IZOKEE 0.96'' I2C IIC SPI Serial 12864 128X64 Pixel OLED LCD Display Shield Board Module SSD1306 Chip 7 Pin for Arduino Display Raspberry Pi 51 Msp420 Stim32 SCR (Pack of 3pcs, White-SPI)

Related posts

Feature

0.96" SSD1306 128X64 OLED LCD Display with SPI Serial IIC/I2C Interface-7PIN.
Due to the high resolution of 128 x 64 pixels, the display offers a lot of space to display elements!
Easy connection of the display with Arduino, Raspberry Pi, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.. Only through I2C interface via SEVEN pins!
The IIC address can be changed. Thanks to the standard driver chip (SSD 1306) libraries already exist for Arduino, Raspberry Pi and 51 Series, which makes programming very easy!
Multiple choices: I2C IIC (4Pin) or SPI (7 Pin) interfaces and three different Colors (Yellow Blue/ White/ Blue) for your option.

Description

"Just Choose IZOKEE: Your expert for Micro-Electronics! One-Stop-Shopping with Various Electronic Modules & Components! "

IZOKEE 0.96'' SPI Serial I2C IIC 12864 128X64 Pixel OLED LCD Display Module

Specifications:
Super High Brightness (Adjustable)
Super High Contrast (Adjustable)
Interface Type: 4-wire SPI, 3-wire SPI, IIC interface (default 4-wire SPI interface, You can adjust the position of the resistors to switch to other interfaces); 7-PINS
0.96 inch OLED display chip: SSD1306
High resolution: 128 * 64 Pixel
Voltage: 3V ~ 5V DC
Viewing angle: greater than 160 degrees
Support many control chips: Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.

Note:
OLED is self-luminous, no backlight! It will not have any reaction if you only connect it with power supply. You must program it and operate correctly, then it will display normally.

How to connect?
GND: OLED Power Ground
VCC: OLED Power Positive 3.3-5V
D0: When using SPI Interface: SPI Clock Line; When using IIC Interface: IIC Clock Line
D1: When using SPI Interface: SPI Data Line; When using IIC Interface: IIC Data Line
RES: OLED Reset
DC: SPI data / command selection pin; When using IIC interface: set up IIC address
CS: OLED SPI functions with selection or low level power; If you do not want to use, it must be connected to the ground.

Package included:
3* 0.96'' SPI Serial I2C IIC 12864 128X64 Pixel OLED LCD Display Module