We spent many hours on research to finding separatory funnel stand, reading product features, product specifications for this guide. For those of you who wish to the best separatory funnel stand, you should not miss this article. separatory funnel stand coming in a variety of types but also different price range. The following is the top 15 separatory funnel stand by our suggestions:
Reviews
1. 2000ml Glass Separatory Funnel Set, with PTFE Stopcock and Ring Stand Hardware
Feature
2000ml glass separatory funnel,PTFE stopcockIron casting stand: 8"x5" | 21cmx12cm
Rod: length: 24" | 60cm; Dia: 5/16" | 8mm
Electroplating Ring diameter: 4" | 10cm
Description
The package includes the following items:1. 2000ml glass separatory funnel, with PTFE stopcock, made of blown glass,boro3.3, it is clearer and smoother than pressed glass.
Full legnth=47cm | 18.5"
Tip dia=16mm
2. the 8"X5" iron casting support stand with 24"(60cm) length and 5/16"(8mm) diameter rod. It is heavy and safe for the 2000ml funnel.
3. Zinc coating steel flask clamp
4. Electroplaing Aluminium alloy cross clamp
5.Electroplating steel ring diameter: 4" | 10cm.
2. Polypropylene Separatory Funnel Holder for 500-1000ml Separatory Funnels
Feature
Made of non-corrosive polypropyleneCan accommodate separatory funnels wiith 500 to 1000ml capacity
Fits support rods 3/8" to 1/4"
Open front design to see entire contents
Description
Molded from non-corrosive polypropylene, this holder is capable of holding separatory funnels with capacities from 500ml up to 1000ml. The open front design provides users with a clear and unobstructed view of the solution, as well as allowing for easier placement and removal of the funnel. The more traditional ring supports have a tendency to catch onto the stopcock, which can result in a number of issues including damage to the funnel, knocking over the support stand and potentially spilling the liquid that was separated into the container below.Two tapered wedges are provided to ensure firm grips on rods measuring either 1/2" or 3/8" in diameter. The wedges slip inside the handle of the holder, and then the top of it screws down, tightening the grip on the support rod.
While this will hold a pear-shaped 250ml separatory funnel, it would be best to check the diameter around the largest part of the funnel. The holder has a diameter of approximately 72mm (2.8 inches), and will because of it's 3/4 design, it will flex outward slightly when sufficient weight is pressed down. on the arms.
3. SEOH Separatory Funnel PTFE Stopcock 500 ml with Hardware
Feature
1 - 8 x 5 Support Stand with 20" Rod1 - 3 " Ring Support with Clamp
1 - Extension Clamp
1 - Clamp Holder Big
500ml Separatory Funnel
Description
500 ml Conical Separatory Funnel is made of heat resistant Borosilicate Glass with PTFE Stopcock and Ground Glass Stopper. Stopcocks do not require expensive lubricant therefore reducing the risk of contamination and freezing. Hand calibrated and accurate to +/- 1% total volume. Texas Residents: Under Texas State Law, this product requires a Precursor Chemical/Laboratory Apparatus NAR-120 permit to ship to a Texas address. After purchase, the seller will contact you via email to verify your permit. Failure to provide a valid permit will result in a cancellation and refund of your order.4. Laboratory Grade Metalware Set - Support Stand (8" x 5"), 12mm Dia. Rod (24" L), Cork Lined Burette Clamp with Boss Head and Retort Ring (2.5" dia)
Feature
Stainless steel rod (24" length)Blue or black powder coated support stand base (8" x 5")
4 pronged, cork lined burette clamp
Metal retort ring (2.5" diameter)
Perfect setup for a lab
Description
Laboratory Grade Metalware Set - Support Stand (8" x 5"), Rod (24" L), Burette Clamp and Retort Ring (2.5" dia)(1) Base, (1) Rod, (1) Clamp, (1) Burette Clamp,(1) Retort ring
This premium set includes a stand, rod clamp and ring, all in one packages - eliminating the need to piece together a system for your classroom or lab. Everything is in one box.
