Finding the best 128×64 lcd suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Reviews
1. HiLetgo 1.3" SPI 128x64 SSH1106 OLED LCD Display LCD Module for Arduino AVR PIC STM32
Feature
1.3" mini OLED display screen with 128X64 resoluction and SSH1106 chipsetUltra-low power consumption: full screen lit 0.08w
Four fixed bolt holes for easy installation
Interface Type:SPI(Can be changed to IIC)
Supports many control chip : fully compatible with Arduino 51 series,msp430 series , stm32/2 CSR IC , ETC
Description
Specifications:1. Driver IC: SSH1106
2. Resolution: 128*64
3. Viewing angle: >160
4. OLED screens inside the driver chips: SSH1106.
5. Supports many control chip : fully compatible with Arduino 51 series,msp430 series , stm32/2 CSR IC , ETC
6. Ultra-low power consumption: full screen lit 0.08w
7. Voltage: DC 3V-5V
8. Work temp : -30c-70c
9. Interface: SPI
10. Font Color: White
SPI Pin definition:
GND: Power ground
VCC: Power
CLK: Clock line
MOSI: Data cable
RES: Reset line
DC: Data/commands
CS: Chip select (when not use can be grounded directly)
Package included:
1* 1.3" OLED LCD Display Module SPI Serial
Note: We have IIC I2C interface on sale too, please search at HiLetgo Store if you need.
2. 5V 12864 LCD Display Module 128x64 Dots Graphic Matrix Blue Backlight
Feature
12864 LCD Display Module 128x64 Dots Graphic Blue Color BacklightSuitable for copiers, fax machines, printers, industrial test equipment
View area: 7.0cm(L) x 4.0cm(W)
Dots size: 0.48mm (L) x 0.48mm (W)
Dots pitch: 0.52mm (L) x 0.52mm (W)
Description
Specification:12864 LCD Display Module 128x64 Dots Graphic Blue Color Backlight.
LCD display module with blue backlight.
Small and light appearance, it is easy and convenient to use.
Suitable for copiers, fax machines, printers, industrial test equipment,networking equipment etc.
Backlight: Blue
View area: 7.0cm(L) x 4.0cm(W)
Dots size: 0.48mm (L) x 0.48mm (W)
Dots pitch: 0.52mm (L) x 0.52mm (W)
LCD type: STN (Blue)
Viewing angle: 6 oclock
Operating temperature: -20 to 70 degree
Storage temperature: -30 to 80 degree
Package Included:
1* Module
3. HiLetgo 0.96" I2C IIC SPI Serial 128X64 OLED LCD Display 4 Pin Font Color Blue
Feature
0.96" SSD1306 128X64 OLED LCD Display with I2C IIC SPI SerialDrive Duty: 1/64 Duty
Font Color: Blue
Panel Size: 26.70mm x 19.26mm x 1.85mm
High resolution: 128 * 64
Description
HiLetgo 0.96" I2C IIC SPI Serial 128X64 OLED LCD Display 4 Pin Font Color BlueFeature:
Super High Brightness (Adjustable)
Super High Contrast (Adjustable)
Embedded Driver/Controller
Colors: White/Blue/Blue Yellow
Drive Duty: 1/64 Duty
Pixels: 128x64
Panel Size: 26.70mm x 19.26mm x 1.85mm
Active Area: 21.74mm x 11.2mm
Pixel Size: 0.15mm x 0.15mm
This OLED Part No. is UG-2864HSWEG01, not UG-2864AMBAG01
Needn't backlight, the display unit can self-luminous
High resolution: 128 * 64
Viewing angle:> 160
Supports many control chip: Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.
Ultra-low power consumption: full screen lit 0.08W
Voltage: 3V ~ 5V DC
Working Temperature: -30 ~ 70
Module Size: 27.0MM * 27.0MM * 4.1MM
I2C/IIC Interface, need 2 IO only.
Driver IC: SSD1306
Package included:
1* 0.96" I2C IIC SPI Serial 128X64 OLED LCD Display
Note:
Please contact us if you need the Schematic/Program code/User Manual etc.
4. 1.3" Blue OLED Display I2C IIC Serial 128X64 LCD LED Module SH1106 for Arduino Raspberry Pi DIYmall
Feature
Document link: https://drive.google.com/open?id=0B8DSGdAr8_31UEItMmx6ZDJIOWsSupported Platforms: for arduino,raspberry pi, 51 series, MSP430 series, STIM32 / 2, SCR chips.
Support wide voltage: 3.3V-5V DC
What You Get: 1 X 1.3" Blue Oled. Our 1 Year Worry-free-warranty and Friendly Customer Service.
we offer free sample to anyone who make project
Description
Description:Size: 1.3
Resolution: 128X64
Color: Blue
Viewing angle: greater than 160 degrees
Supported platforms: for arduino, 51 series, MSP430 series, STIM32 / 2, SCR chips
Low power consumption: 0.04W during normal operation
Support wide voltage: 3.3V-5V DC
Working temperature: -30-80 degrees
Volume: 27MM * 27MM * 4.1MM
Driver IC: SH1106
Communication: IIC, only two I / O ports
No font: The software takes word modulo
Backlight: OLED self light, no backlight
Interface:
VCC: 3.3-5V
GND: Ground
SCL: Serial Clock
SDA: Serial Data
5. Diymall 0.96" Inch Blue I2c IIC Serial 128x64 OLED LCD LED Display Module for Arduino Micro:bit(Pack of 2pcs)
Feature
The display is made in Taiwan, quality is much betterThe IIC address can be changed,it is convenient to use with different machines
Four square holes are easy to install
Document link goo.gl/9XZ9k9
One year warranty,any question please contact before negative feedback or review
Description
Size: 0.96Resolution: 128X64
Color: Blue Viewing angle: greater than 160 degrees
Supported platforms: for arduino, 51 series, MSP430
series, STIM32 / 2, SCR chips
Low power consumption: 0.04W during normal operation Support wide voltage: 3.3V-5V DC
Working temperature: -30-80 degrees
Volume: 27MM * 27MM * 4.1MM
Driver IC: SSD1306
Communication: IIC, only two I / O ports
No font: The software takes word modulo
Backlight: OLED self light, no backlight Interface:
VCC: 3.3-5V GND: Ground
SCL: Serial Clock
SDA: Serial Data
Package Included:
2 X IIC OLED Moudle
6. OLED LCD Display,LANMU 0.96" I2C IIC SPI Serial 128X64 White OLED LCD Shield Board OLED Module for Arduino 51 Msp420 Stim32 SCR
Feature
Needn't backlight, the display unit can self-luminousHigh resolution: 128 * 64. Viewing angle:> 160
Supports many control chip: Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.
Ultra-low power consumption: full screen lit 0.08W
Voltage: 3V ~ 5V DC. Working Temperature: -30 ~ 70
Description
Super High Brightness (Adjustable) Super High Contrast (Adjustable) Embedded Driver/Controller Colors: White Drive Duty: 1/64 Duty Pixels: 128x64 Panel Size: 26.70mm x 19.26mm x 1.85mm Active Area: 21.74mm x 11.2mm Pixel Size: 0.15mm x 0.15mm This OLED Part No. is UG-2864HSWEG01, not UG-2864AMBAG01 Module Size: 27.0MM * 27.0MM * 4.1MM I2C/IIC Interface, need 2 IO only. Driver IC: SSD1306 Package Includes: 1 X Module7. DIYmall 0.96" Inch I2c IIC Serial 128x64 Oled LCD LED White Display Module for Arduino 51 Msp420 Stim32 SCR
Feature
Document link: https://drive.google.com/open?id=0B8DSGdAr8_31UEItMmx6ZDJIOWsThe screen is made in Taiwan, quality is much better
The IIC address can be changed,it is convenient to use with different machines
Four square holes are easy to install
What You Get: 1 X 0.96 White OLED Module. Our 1 Year Warranty and Friendly Customer Service.
Description
Size: 0.96Resolution: 128X64
Color: Blue
Viewing angle: greater than 160 degrees
Supported platforms: for arduino, 51 series, MSP430 series,
STIM32 / 2, SCR chips
Low power consumption: 0.04W during normal operation
Support wide voltage: 3.3V-5V DC
Working temperature: -30-80 degrees
Volume: 27MM * 27MM * 4.1MM
Driver IC: SSD1306
Communication: IIC, only two I / O ports
No font: The software takes word modulo
Backlight: OLED self light, no backlight
Interface:
VCC: 3.3-5V
GND: Ground
SCL: Serial Clock
SDA: Serial Data
Package Included:
1 X 0.96 IIC OLED Moudle
NOTE: DIYmall is US registered trademark
8. IZOKEE 0.96'' I2C IIC SPI Serial 12864 128X64 Pixel OLED LCD Display Shield Board Module SSD1306 Chip 7 Pin for Arduino Display Raspberry Pi 51 Msp420 Stim32 SCR (Pack of 3pcs, White-SPI)
Feature
0.96" SSD1306 128X64 OLED LCD Display with SPI Serial IIC/I2C Interface-7PIN.Due to the high resolution of 128 x 64 pixels, the display offers a lot of space to display elements!
Easy connection of the display with Arduino, Raspberry Pi, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.. Only through I2C interface via SEVEN pins!
The IIC address can be changed. Thanks to the standard driver chip (SSD 1306) libraries already exist for Arduino, Raspberry Pi and 51 Series, which makes programming very easy!
Multiple choices: I2C IIC (4Pin) or SPI (7 Pin) interfaces and three different Colors (Yellow Blue/ White/ Blue) for your option.
Description
"Just Choose IZOKEE: Your expert for Micro-Electronics! One-Stop-Shopping with Various Electronic Modules & Components! "IZOKEE 0.96'' SPI Serial I2C IIC 12864 128X64 Pixel OLED LCD Display Module
Specifications:
Super High Brightness (Adjustable)
Super High Contrast (Adjustable)
Interface Type: 4-wire SPI, 3-wire SPI, IIC interface (default 4-wire SPI interface, You can adjust the position of the resistors to switch to other interfaces); 7-PINS
0.96 inch OLED display chip: SSD1306
High resolution: 128 * 64 Pixel
Voltage: 3V ~ 5V DC
Viewing angle: greater than 160 degrees
Support many control chips: Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.
Note:
OLED is self-luminous, no backlight! It will not have any reaction if you only connect it with power supply. You must program it and operate correctly, then it will display normally.
How to connect?
GND: OLED Power Ground
VCC: OLED Power Positive 3.3-5V
D0: When using SPI Interface: SPI Clock Line; When using IIC Interface: IIC Clock Line
D1: When using SPI Interface: SPI Data Line; When using IIC Interface: IIC Data Line
RES: OLED Reset
DC: SPI data / command selection pin; When using IIC interface: set up IIC address
CS: OLED SPI functions with selection or low level power; If you do not want to use, it must be connected to the ground.
Package included:
3* 0.96'' SPI Serial I2C IIC 12864 128X64 Pixel OLED LCD Display Module
9. Kuman 0.96 Inch Yellow Blue IIC OLED Moudle I2c IIC Serial 128x64 LCD Display for Arduino Raspberry pi KY34-BY
Feature
Newest display technology: OLED is the newest display technology in market now, it can emitting light by itself, no back-light neededNot only works for Arduino, also works for raspberry pi and ARM, PIC, AVR, 51 Series, MSP430 Series. IIC address can be changed,it is convenient to use with different machines
Wide viewing range: almost 180 degree from left to right and up to down, you may know the modern LED TV now, this screen is made by same technology, Better than LCD
Easy to use: the commands sending to products are easy to remember and understandFour square holes are easy to install
Detailed tutorials including project introduction CAN BE PROVIDED FOR FREE,contact us BY Email to get documents
Description
Specifications:Power Supply: 3.3V to 5V
Power consumption: maximum 20mA when all dots light on
Communication mode: IIC
Work with all micro-controller and microprocessor
Communication signal can work on 3.3V and 5.0V
Pixels: 128x64, high bright self light emitting
Simple command sets, easy to remember
Package Included:
1 X IIC OLED Moudle