Finding your suitable volt meter tester is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best volt meter tester including detail information and customer reviews. Let’s find out which is your favorite one.
Reviews
1. Eventek Digital Multimeter, ET380 Electronic Amp Volt Ohm Voltage Meter Multimeter with Diode and Continuity Test Tester With Backlight
Feature
Digital multimeter - ET380 multimeter can measure AC/DC voltage, DC current, resistance, continuity, diode and etcSafe & reliable design - Overload Protection on all ranges, Low Battery Voltage Indication, and Double Insulation
Specification:DC Voltage:200mV- 500V, AC Voltage:200V-500V, DC Current:200uA- 10A, Resistance:200- 2000K
Large LCD back light display: Data hold and large digital display with backlit LCD for visibility in dimly light areas
What you get - 1x Eventek ET380 Digital Multimeter, 1 x Operator's Manual, 2 x Test Leads, 1 x 9V Battery, 1-Year Warranty
Description
Technical Specifications:DC voltage: 200mV/ 2000mV/ 20V/ 200V/ 500V (1% 10)
AC voltage: 200V / 500V (2.0% 10)
DC current: 200uA / 2000uA / 20mA / 200mA / 10A (2.0% 5)
Resistance: 200 / 2000 / 20K / 200K / 2000K (2.0% 5)
Diode and on-off test: buzzer (when turn on resistance less than 70 30, the buzzer of machine will alarming)
Diode (display approximate diode positive voltage data)
Square wave output: the output of frequency 50Hz 10%, Vp-p 3V, the output of impedance 560K
Note:
Max Voltage between input terminal and Earth Ground: CAT II 600V
To avoid risk of electric shock, do not use the meters before the cover is in place.
The range switch should be at right position for the testing.
To avoid electric shock and damaging the instruments, the input signals are forbidden to exceed the specified limits.
When measuring TV set or switched power, attention should be paid to the possible pulses that may bring destruction to the circuit.
Range switch position is forbidden to be changed at random during measurement.
Take caution against shock in the course of measuring voltage higher than DC 60V & AC 30V.
Protection fuse should be replaced only with same type and same specification.
Operating Temperature: 0~40 (32~104)
Storage Temp.: -10~50 (relative humidity <85%)
Guaranteed precision Temp.: 235 (relative humidity <85%)
Power Supply: 9V Battery x 1pc
Dimension: 115 x 65 x 30 mm/0.38 x 0.21 x 0.1 in (L x W x H)
Weight: approx: 170 g/0.37 lb (including battery)
Packing List:
1X Digital Multimeter
2 X Test Leaders
1 X Operator's Manual
1 X Built-in battery ( 9V )
2. Klein Tools 69149 Electrical Test Kit
Feature
The MM300 multimeter measures AC/DC voltage, DC current and resistance and has a safety rating of CAT III 600V, Class 2, Double insulationThe NCVT-1 has a bright green LED to indicate the tester is working; it changes to red and warning tones sound when voltage is detected
NCVT-1 has a digitally-controlled ON/OFF power button and auto power-off feature to conserve and extend battery life
Receptacle tester detects wiring configurations and indicates correct wiring, open ground, open hot, open neutral, hot/ground reversed
Includes visual and audible continuity indicators up to 25 omega
Description
Klein Tools updated electrical test kit contains MM300 (manual-ranging digital multimeter), ncvt-1 (non-contact voltage tester) and the RT105 (receptacle tester). the ncvt-1 automatically detects standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, outlets, and wires. The RT105 detects the most common wiring problems in standard receptacles.3. Etekcity MSR-C600 Digital Clamp Meter Multimeters, Auto-Ranging Multimeter AC/DC voltmeter with Voltage, AC Current, Amp, Volt, Ohm, Diode and Resistance Test Tester
Feature
Autoranging clamp multimeter with AC current, AC/DC voltage, resistance, diode and continuity testJaw opening measures AC current in a conductor up to 26mm without interrupting the circuit
Features Data Hold, Max Reading and an easy-to-read large LCD