Stainless steel rod with a powder coated base provides the perfect setup for any experiment.
Made from high-quality metal and built to last.
5. SEOH Separatory Funnel Holder
Feature
Material PolypropyleneAccepts Rod 1/2" to 3/8"
Sold As Each
Thanks for Looking!
Scientific Equipment of Houston
Description
This non-corrosive separatory funnel holder has a front opening that provides a clear view of the solution and allows for unobstructed placement of separating funnels. A tapered wedge is provided to ensure firm gripon 1/2" or 3/8" diameter rods. Texas Residents: Under Texas State Law, this product requires a Precursor Chemical/Laboratory Apparatus NAR-120 permit to ship to a Texas address. After purchase, the seller will contact you via email to verify your permit. Failure to provide a valid permit will result in a cancellation and refund of your order.6. American Educational 7-G87-A Stamped Steel Support Ring Stand with 2 Rings, 6" Length x 4" Width Base Size
Feature
Support Ringstand, Stamped Steel, Base 4"x6", Rod 5/16"x18", and two rings, 3" and 4"Made of stamped steel, strong and dependable support
Coated with an acid resistant finish
The rods are nickel plated steel and are threaded to fit the base
Base: 6" length by 4" width; rod: 5/16" diameter by 18" length
Description
Strong and dependable support. Available in stamped steel. Type is coated with an acid resistant finish. The rods are nickel plated steel and are threaded to fit the base. Two rings 3" and 4". Base size: 6" length by 4" width, rod size: 5/16" diameter by 18" length.7. Glass 1000mL Separatory Funnel with PTFE Stopcock, Support Stand & Flask
Feature
Includes 1000mL Separatory Funnel with PTFE StopcockDescription
This set-up includes the support stand, support ring and 1000mL borosilicate (heat resistant) separatory funnel with a PTFE stopcock. Also included is a 1000mL Erlenmeyer flask. Our current separatory funnel has a polyethylene stopper, which we prefer to the glass stopper. PTFE stopcocks are less likely to seize up than glass to glass fittings and do not require expensive lubricant therefore reducing the risk of contamination. This comes with a cast iron support stand with a 6 x 9 base and 24 rod. The cast metal ring with heat-resistant enamel coating is 4" in diameter and can be positioned anywhere on the rod by simply adjusting the thumbscrew. You also get a glass separatory funnel with PTFE stopcock, in 1000mL capacity. It is used for separation of immiscible liquids, mostly for organic chemistry. If you prefer a glass stopcock on your separatory funnel, please request it.8. Mountain Home Biological LB10-K1/I Separatory Funnel, 1000 mL, Glass Stopcock, Ring Stand
Feature
Easy to useReliable to use
High Efficiency
Description
Easy to use, Reliable to use, High Efficiency. Easy to use, Reliable to use, High Efficiency. Easy to use, Reliable to use, High Efficiency.9. Separatory Funnel Set, 500ml with Glass Stopcock and Ringstand
Feature
Laboratory-grade borosilicate glass, 500ml capacitySolid glass stopcock, precision ground for fast and acurate cut-off
Rock solid support with 20" stand and 3" support ring
Commonly used for the final separation of essential oil from hydrosol after steam distillation
Description
Separatory Funnels Pear-shaped design, widely used in organic chemistry for separating organic from aquatic products. These funnels all have ground glass stoppers and stopcocks Separatory Funnel Set A complete set-up, including 20" Support Stand, Separatory Funnel, and 3" Support Ring.10. 2000ml Glass Separatory Funnel Set, with PTFE Stopcock and Iron ringstand Hardware
Feature
2000ml glass separatory funnel,PTFE stopcockIron casting stand: 8"x5" | 20cmx12cm
Rod length: 24" | 60cm, Rod diameter: 3/8" | 10mm
Flask Clamp and .Aluminium alloy cross clamp
Open front separatory funnel holder
Description
The package includes the following items:1. 2000ml glass separatory funnel, with PTFE stopcock
The funnel is made of blown glass from boro3.3 glass tube.
It is by human blown, not pressed machine. The thickness is uniform.
