leads with black heat shrink sheathing.
LED Fork Lights are now even better
New design ensures the wrap-around LED turn signal will stay in place even on the hottest summer day.
LED Fork Lights are sleek LED strips that wrap around your motorcycle forks and function as your turn signals.
Now you can remove your front "lolli-pop" style motorcycle turn signals for a clean, custom look.
Our new design has a zip tie built into the light strip to ensure the strip won't come off in the hottest of conditions.
?
?2 Amber LED Strips with 120 degree viewing angle for wider visibility.
- Size matched for just about any fork size (even inverted forks).
- Choose Smoked or Clear "D" channel lens
- Industrial strength double side mounting tape on back along with a built in Zip Tie for added strength