Comes with a handy carrying pouch - Perfect for use while on the go
Automatically enters sleep mode after 15 minutes of inactivity for energy conservation; 1-Year Warranty
Description
Etekcity's Digital Clamp Multimeter makes household electricity maintenance safe and simple. While having the capability to test AC/DC voltage, resistance, continuity and diodes, the built-in clamp enables you to measure AC current without needing to break circuits to come into direct hazardous contact. With a capacity of 400amps, the clip can comfortably extend to test cords and wires up to 28 mm in diameter. The multimeter also includes safely insulated test probes with plastic gripping for safer handling while measuring. and easier. This device is the perfect startup multimeter for entry-level electricians, hobbyists, and general household uses.Specifications
Safety/Compliances: IEC61010 CAT.II 600V, CAT.III 300V over voltage and double insulation
Display: Maximum display 1999
Range selection: Auto ranging
Overload display: Display OL or OL
Measurement Speed: Updates 3 times/second
Max.Jaw Opening: 28mm diameter
Tested Max. Current Conductor Size: 26mm diameter
Diode test: Yes
Continuity test: Yes
Battery Life: about 150hours (alkaline battery)
AC Current:
-Range and Accuracy: 2A{<1A, (4%+40); 1A, (3%+30)}, 20A{4A, (3%+12), >4A, (2%+8)}, 200/400A (1.5%+5)
- Overload Protection: 400A rms
AC Voltage:
- Range and Accuracy: 2/20/200V (1.2%+5), 600V (1.5%+5)
- Input Impedance: 10 M<100pF
- Overload Protection: 600V rms
DC Voltage:
- Range and Accuracy: 200mV (0.8%+3); 2/20/200V (0.8%+1); 600V (1%+3)
- Input Impedance: 10 M
- Overload Protection: 600V rms
Resistance:
- Range and Accuracy: 200 (1.2%+2); 2/20/200K (1%+2); 2M (1.2%+2), 20M (1.5%+2)
- Input Impedance: 10 M
- Overload Protection: 600Vp
Package Includes
1 x Etekcity Digital Clamp Meter
2 x Test Leads (a pair)
2 x AAA 1.5V batteries (installed)
1 x Carrying Bag
1 x User Manual
4. Crenova 6016A Clamp Meter 600A Multimeter Auto-Ranging Ohm Volt Amp Diode Continuity Temperature Measurements, Professional AC Current Multi Meter Tester, Large LCD Display
Feature
Versatile Applications Crenova 6016A Clamp Meter performs well in AC/DC voltage, AC current, resistance, continuity, diode and temperature measuring. AC current measurement with current ranges is up to 600A.Wide-rangingWide ranging jaw opening measures AC current in a conductor up to 30mm without interrupting the circuit.
User-friendlyEquipped with a large LCD screen, Data Hold and Maximum Value Hold, it's very easy and convenient to use.
Energy-efficientTo save energy, it will auto shut down after 15 minutes if the multimeter is not in use. There is also an indication when battery is low.
Safe and ReliableCrenova 6016A Clamp Meter conforms to IEC61010-1, IEC1010-2-032 and CAT III 300V, ensuring double insulation and overvoltage protection.
Description
Combined with a 3 1/2 LCD display of 16mm text height and built-in data hold function, Crenova 6016A Auto-Ranging Clamp Meter provides high precise and extremely clear measurements of AC/DC voltage, AC current, resistance, temperature, diode, continuity etc. It is great for family, school, laboratory and factory use due to its extraordinary performances.
Technical Specifications:
- DC Voltage:
*200mV/2V/20V/200V/600V (0.5%+4d)
- AC Voltage:
*200mV/2V/20V//200V/600V (0.8%+10d)
- AC Current:
*2A/20A/200A/600A (3.0%+10d)
- Resistance:
*200 (0.8%+5d)
*2k/20k/200k/2M (0.8%+4d)
*20M(1.2%+10d)
- Temperature Range and Accuracy:
-20-700-4~1292(1.0%+5)
- Diode Test: Yes
- Data Hold: Yes
- Low Battery Indication: Yes
- Auto Power-off: Yes
Please install the battery before using:
Step 1: Remove the back cover screw
Step 2: Open the back cover and install the two 1.5V AAA batteries
Warranty:
Crenova 6016A comes with 1-year free replacement and refund warranty. Dedicated customer service team is on standby for 24 hours.
