Finding the best traxxas rustler parts suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Reviews
1. RPM 80185 Rear A-Arms Blue E- Monster Jam, Rustler, Stampede
Feature
For use on the E-Rustler, Stampede, and Monster JamTech Note: These A-arms will not work on the nitro versions of the Rustler and Stampede
Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability
Backed by RPM's world-renowned breakage warranty
RPM is a proud American manufacturer designing and manufacturing 100% of our molded products right here in the United States
Description
Overview
RPM rear A-arms for the Traxxas Slash are designed specifically for the Slash - they are not multi-platform A-arms like the stock versions.
Our first design challenge was to beef up our version of the Slash rear A-arms to handle some serious abuse. The material around the inner and outer hinge pins has been increased by a whopping 64%! We then eliminated all of the unnecessary holes and shock mounts that would be needed on other vehicles but not on the Slash, which significantly reduced the weight of our A-arms while improving crash durability. Even after all of the increased muscle has been factored in, our A-arms still come in at over 10% lighter than the original arms! Our final design task was to improve the fit and finish and what we came up with will eliminate most of the slop in the rear suspension system! The Slash owner can tighten things up to near perfect out back simply by adding in a set of our #80382 Rear Bearing Carriers currently available. RPM Slash rear A-arms use stock suspension geometry and include stock rear toe angles.
RPM Slash rear A-arms are not only stronger and more durable than stock, they are also more rigid and less flexible too, making them the perfect addition to those race-level Slashes on the track. Additionally, the new geometry design leaves no place for dirt and rocks to get caught in the lower A-arm and reduces the chances of rocks and debris getting stuck between the axle and the arm.
RPM Slash rear A-arms are sold in pairs. They are molded in our nearly indestructible blend of nylons and are sold in either black our blue. These A-arms are backed by our limited lifetime warranty against breakage as well for confidence-inspiring durability and performance.
2. Traxxas 3631 Front Suspension Arms (pair)
Feature
Front suspension armsComes as a pair
Replaces worn or damaged parts
Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles
This product is made from high quality materials and designed for lasting performance
This is for use on RC vehicles such as the Traxxas Stampede and Rustler; consult your user's manual for exact parts listings
Description
This is the 3631 Suspension Arms Front (2) from Traxxas. Traxxas has grown to become the number-1 selling name in RTR nitro and electric models for the last 4 years running. No one has done more than Traxxas to advance the RTR category with innovative thinking and fun designs that make it easy for anyone to get started in the great R/C hobby. Traxxas, truly the fastest name in Radio Control.3. Traxxas 3632A Blue-Anodized 6061-T6 Aluminum Caster Blocks (pair)
Feature
Upgraded aluminum left and right 30-degree caster blocks provide improved performance and styleAnodized 6061-T6 aluminum provides improved strength and light weight
Quick and simple bolt-on installation
Includes suspension screw pin (2)
Fits electric RC vehicles such as the Traxxas Stampede, Rustler, and 2WD Slash; consult your user's manual for exact parts listings
Description
Traxxas #3632 aluminum caster blocks improve the appearance, ruggedness, and control on your Traxxas electric Rustler, 2WD Stampede or 2WD Slash. In addition to the strength and precision of the machined billet 6061-T6 aluminum, the red, blue, green or pink anodized caster blocks feature a high-contrast laser etched TRX logo. Simple bolt-on installation that anyone can perform inspires confidence for future upgrades. Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. This product is made from high quality materials and designed for long-lasting performance. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.4. Traxxas 1834 Body Clips, Set of 12
Feature
Fits most 1/8 and 1/10 scale vehiclesSecurely fastens bodies to mounting posts
Sold as a set of 12
Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles
This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings
Description
Traxxas #1834 standard size body clips fit most 1/10 and 1/8 scale vehicles to secure the body to the post. They may also be used in conjunction with #1815 body washers. They come as a package of 12. Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. This product is made from high quality materials and designed for long-lasting performance. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.5. Traxxas 2530 Front Bulkhead (black)
Feature
Front bulkheadBlack plastic
Replaces worn or damaged parts
Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles
This product is made from high quality materials and designed for lasting performance
This is for use on RC vehicles such as the Traxxas Rustler; consult your user's manual for exact parts listings
Description
This is the 2530 Front Bulkhead from Traxxas. Traxxas has grown to become the number-1 selling name in RTR nitro and electric models for the last 4 years running. No one has done more than Traxxas to advance the RTR category with innovative thinking and fun designs that make it easy for anyone to get started in the great R/C hobby. Traxxas, truly the fastest name in Radio Control.6. Traxxas Body Rustler (Clear) #3714