The glass is crystal clear and smooth.
The PTFE stopcock has 4mm diameter hole.
Full length 47cm | 18.5"
The drip tube dia is 16mm
2. the 8"X5" iron support stand with 24"(60cm) length and 3/8"(10mm) diameter rod.
The casting iron is very heavy, and painting blue color.
Also has rubber pad on the bottom. It is very beauty and secure.
3.Zinc coated steel flask clamp
4. Electroplaing Aluminium alloy cross clamp
5. Plastics open front funnel holder:
includes 2 kinds fasten nuts. The holder can be used on 10mm or 12mm (3/8" or 1/2") dia rod.
11. 1000ml Glass Separatory Funnel Set, 1000ml with Glass Stopcock and Plastics Ringstand
Feature
1000ml glass separatory funnelSolid glass stopcock and glass stopper
Stamping steel stand: 8"x5" | 21cmx12cm
Rod height: 20" | 50cm, Road dia 3/8" | 10mm
Open front funnel holder
Description
This is a set of 1000ml glass sepatatory funnel, includes:1. 1000 glass separatory funnel with glass stopcock
2.Stamping steel stand: Rod 20", 8"x5"(LxW)
3. Open front PP funnel holder:
12. Beyondsupply-Lab Glass Separatory Separation Funnel Ptfe Stopcock 500ml 24/30 new
Feature
shown as picture.made of borosilicate glass
size 500ml
PTFE stopcock
stand is not included ,only funnel.
Description
made of borosilicate .size 500ml. 24/30.the picture showing is 1000ml.13. Lab Liftable Stainless Steel Separatory funnel stand support&clamp for 1000ml funnel
Description
Liftable Stainless Steel Separating funnel stand support & steel clamp for 1000ml funnel W 4 holes. Special capacity, joint size, and custom made are available upon request. We also supply all kinds of borosilicate laboratory glassware, for more details, please visit our company website: Beijing Getty Laboratory Glassware Co.,Ltd.14. 1000mL Glass Separatory Funnel w/PTFE Stopcock & Support Stand
Feature
This set-up includes the support stand, support ring and 1000mL borosilicate (heat resistant) separatory funnel with a PTFE stopcock.This comes with a cast iron support stand with a 6 x 9 base and 24 rod
The cast metal ring with heat-resistant enamel coating is 4" in diameter and can be positioned anywhere on the rod by simply adjusting the thumbscrew
You also get a glass separatory funnel with PTFE stopcock, in 1000mL capacity.
Description
Offered for sale is a complete separatory funnel set-up. This set-up includes the support stand, support ring and 1000mL borosilicate separatory funnel with a PTFE stopcock. This comes with a cast iron support stand with a 6 x 9 base and 24 rod. The cast metal ring with heat-resistant enamel coating is 4" in diameter and can be positioned anywhere on the rod by simply adjusting the thumbscrew. You also get a glass separatory funnel with PTFE stopcock, in 1000mL capacity. PTFE stopcocks are less likely to seize up than glass to glass fittings and do not require expensive lubricant therefore reducing the risk of contamination. It is used for separation of immiscible liquids, mostly for organic chemistry. If you prefer a glass stopcock on your separatory funnel, please request it. Our current separatory funnel has a polyethylene stopper at the top, which we like much better than the glass stopper.15. 250ml x 6 Stainless Steel Funnel Stand Adjustable Lifting Separatory Funnel Holder #021083
Feature
This separating funnel stand has adjustable lifting which can go up and down. It has six holes fits for 250ml funnels. It's made of stainless steel makes it light and protable.Can be adjusted to 34cm(13") height.
Base size : 24*30.5cm (9" x 13")
Hole diameter : 7cm (2.7")
Funnel is NOT INCLUDED.
Description
Items included:1 set of 250ml*6 Stainless Steel Funnel Stand (021083)
The product size:325*240*215mm(12.8*9.4*8.5inch)
Package size: 28*38*29cm(11.02*14.96*11.42inch)
Shipping weight1.7KG(11.34lbs)