Package Includes:
1 x 6016A Clamp meter Multimeter
1 x Pair Test Leads
1 x TP01 Temperature Probe
2 x 1.5V AAA Batteries
1 x User's Manual
5. Digital Multimeter, Crenova MS8233D Auto-Ranging Digital Multimeters Electronic Measuring Instrument AC Voltage Detector Portable Amp / Ohm / Volt Test Meter Multi Tester Diode and Continuity Test Scanners Home Use Electronic DIY Hand Tools with Backlight LCD Display
Feature
Multi FunctionsDigital Multimeter can measure AC/DC voltage, AC/DC current, resistance, frequency, continuity, diode and etc.Over Load Protection Use the PTC protection circuit for Resistance, and frequency measurement.
Large LCD DisplayThis unit is designed with 3 1/2 digit LCD display which makes the reading clear.
Special FeaturesMeasuring Instrument with function of Data Hold, Maximum Value Hold, Backlight, Function Switching.
Auto Power OFF If the meter is idle for 15 minutes (idle time), the meter will automatically turn off. After auto power-off, pushing any of the push button or changing the rotary switch can turn on the meter again. (Note: it needs install a new battery before using; there maybe a little color difference)
Description
Crenova MS8233D Multimeter is an Auto-Ranging Digital Multimeter *The Digital Multimeter, as general measurement tool, is widely used in the school, laboratory, factory and other social field. *The equipment is used for measurement in building facilities. For examples, distribution boards, circuit breaker and industrial equipment located in fixed facilities, as a fixed motor. Crenova MS8233D Multimeter is very easy to use *The convenient auto-ranging operation allows you to select the right measurement range when working on a variety of components, from small electronics to main electrical sources. *Very easy to read labels and screen makes it easy to select desired tests and the results. Technical Specifications: 1.DC Voltage: *200mV/2V/20V/200V (0.5%+2) *600V (0.8%+2) 2.AC Voltage: *2V/20V/200V (0.9%+3) *600V (1.2%+3) 3.DC Current: *200A/2000A/20mA/200mA/10A (1.5%+3) 4.AC Current: *200A/2000A/20mA/200mA/10A (1.5%+4) 5.Resistance: *200/2k/20k/200k (0.8%+2) *2M/20M (1.0%+2) 6.Frequency: *20kHz (1.5%+5) 7.Power Supply: 9V Battery (6F22 or 1604A Type) 8.Safety Class: IEC 61010-1, CAT II 600V. Safe and Reliable *Over Load Protection: Use the PTC protection circuit for Resistance, and frequency measurement. *Auto Power OFF: If the meter is idle for 15 minutes (idle time), the meter will automatically turn off. Warning Tips: 1.Please install a new battery before using Step One: Remove the back cover screw Step Two: Open the back cover and install the 9V battery 2.Please read relevant information carefully and observe all the warnings and notes strictly. The meter can be cleaned with soft clean cloth to remove any oil, grease or grim. Do not use liquid solvent or detergent.6. Non-Contact Voltage Tester AIDBUCKS PM8908C Electrical Voltage Detector Pen 12-1000V AC Inductive Electric Tester Kit High-Precision Sensor Test Pencil Line Detection for Home Electrician Laboratory
Feature
Accurately Multi-ranging measurement: Accurately detects AC voltage ranging from 12V to 1000V, and distinguish them into 3 voltage levels(low, moderate,high),widely applicable for hobbyists, beginners, and home users.Non-contact AC voltage measurement : It will flash and beep when the device close to AC voltage greater than or equal to 12V, Don't need to touch the measured object. It will also have a beep sound. it's tell you this is a safe voltage range. Safely for your family and work.
Safety guarantee with sound and light alarm: Live/Null wire distinguish at close range. It will flash and beep when the device close to AC voltage greater than or equal to 12V. No need to touch.
Portable and convenient with Auto Power Off: Lightweight, durable polycarbonate plastic resin construction with convenient pocket clip. Auto power-off feature conserves energy while the LED torch allows operation even on dark corners.
Customer satisfaction guarantee : CE CAT.III600V RoHS Safety Rating. AIBUCKS is dedicated to 100% customer satisfaction,our friendly customer service team is always ready to help with all questions or issues. In the package, you will get non-contact Voltage Tester, 2 x 1.5V AAA Batteries, English User's Manual, 24 Months Warranty.
Description
Our suppliers have 16 years of experience in the development and design Production of meters,focusing on the production of high-quality and Safe products.
1. Wide Testing Range. All electric appliances in your family can be tested by it, such as circuit
breakers, lighting fixtures, switches, outlets, wires and anywhere you need it .
2.100% Safe. Test in a non-contact way, so do not worry about being shocked by the electricity.
3. Safety Warning. As long as voltage is detected, there will be LED flashes and buzzer.
4. Easy to use and carry.
Note
1.This function is designed for voltage detection in the weak electric field.
2. Please have a check whether the LED in the power button is lighted before you
use it, in order to make sure the tester is operational.
Specifications:
Operating Voltage: 12--1000V AC
Frequency: 50--60Hz
Alarm Mode: Sound and light
NCV Sensitivity: Three levels (low, medium, high)
NCV Empfindlichkeit: Automatisch
Working temperature: 0 ~ 40
Storage temperature: -10 ~ 50
Working height (altitude): <2000 m
Flash Light: White
Auto Power Off: 3 min
Low battery indication: <2.6V
Beep
LED flashlight
General Specifications:
Weight: 45g
Size:15.6*2*2 cm
Battery: 2 x 1.5V AAA battery
Texture of Material: ABS + PVC
Authentication: CE CAT.III 1000V /CAT.IV 600V
Package Contents:
1 *PM8908C Voltage Tester
2*1.5V AAA batteries
1 * English manual
7. Gardner Bender GMT-318 Analog Multimeter, 6 Function, 14 Range, AC / DC Volt
Feature
Manual range selectionEasy to read, color-coded analog displays
Includes replaceable test leads and operating instructions
Agency approved with fuse overload protection circuitry incorporated
15 position rotary dial
Description
This multifunctional analog multimeter was designed for the homeowner, hobbyist, or professional needing to make electrical and electronic equipment measurements. Capable of measuring 6 functions on 14 ranges on it's easy-to-read color-coded analog display you'll find yourself reaching for this handy unit almost every time. Unit tests AC and DC voltage, DC Current of Resistance, and common household batteries from 1.5V thru 9V. Unit includes built-in Zero Ohms adjustment dial allowing you to reset prior to resistance testing and to perform internal battery test function. Unit incorporates fuse overload protection circuitry to protect the user and a mirror scale is provided to reduce the possibility of parallax errors. Common measurements with this unit include: testing household batteries for charge level, troubleshooting various low voltage circuits, testing wall receptacles for proper voltage and grounding, and troubleshooting electrical cords, strings of lights, fuses, and switches to determine if they are operating properly or if a break in the circuit exists and the item in question needs to be repaired or replaced. The decibel feature of this multimeter is used for transistor gain measurement in electronic circuits and should not be confused with audio decibels. If you are looking for an all-around electrical tester you've found an excellent choice.8. AstroAI Digital Clamp Meter, TRMS 6000 Counts Multimeter Volt Meter with Manual and Auto Ranging; Measures Voltage Tester, Current, Resistance, Continuity, Frequency; Tests Diodes, Temperature
Feature
TEST A WIDE RANGE of measurements including Voltage, AC Current, Resistance, Continuity, Capacitance, Frequency, and Temperature, Tests DiodesPROFESSIONAL LEVEL features includes True RMS for accurate AC Current and Voltage readings. Also includes Auto-Ranging for faster and more accurate results
CONVENIENT FEATURES included Data Hold and a Large, LCD Backlit Screen, and Extra Large Clamp
IDEAL FOR COMMERCIAL settings where it can handle the demands of a long workday, from the durable exterior to the wide range of heavy-duty capabilities
3 Year Warranty provided by AstroAI
Description
The AstroAI True RMS Clamp Meter is designed to be safely and accurately used by professionals in a commercial setting or weekend DIYer's that need a little more power utility from their standard digital multimeter. It's easy and safe to operate with advanced features built for measuring seemingly everything. Run tests on diodes and transistors while being able to measure voltage, current, resistance, continuity, capacitance, and frequency, all on one device. This Clamp Meter is designed to be used in commercial settings, but can also be brought home to use with automotive or household electrical problems.Specifications
Temperature Test: Yes
Transistor Test: Yes
Diode Test: Yes
Continuity Test: Yes
External Current Test: Yes
Capacitance: Yes
Frequency: Yes