Related posts

Feature

The Cable provides a USB to TTL Serial interface to 6-pin header
Single board USB to asynchronous serial data transfer interface
Utilizes newest FTDI FT232QR chip, +5V output allows external logic to be powered from the USB port
Fully assisted hardware (RTS#/CTS#) or X-On / X-Off software handshaking
OS Compatibility:Windows 98, Me, XP, 2000, 2003, CE, Vista, Windows 7, 8, and 10 as well as Linux and Mac OS 10.X

Description

Introduction:
This USB to Serial UART (TTL level) adapter allows you to connect your computer through USB port and use it as a regular serial communication port. All USB protocol is handled within this adapter. There is no other device or programming required.

Product Details:
The adapter is perfect for embedded systems that require a serial connection to a computer. The board attaches directly to the USB bus via a standard type A receptacle connector. It shows up on any Windows computer as a standard serial COM port. Any applications that talk to this COM port is automatically convert to USB and back to UART to your target board.

Additional Features

• The Cable provides a USB to TTL Serial interface to 6-pin header.
• Single board USB to asynchronous serial data transfer interface
• Entire USB protocol handled by the electronics in the cable USB
• UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity
• Fully assisted hardware (RTS#/CTS#) or X-On / X-Off software handshaking.
• Data transfer rates from 300 baud to 3 Mbaud at TTL levels.
• +5V output allows external logic to be powered from the USB port
• Transmit and receive LEDs
• UHCI / OHCI / EHCI host controller compatible
• Low USB bandwidth consumption.

OS Support:
Windows 98, Me, XP, 2000, 2003, CE, Vista, Windows 7, 8, and 10
Linux and Mac OS 10.X

6-Pin Header Assignment:

• Pin 1 GND
• Pin 2 CTS
• Pin 3 VCC
• Pin 4 TXD
• Pin 5 RXD
• Pin 6 RTS