Finding your suitable tinting heat gun is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best tinting heat gun including detail information and customer reviews. Let’s find out which is your favorite one.
Reviews
1. Steinel HL 1810 S General-Purpose Heat Gun, Three Stage Professional 120 V Hot Heat Tool with Duratherm Heating Element, 1400 W Hot Heat Blower with cool air stage, Non-slip soft stand and Industrial grade rubber power cord, 34820
Feature
Multi-purpose heat gun with 2 temperature settings for convenient hand-held or bench workEfficient DuraThermTM heating element ensures long life and even heat
Sleek and balanced design for comfortable long-term use
For shrink wrapping, activating adhesives, softening compounds, window tinting, bending plastics and other applications requiring long life and even heat
Additional accessories available for a Variety of Applications
Description
The Steinel 34820 HL 1810 S three-stage heat gun emits airstreams at 3.6, 10.0, or 15.9 cubic feet per minute (CFM) at temperatures of 120, 750, or 1,100 degrees F. Similar in shape to a hair dryer, the gun is lightweight and balanced to reduce fatigue. Each coil in the heating element is encapsulated in ceramic to extend coil life and provide even heat. This heat gun is suitable for many applications from applying shrink tubing and activating adhesives to welding and shaping plastics and other heat sensitive materials.
Specifications
| Heating Element | Ceramic encapsulated to resist coil breakage |
| Weight | 1.92 lb. |
| Dimensions | 8.0 x 10.3 x 3.5 inches (H x W x D). (H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.) |
| Airflow | 3.6, 10.6, and 17.6 CFM |
| Temperature | 120, 750, and 1,100F (49, 399, and 594C) |
| Power Cord | Double insulated, industrial grade rubber, length: 6 ft. |
| Output | 1,400 watts. |
| Voltage | 120 VAC / 60 Hz at 11.7 amps |
| Certifications | UL / C-UL listed |
| Warranty | One year limited |
| Nozzle Diameter | 1.30 inches (33.02 mm) |
| 3-Stage Switch | Cool air (120F at 3.6 CFM) 750F at 10.6 CFM 1,100F at 17.6 CFM |
Heat guns are hand tools that emit a stream of heated air at variable temperatures up to 1,300 degrees F (700 C). Most guns have an electrical heating element to control output temperatures and adjustable fan motors to regulate and focus airflow. Heat guns with high airflow output (greater than approximately 20 cubic feet per minute) are sometimes called heat blowers. Heat guns can be used for a variety of applications ranging from copper and plastic welding to touching up shrink wrap. Accessory nozzles (sold separately) are used to shape the air stream over a wider area, or direct it around pipes and tubing for even heating which prevents adjoining surfaces (such as panes of glass) from overheating, and some heat gun models incorporate workbench stands to allow hands-free operation.
Steinel manufactures heat guns, glue guns, gas torches, and sensors. The company, founded in Germany in 1959, meets International Organization for Standardization (ISO) 9001:2008 standards and is Restriction of Hazardous Substances (RoHS) compliant.
2. Ehdis New Vinyl Kits!! 8 PCS Vehicle Glass Protective Film Car Wrapping Tint Installing Tools with Dual Temperature LCD Display Heat Gun Kit
Feature
Car Automotive Window Vinyl Film Wrap Application Installation Vehicle Tinting Tools Kit SetThis kit set has: Rubber Jelly Squeegee, 4" Felt Squeegee, Lil' Chizler, Contour Squeegee, Conqueror Squeegee, 6" Block Squeegee, Film cutter with 10 baldes, Heat Gun set
Scrape off the bubbles downright under the film, cut the film as your wanted shape, remove the paint with heat gun easily!
The Dual Temperature Heat Gun Kit with LCD Display is the ideal tool for stripping paint, removing decals, strips, shrinking wire wrap, etc. You can check the temperature with the Real time LCD window.
The Heat Gun kit with 2 different temperature heat settings (450C [842F] and 650C [1202F]), comes with 1pc Dual Temperature Heat Gun, 1pc Large Deflector Nozzle(8cm), 1pc Reduction Nozzle(2cm). Low Heat: 250L/min; High Heat: 500 L/min, Wattage: 1800W
Description
Car Vinyl Wrapping Tools with Heat Gun Specification:
1. Product Type: Car Wrapping Tool Kits for Solar Film
2. Material: Plastic/Rubber/Stainless Steel
3. Car Compatibility: Universal
4. Compatibility: Suitable for application of all types of window tint film, paint protection film, decals, solar film, wrap film
Package included:
1 Set (8 Pieces) as below:
1 x Rubber jelly squeegee with Handle
1 x Black conqueror squeegee
1 x 4" blue squeegee with Fabric Felt
1 x Mini Pink scraper
1 x Stainless steel knife with 10 Blades
1 x Yellow contour squeegee
1 x 6" white Block Squeegee
1 x Heat Gun with 1pc Large Deflector Nozzle(8cm), 1pc Reduction Nozzle(2cm)
Heat Gun Technical Parameter
Power voltage: AC110V
Power Consumption: 1800W
Air Flow Approx.: 250/550 L/min
Temperature at nozzle outlet approx.: 60-650 C
Temperature measuring accuracy at nozzle outlet: +/- 10%, on the display: +/- 5
Display operating temperature: 0---+50
Weight (Body no accessories): 0.8 kg
Heat Gun use for:
1. Remove paint
2. Peel old wallpaper
3. Remove plastic floor title
4. Bend PVC pipe
5. Melt litter in pipe
6. Remove greasy litter
7. Heat shrinkage pipe contraction
8. Car sticker install or remove
3. Ehdis 16 Kinds of Car Vinyl Wrap Tool Window Tint Kit for Auto Film Tinting Set Application Installation or Removal with LCD Display Heat Gun
Feature
Car Window tint wrap application kit is easy and convenient to use, added 1,800-watt Heat GunDifferent Squeegee, Perfect for all vinyl applications and won't scratch during installation, use heat gun to install or remove vinyl, facilitate your work.
This tool kit is widely used in pad pasting, wallpaper pasting, glass cleaning and vehicles snow removal
The Dual Temperature Heat Gun Kit with LCD Display is the ideal tool for stripping paint, removing decals, strips, shrinking wire wrap, etc. You can check the temperature with the Real time LCD window.
The Heat Gun kit with 2 different temperature heat settings (450C [842F] and 650C [1202F]), comes with 1pc Dual Temperature Heat Gun, 1pc Large Deflector Nozzle(8cm), 1pc Reduction Nozzle(2cm). Low Heat: 250L/min; High Heat: 500 L/min
Description
Package included:(1) 1 x Wool Felt Pro-Tint Bondo Squeegee - Back
(2) 1 x Suede Felt Pro-Tint Bondo Squeegee - Back
(3) 2 x Blue medium-hard professional squeegee with self-adhesive felt edge
(4) 4 x Vinyl Magnet holders
(5) 1 x White Block Squeegee
(6) 1 x 100% wool squeegee
(7) 1 x conqueror squeegee
(8) 1 x metal scraper
(9) 1 x half-moon shape squeegee with felt
(10) 1 x SNITTY film cutter
(11) 1 x yellow contour squeegee
(12) 1 x metal utility knife
(13) 1 x yellow long dead corner squeegee
(14) 2 x Pink Lil Chizler Scraper
(15) 1 x pair of gloves
(16) 1 x Heat Gun with 1pc Large Deflector Nozzle(8cm), 1pc Reduction Nozzle(2cm)
Heat Gun Technical Parameter
Power voltage: AC110V
Power Consumption: 1800W
Air Flow Approx.: 250/550 L/min
Temperature at nozzle outlet approx.: 60-650 C
Temperature measuring accuracy at nozzle outlet: +/- 10%, on the display: +/- 5
Display operating temperature: 0---+50
Weight (Body no accessories): 0.8 kg
Heat Gun use for:
1. Remove paint
2. Peel old wallpaper
3. Remove plastic floor title
4. Bend PVC pipe
5. Melt litter in pipe
6. Remove greasy litter
7. Heat shrinkage pipe contraction
8. Car sticker install or remove
4. VViViD Dark Black Headlight Taillight Tint Air-Release Vinyl Wrap Film Roll (1.49ft x 60")
Feature
VVIVID Air-Tints are an industry first: a headlight/taillight tint with all of the technologies developed in VVIVID+ premium materials. They include an air-release membrane which allows you to install the tint dry ( without installation liquid ) Ready to use out of the box!This is the only film on the market that can wrap ANY SHAPE. It is super conformable with heat. It was originally manufactured for hard-to-wrap surfaces, but the ease of install has professionals saving time on any headlight shape.