Feature
Replacement clear Rustler bodyBody comes pre-cut and requires painting
Window masking and decal sheet included
Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles
This product is made from high quality materials and designed for lasting performance
This is for use on RC vehicles such as the Traxxas Rustler VXL; consult your user's manual for exact parts listings
Description
This is the 3714 Body Rustler VXL from Traxxas. Traxxas has grown to become the number-1 selling name in RTR nitro and electric models for the last 4 years running. No one has done more than Traxxas to advance the RTR category with innovative thinking and fun designs that make it easy for anyone to get started in the great R/C hobby. Traxxas, truly the fastest name in Radio Control.7. Traxxas 3350R Velineon VXL-3s Brushless Power System
Feature
Kit contains VXL-3s waterproof ESC, Velineon 3500 4-pole motor, and speed control mounting plateESC features 3 drive profiles: Sport, Race, and Training Mode to limit throttle to 50% for inexperienced drivers
Integrated two-stage low-voltage detection for Lithium Polymer (LiPo) battery usage.Input Voltage: NiCad/NiMH 4-9 Cells (4.8 to 10.8 Volts DC); LiPo 2-3 Cells (7.4 to 11.1 Volts DC)
Ultra high-temperature sintered Neodymium magnets provide massive torque and linear power
Widest range of battery options ranging from 4-cell NiMH or NiCad packs all the way up to 3S LiPo battery packs (11.1 volt)
Description
The Traxxas 3350R is the perfect upgrade for your brushed Traxxas vehicle. The system installs easily in our Bandit, Stampede, Rustler, and Slash models. Use your stock battery or go with a more powerful 11.1V 3s LiPo battery to unlock the 60+mph potential of your vehicle with this brushless system powerhouse! The Velineon VXL-3s forward/reverse electronic speed control simplifies brushless technology with easy operation that gives you all the control you need for maximum fun. Quickly choose from 3 drive profiles in exactly the same manner as other Traxxas electronic speed controls (such as the XL-5). Profiles include: Sport, Race, and Training Mode (patented). Training Mode limits full-throttle power to 50% allowing young or new drivers to safely develop their control skills before unleashing the full-throttle capability of the Velineon system. High-frequency transistors and advanced circuit design deliver incredibly smooth and refined throttle control. High-current capacity (320 amps peak) and two-stage thermal protection frees you from motor limits. The companion Velineon 3500 Brushless Motor is precision-matched for use in the 1/10th scale vehicles, delivering the perfect balance of brutal horsepower and efficiency. The sensorless design works with the sophisticated circuitry in the VXL-3s Electronic Speed Control for smooth starts and precise control, without the need for additional sensors and wiring. Since there are no brushes or commutator to cause friction and wear, Velineon brushless power is always fast, run after run.8. Traxxas 3741A Blue-Anodized Aluminum Turnbuckles and Camber Links, Front 39mm (2), rear 49mm (2)
Feature
Aluminum turnbuckles (blue-anodized)Comes with 2 front 39mm camber links and 2 rear 49mm camber links
Traxxas aluminum turnbuckles make it easy to add strength and adjustability to Traxxas models
High-grade 7075-T6 aluminum ensures increased bending stiffness
Assembled w/rod ends & hollow balls and includes wrench
Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles
This product is made from high quality materials and designed for lasting performance
This is for use on RC vehicles such as the Traxxas Stampede and Rustler; consult your user's manual for exact parts listings
Description
This is the 3741A Alum Turnbuckles 39mm Rustler/Stampede from Traxxas. Traxxas has grown to become the number-1 selling name in RTR nitro and electric models for the last 4 years running. No one has done more than Traxxas to advance the RTR category with innovative thinking and fun designs that make it easy for anyone to get started in the great R/C hobby. Traxxas, truly the fastest name in Radio Control.9. Traxxas 3740 Steel Suspension Pins, 2.5x31.5mm (pair)
Feature
Suspension pins, 2.5x31.5mm (king pins)Comes with E-clips
Strengthens caster blocks
Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles
This product is made from high quality materials and designed for lasting performance
This is for use on RC vehicles such as the Traxxas Rustler; consult your user's manual for exact parts listings
Description
This is the 3740 Pin 2.5x31.5mm Rustler (2) from Traxxas. Traxxas has grown to become the number-1 selling name in RTR nitro and electric models for the last 4 years running. No one has done more than Traxxas to advance the RTR category with innovative thinking and fun designs that make it easy for anyone to get started in the great R/C hobby. Traxxas, truly the fastest name in Radio Control.10. Traxxas 3669A 2.8" Talon Tires Pre-glued on Chrome All Star Wheels, TSM Rated (pair)
Feature
Pair of pre-assembled and glued wheels2.8" All-Star black chrome wheels with Talon tires and foam inserts
nitro rear/ electric front (TSM rated)
Fits rear: Jato/3.3, N. Stampede,N. Rustler, N. Sport, Fits front: E. