Finding your suitable ftdi cable 5v is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best ftdi cable 5v including detail information and customer reviews. Let’s find out which is your favorite one.
![Adafruit FTDI Serial TTL-232 USB Cable [ADA70]](https://images-na.ssl-images-amazon.com/images/I/4151vTNGqPL.jpg)
Reviews
1. FTDI Cable 5V
Feature
USB to Serial (TTL level) converterDescription
Description: The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this FTDI cable are configured to operate at 5V.
The FTDI cable is designed around an FT232RQ, which is housed in a USB A connector. The other side of the cable is terminated with a 0.1" pitch, 6-pin connector with the following pinout: RTS, RX, TX, 5V, CTS, GND (RTS is the green cable and GND is black).
This cable has the same pinout and functionality as our FTDI Basic Breakout board; you can use it to program your Arduino Pro, Pro Mini and Lilypad. For use with those boards, align the black and green wires of the FTDI cable with the 'BLK' and 'GRN' labels on the PCB.
There are pros and cons to the FTDI Cable vs the FTDI Basic. The FTDI Basic has great LED indicators, but requires a Mini-B cable. The FTDI Cable is well protected against the elements, but is large and cannot be embedded into a project as easily. The FTDI Basic uses DTR to cause a hardware reset where the FTDI cable uses the RTS signal.
2. EZSync FTDI chip usb to 5v TTL UART serial cable, connector end, 1.5m, TTL-232R-5V compatible, EZsync008
Feature
USB to UART cable with 5V TTL level UART signals. 6 output wires terminated by a 6 way, 0.1", Single-In-Line (SIL) connector6 way outputs provide Tx, Rx, RTS#, CTS#, VCC and GND. Data transfer rates from 300 baud to 3 Mbaud at TTL levels
Connect directly to a microcontroller UART or I/O pins. 5V TTL output allows external logic to be powered from the USB port
Replace MAX232 type level shifters allowing for direct connection of products to PC via USB
Overmolded FT232R chipset provides single chip USB to asynchronous serial data transfer interface. Works with all Windows and Mac OS versions.
Description
Every EZSync cable is built to last for years with high quality industrial grade materials. The cable works with all Windows and Mac OS versions including the latest Windows 10 and Mac OS X 10.10(Yosemite) and 10.11(EI Capitan). This cable has 6 outputs: GND(Black), CTS#(Brown), VCC(RED), TXD(Orange),RXD(Yellow), RTS#(Green). This cable can be used for a variety of applications: upgrading Legacy Peripherals to USB; interface Microcontroller UART or I/O to USB; interface FPGA / PLD to USB; USB Instrumentation PC interface; USB Industrial Control; USB Software / Hardware Encryption Dongles.3. Adafruit FTDI Serial TTL-232 USB Cable [ADA70]
Feature
FTDI cableTranslucent body with RX/TX LEDs
Power line provides 5V
Data signals are at 3V
Works with 5V boards with minor tweaking
Description
Just about all electronics use TTL serial for debugging, bootloading, programming, serial output, etc. But it's rare for a computer to have a serial port anymore. This is a USB to TTL serial cable, with a FTDI FT232RL usb/serial chip embedded in the head. It has a 6-pin socket at the end with 5V power and ground, as well as RX, TX, RTS and CTS at 3V logic levels. These are perfect for use with a Boarduino, Meggy's, or other Arduino clones and derivatives, and Fuzeboxen. Useful whenever you want to communicate with a TTL serial device, such as an XBee.New! We now have a version with a translucent body and RX/TX LEDs! Now it's easier than ever to debug your setup or see data transfer, the red and green LEDs will blink when data is transmitted/received by the FTDI chip. The version we have is the 3.3V. The data signals are at 3V and the power line provides 5V. We suggest this for any product that needs FTDI cables. Because the cable is 5V-logic compliant, you can use it with 3v or 5v logic just fine - no level shifting required!.
If you have a device that is running at 5V logic and requires 5V power, this cable will work fine. If you want to tweak the voltages and signals a little, you should also check out the FTDI friend
This cable is fully compatible with the TTL-232 cable from FTDI. You can download the drivers and the diagram / spec sheet which has mechanical cable details. For more details about the FT232RL itself, check out that datasheet here.
Note: These use genuine FTDI chips, either we purchase them or they are manufactured to our specifications with the requirement of genuine FTDI chips 10/22/14
4. FTDI Cable 5V VCC-3.3V I/O
Feature
5V VCC, and 3.3V I/ODescription
Description: The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB. The VCC pins of this FTDI cable are configured to operate at 5V with 3.3V I/O.
The FTDI cable is designed around an FT232RQ, which is housed in a USB A connector. The other side of the cable is terminated with a 0.1" pitch, 6-pin connector with the following pinout: RTS, RX, TX, 5V, CTS, GND (RTS is the green cable and GND is black).
This cable has almost the same pinout and functionality as our FTDI Basic Breakout board; you can use it to program your Arduino Pro, Pro Mini and Lilypad, etc. For use with those boards, align the black and green wires of the FTDI cable with the 'BLK' and 'GRN' labels on the PCB. The difference between this cable and the FTDI Basic Breakout is the cable has a 5V Vcc where as the breakout has a 3.3V Vcc. You will still be able to program an Aruidno Pro, Pro Mini, Lilypad, etc. The 5V Vcc supply will not damage these Arduino circuit boards.
These have 5V VCC, and 3.3V I/O. The 5V Vcc output shouldn't be a problem unless this cable is being used to power a sensitive circuit such as a sensor.
There are pros and cons to the FTDI Cable vs the FTDI Basic. The FTDI Basic has great LED indicators, but requires a Mini-B cable. The FTDI Cable is well protected against the elements, but is large and cannot be embedded into a project as easily. The FTDI Basic uses DTR to cause a hardware reset where the FTDI cable uses the RTS signal.
5. 6Pin FTDI FT232RL FT232 Module for Arduino USB to TTL UART Serial Wire Adapter RS232 Download Cable Module LED Indicator (5V VCC-5V I/O)
Feature
FTDI based USB to TTL Serial Cable are designed using the the standard FT232RL chipset.USB to UART cable with 5V TTL level UART signals. 6 output wires terminated by a 6 way, 0.1", Single-In-Line (SIL) connector6 way outputs provide Tx, Rx, RTS#, CTS#, VCC and GND. Data transfer rates from 300 baud to 3 Mbaud at TTL levels
Provides a fast, simple way to connect devices with a TTL level serial interface to USB. Support EEPROM, Vendor ID re-write, debrick Netgear routers and Mprog3.5; Support FTDI VCP driver and D2XX driver
Operating system Compatibility: Windows 10/8/7, Windows Vista, Windows XP, Windows 98, Windows ME, Linux and Mac OS. Please check for details in 'Product description' by scrolling down this page
1PCS*FTDI FT232RL USB to Serial adapter module USB TO TTL RS232 For Arduino Cable 6PinThe length of the cable is 6ft(1.8m) and UL 'E326510' certified
Description
FTDI based USB to TTL Serial Cable are designed using the the standard FT232RL chipset.The cables provide a fast, simple way to connect devices with a TTL level serial interface to USB.
The cables are available with a 6-way SIL, 0.1" connector TTL levels is 3.3V
The TTL-232R cables are a family of USB to TTL serial UART converter
cables incorporating FTD's FT232RQ USB to Serial UART interface IC device which handles all the USB signalling and protocols.
The cables provide a fast, simple way to connect devices with a TTL level serial interface to USB Each TTL-232R cable contains a small internal electronic circuit board, utilising the FT232R, which is encapsulated into the USB connector end of the cable. The other end of the cable comes with a selection of different connectors supporting various applications .
Cables are FCC, CE, RoHS compliant and are available at TTL levels 3.3V.
Cables are available with either a 6-way SIL,0.1"pitch connector, a 3.5mmAudio Jack, an 8 way, keyed 2mmpitch connector (intended for use with VMUSIC2 or VDRIVE2) or bare, tinned wire ended connections
The USB side of the cable is USB powered and USB 2.0 full speed compatible.
Each cable is1.0m long and supports a data transfer rate up to 3 Mbaud
Red wire: 5V
Black wire: GND
White wire: RXD
Green wire: TXD
Yellow wire: RTS
Blue wire: CTS
6. Green-utech FTDI chip usb to 5v TTL UART serial cable, connector end, 1.8m, TTL-232R-5V compatible
Feature
the shipment from China by epacket, the shipment time about 10-14 days from China to USAUSB to Serial (TTL level) converter
0.1" pitch, 6-pin connector with the following pinout: RTS, RX, TX, 5V, CTS, GND (RTS is the green cable and GND is black , Brown is CTS,RED is VCC/5V,Orange is TX, Yellow is RX)
Description
The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this FTDI cable are configured to operate at 5V. The FTDI cable is designed around an FT232RQ, which is housed in a USB A connector. The other side of the cable is terminated with a 0.1" pitch, 6-pin connector with the following pinout: RTS, RX, TX, 5V, CTS, GND This cable has the same pinout and functionality as our FTDI Basic Breakout board; you can use it to program your Arduino Pro, Pro Mini and Lilypad. For use with those boards, align the black and green wires of the FTDI cable with the 'BLK' and 'GRN' labels on the PCB. There are pros and cons to the FTDI Cable vs the FTDI Basic. The FTDI Basic has great LED indicators, but requires a Mini-B cable. The FTDI Cable is well protected against the elements, but is large and cannot be embedded into a project as easily. The FTDI Basic uses DTR to cause a hardware reset where the FTDI cable uses the RTS signal.7. Gearmo USB to 5v TTL Header Like FTDI TTL-232R-5V - Supports Windows 10
Feature
The Cable provides a USB to TTL Serial interface to 6-pin headerSingle board USB to asynchronous serial data transfer interface
Utilizes newest FTDI FT232QR chip, +5V output allows external logic to be powered from the USB port
Fully assisted hardware (RTS#/CTS#) or X-On / X-Off software handshaking
OS Compatibility:Windows 98, Me, XP, 2000, 2003, CE, Vista, Windows 7, 8, and 10 as well as Linux and Mac OS 10.X
Description
Introduction:
This USB to Serial UART (TTL level) adapter allows you to connect your computer through USB port and use it as a regular serial communication port. All USB protocol is handled within this adapter. There is no other device or programming required.
Product Details:
The adapter is perfect for embedded systems that require a serial connection to a computer. The board attaches directly to the USB bus via a standard type A receptacle connector. It shows up on any Windows computer as a standard serial COM port. Any applications that talk to this COM port is automatically convert to USB and back to UART to your target board.
Additional Features
- The Cable provides a USB to TTL Serial interface to 6-pin header.
- Single board USB to asynchronous serial data transfer interface
- Entire USB protocol handled by the electronics in the cable USB
- UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity
- Fully assisted hardware (RTS#/CTS#) or X-On / X-Off software handshaking.
- Data transfer rates from 300 baud to 3 Mbaud at TTL levels.
- +5V output allows external logic to be powered from the USB port
- Transmit and receive LEDs
- UHCI / OHCI / EHCI host controller compatible
- Low USB bandwidth consumption.
OS Support:
Windows 98, Me, XP, 2000, 2003, CE, Vista, Windows 7, 8, and 10
Linux and Mac OS 10.X
6-Pin Header Assignment:
- Pin 1 GND
- Pin 2 CTS
- Pin 3 VCC
- Pin 4 TXD
- Pin 5 RXD
- Pin 6 RTS
8. Micro USB FTDI Basic Breakout Module for Arduino 3.3V/5V
Feature
3.3V/5V adjustableDescription
The newest revision of our FTDI Basic with micro USB port, which use a 6-pin header on the bottom, smaller and more compact. Functionality has remained the same. This is a basic breakout board for the FTDI FT232RL USB to serial IC.The pinout of this board matches the FTDI cable to work with Arduino boards.
It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. This board will auto reset any Arduino board that has the reset pin brought out to a 6-pin connector.
The pins labeled BLK and GRN correspond to the colored wires on the FTDI cable. The black wire on the FTDI cable is GND, green is CTS. Use these BLK and GRN pins to align the FTDI basic board with your Arduino target.
This board has TX and RX LEDs that make it a bit better to use over the FTDI cable. You can actually see serial traffic on the LEDs to verify if the board is working.
This board was designed to decrease the cost of Arduino development and increase ease of use (the auto-reset feature rocks!).
9. SparkFun FTDI Basic Breakout - 5V
Feature
Now uses a SMD 6-pin header on the bottom, which makes it smaller and more compact.Description
Description: This is the newest revision of our FTDI Basic. We now use a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same.
This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. This board will auto reset any Arduino board that has the reset pin brought out to a 6-pin connector.
The pins labeled BLK and GRN correspond to the colored wires on the FTDI cable. The black wire on the FTDI cable is GND, green is CTS. Use these BLK and GRN pins to align the FTDI basic board with your Arduino target.
This board has TX and RX LEDs that make it a bit better to use over the FTDI cable. You can actually see serial traffic on the LEDs to verify if the board is working.
This board was designed to decrease the cost of Arduino development and increase ease of use (the auto-reset feature rocks!). Our Arduino Pro boards and LilyPads use this type of connector.
One of the nice features of this board is a jumper on the back of the board that allows the board to be configured to either 3.3V or 5V (both power output and IO level). This board ship default to 5V, but you can cut the default trace and add a solder jumper if you need to switch to 3.3V
10. EZSync FTDI chip usb to 5v TTL UART serial cable, wire end, 1.5m, TTL-232R-5V-WE compatible, EZsync009
Feature
USB to UART cable with +5V TTL level UART signals. Wire ended output allow most flexible connectionConnect directly to a microcontroller UART or I/O pins. +5V TTL output allows external logic to be powered from the USB port
Overmolded FT232R chipset provides single chip USB to asynchronous serial data transfer interface. Works with all Windows and Mac OS versions
6 outputs provide Tx, Rx, RTS#, CTS#, VCC and GND. Data transfer rates from 300 baud to 3 Mbaud at TTL levels
Replace MAX232 type level shifters allowing for direct connection of products to PC via USB