This film is also self healing and scratches will go away with heat! Simply cut the vinyl to shape, and apply it to the surface. To make the vinyl conform to curves, simply heat with a heat gun or hair dryer, stretch and apply. Lastly, using a sharp blade, trim away excess from the headlight and you're done! its literally that simple!
Made with automotive grade cast vinyl, these tints are 80% tinted smoke or 20% VLT. The adhesive is acrylic based which will not eat through plastic like other tints on the market. It is 100% chemical safe, and will not eat through headlight coatings or damage your lights.
NOTE: MAKE SURE TO MEASURE YOUR HEADLIGHT TINTS - THIS PRE-CUT SHEET IS 1.49ft x 60"
Description
WARNING: These films are made for headlights and tailights that would normally be impossible to wrap. These tints have air release and are applied with heat to conform to desired shape. It may leave a subtle orange peel that is not normally visible from a short distance. All headlight tints come with a subtle natural air release pattern and can be installed using either dry or wet application methods. These tint films are the first of their kind and are designed to conform to any difficult surface that would otherwise be impossible with standard headlight tints. This film is also self healing and scratches will go away with heat! USE: Simply cut vinyl to shape, apply it to surface. To make vinyl conform to shape, simply heat with a heat gun or hair dryer, stretch and apply. Lastly, using a sharp blade, trim away excess from the headlight and you're done! its literally that simple!5. 12 by 48 inches Matte Black Out Smoke Tail Lights or Headlights Tint Vinyl Film
Feature
1 piece 12 by 48 inchesColor: Matte Black, 25% Dark
Self-adhesive, peel and stick
Perfect for tail lights, side marker lights, reflectors and head lamps
Stretchable with heat and water resistant
Description
This page features one piece brand new universal fit self-adhesive matte black-out smoke tail light vinyl film sheet.
The level of this black-out effect is 25% dark smoke.
The size is 12" x 48" (1ft x 4ft), the sheet thickness is about 0.001 inches.
when you order:
Quantity 1: 12" x 48"
Quantity 2: 2 pieces 12" x 48" and so on
You can use this matte black-out vinyl sheet for headlights, tail lights, side marker lights or even top part of the windshield, etc.
Simply apply this high quality black-out vinyl sheet to anything smooth surface and cut off the edge. It will not damage your lamp nor leave any residual later when you remove this.
We recommend you to check the dimensions of the lamp to determine how many square feet you'll need before buying and you can use heat gun or hair dryer to apply this film.
6. VViViD Air-Tint Dark Black Headlight/Tail Light Window Tint (17.9" x 60" large roll)
Feature
VVIVID Air-Tints are an industry first: a headlight/taillight tint with all of the technologies developed in VVIVID+ premium materials. They include an air-release membrane which allows you to install the tint dry ( without installation liquid ) Ready to use out of the box!This is the only film on the market that can wrap ANY SHAPE. It is super conformable with heat. It was originally manufactured for hard-to-wrap surfaces, but the ease of install has professionals saving time on any headlight shape.
This film is also self healing and scratches will go away with heat! Simply cut the vinyl to shape, and apply it to the surface. To make the vinyl conform to curves, simply heat with a heat gun or hair dryer, stretch and apply. Lastly, using a sharp blade, trim away excess from the headlight and you're done! its literally that simple!
Made with automotive grade cast vinyl, these tints are 80% tinted smoke or 20% VLT. The adhesive is acrylic based which will not eat through plastic like other tints on the market. It is 100% chemical safe, and will not eat through headlight coatings or damage your lights.
NOTE: MAKE SURE TO MEASURE YOUR HEADLIGHT TINTS - THIS PRE-CUT SHEET IS 17.9" x 60"
Description
All headlight tints come with a subtle natural air release pattern and can be installed using either dry or wet application methods. These tint films are the first of their kind and are designed to conform to any difficult surface that would otherwise be impossible with standard headlight tints. This film is also self healing and scratches will go away with heat! USE: Simply cut vinyl to shape, apply it to surface. To make vinyl conform to shape, simply heat with a heat gun or hair dryer, stretch and apply. Lastly, using a sharp blade, trim away excess from the headlight and you're done! its literally that simple!7. Headlights, Tail Lights, Fog Lights Tint Vinyl Film, Self Adhesive (Small 12''X48'', JDM Golden Yellow)
Feature
Stretchable with heat and water resistantSelf-adhesive, peel and stick
Easily cleansed with water and easy to remove without residual
Color: BLACK
Size: 12''X48''
Description
Why is headlight protection so valuable ? It has been estimated that on average 1 out of every 6 automobiles will require headlight replacement due to damage from road debris. Replacing headlight components can be an expensive and time consuming process, the average headlamp set costs $450 to replace. Plastic headlights tend to dull and lose their transparency, glass headlights tend to break and fracture as they wear. what tools do I need for install headlight tint? Vinyl Squeegee (Credit Card /w cloth wrap will work) Soft Cloth Towel Spray Bottle with soapy water Hair Dryer or a Heat Gun How to Install Headlight and Tail Light Tint film? 1. Clean the surface of the Headlight or Tail light with soap and water to ensure all debris are removed from the surface of the Tail Light. 2. Carefully remove the Overlay from the sheet and spray the overlay's adhesive side with Soap and Water. The Soap and Water will prevent the Overlay's adhesive from sticking while you apply it the Tail Light. 3. Carefully apply/align the Overlay on the Tail Light and smooth out as much crease as possible by using your fingers. Use the vinyl squeegee to push out all the soapy water on the front face of the Tail Light. The more soapy water you push out the less bubbling there will be. Note: Make sure the crease are evenly distributed on the Overlay, therefore you can easily smooth it out with a heat Gun and Squeegee. 4. Carefully pull and fold the side inward. If necessary, use the hair dryer to soften up the vinyl and squeegee out all the crease. 5. Heat up the excess vinyl (heating up the vinyl will soften it and makes it easy to trim) and trim. Note: Don't worry if you over stretch the vinyl. Any excess vinyl protruding can be easily removed using a brand new exacto knife.8. Steinel HB 1750 - Powerful turbine blower with air delivery rate up to 23 cfm, All Color coded keys for the right temperature every time, Maintenance free factory sealed motor, Lightweight, Heat Gun with well balanced design Soft Grip Handle and convenient slide switch , Power Tool includes a Plug-In heating element, 34750
Feature
This Hot Air Tool has a temperature range of 200 - 1200F, with an air delivery rate up to 23 cfmThe HB 1750 has been specifically optimized for efficiency drying and for heat-shrinking tubes and sleeves on thick cables
Plug-in heating element takes only seconds to change and available accessories enhance versatility
1750 W Hand Tool with quick-lock stand is fully adjustable and stores all keys
Ideal for shrink wrapping, activating adhesives, softening compounds, window tinting and bending plastics
Description
The Steinel 34750 HB 1750 heat blower emits airstreams up to 23 cubic feet per minute (CFM) at temperatures ranging from 200 to 1,200 degrees F. Similar in shape to a hair dryer, the blower is lightweight and balanced to reduce fatigue, and has a plug-in heating element that can be easily changed in the field. The adjustable stand allows the blower to be locked at any angle for stationary use. It comes with five color-coded keys that lock the output to different temperature ranges, and has a baffle control to adjust the airflow and output temperature within the selected range. There is also a cool air setting (room temperature) for drying paint or cooling work pieces. This heat blower is suitable for many applications from drying paint and shaping plastic to removing decals and touching up shrink wrap.
Specifications
| Heating Element | Field changeable, plug-in |
| Weight | 2.9 lb. |
| Dimensions | 9.5 x 10.8 x 5.8 inches (H x W x D). (H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.) |
| Variable Airflow | Up to 23 CFM |
| Variable Temperature | Selectable with color-coded keys from 200F to 1,200F (94C to 649C) |
| Power Cord | Double insulated, industrial grade rubber, length: 6 ft. |
| Output | 1,750 watts |
| Voltage | 120 VAC / 60 Hz at 14.6 amps |
| Certifications | UL / C-UL listed |
| Warranty | One year limited |
| Nozzle Diameter | 1.70 inches (43.50 mm) |
| Switch | Cool air stage (room temperature) Hot stage (selectable with keys) |
Heat guns and heat blowers are hand tools that emit a stream of heated air at variable temperatures up to 1,300 degrees F (700 C). Most guns have an electrical heating element to control output temperatures and adjustable fan motors to regulate and focus airflow. Heat guns with high airflow output (greater than approximately 20 cubic feet per minute) are sometimes called heat blowers. Heat guns can be used for a variety of applications ranging from copper and plastic welding to touching up shrink wrap. Accessory nozzles (sold separately) are used to shape the air stream over a wider area, or direct it around pipes and tubing for even heating which prevents adjoining surfaces (such as panes of glass) from overheating, and some heat gun models incorporate workbench stands to allow hands-free operation.
Steinel manufactures heat guns, glue guns, gas torches, and sensors. The company, founded in Germany in 1959, meets International Organization for Standardization (ISO) 9001:2008 standards and is Restriction of Hazardous Substances (RoHS) compliant.
Whats in the Box?
- HB 1750 heat blower
- Quick-lock stand
- Blue key (200 to 300 degrees F)
- Grey key (300 to 500 degrees F)
- Yellow key (500 to 750 degrees F)
- Orange key (750 to 1,000 degrees F)
- Red key (1,000 to 1,200 degrees F)
9. Titan Tools 51886 Propane Heat Gun
Feature
For use with various applications such as vinyl wrapping, window tinting, heat shrink tubing, paint removal, thawing frozen pipes, bending plastics and moreTemperature range: 842 - 1022 degree F (450 - 550 degree C)
Connects to disposable propane cylinders - propane cylinder not included
Hands free vertical stand
Includes spreader nozzle and deflector nozzle
Description
Titan Tools 51886 propane heat Gun is perfect for use with vinyl wrapping, window tinting, wiring and paint removal projects. Its high temperature range makes it a great tool for thawing frozen pipes and bending plastics. The heat Gun connects to disposable propane cylinders that are widely available. In addition to the heat Gun itself, this offer includes a hands free vertical stand, a spreader nozzle and a deflector nozzle. This product does not include a propane cylinder.10. Steinel HL 2020 E Automotive Kit - incl. hot air gun with LCD-Display & variable temperature, heat tool set for repairing and welding tarpaulins, window tinting, auto body welding
Feature
This heat gun kit for car mechanics includes the new hl 2020 e professional hot air gun with powerful 1,600 watts, a 13.3 amp motor and 20 percent higher durability than its predecessorWith double insulation, lcd-display, heat build-up warning, residual heat indicator and built-in overload protection and for convenient and secure handling
The heating element's temperature is easily adjustable by toggle in 10 f steps from 120 - 1150 f, while airflow control allows for three settings (4 cfm, 4-8 cfm, 6-13 cfm)
The hl 2020 e is the ideal tool for professionals in the automotive industry helping with any plastic and auto body welding purposes
Includes 14 mm/39 mm reflector nozzles, 9 mm reduction nozzle, 75 mm window nozzle, welding nozzle, pp plastic welding rods, auto body welding dvd, catalog, heavy duty carrying case
Description
The Steinel HL 2020 E automotive Kit includes the new HL 2020 E professional heat gun. The electronically controlled heat tool delivering 1,600 Watts of power is easily operated via Joystick, to regulate the temperature between 120 to 1,150f, and provides convenient handling with its LCD display. Thanks to the light, ergonomic design, the tool is perfectly balanced, which allows for fatigue free one handed operation. The residual heat indicator warns the user that the Outlet nozzle is still hot and the thermal cut-out prevents overheating, ensuring safety while working. The HL 2020 E hot air gun comes with double insulation, an easily replaceable 6ft industrial rubber power cord, an integrated support stand that allows it to sit upright for hands free use and with a built in hanging ring for easy storage. Including 14 and 39 mm reflector nozzles, a 9 mm reduction nozzle, a 75mm window nozzle, a welding nozzle, PP plastic welding Rods and an auto body welding DVD, the HL 2020 E set is especially suited for car Mechanics and tasks such as welding plastics or dismantling and repairing vehicle frames. Fits all 1.34 inch diameter industry standard nozzles. The heat gun and accessories come in a heavy duty carrying case for safe transport and storage.11. New DRILL MASTER 1500 Watt Dual Temperature Heat Gun 572 Fahrenheit low, and 1112 F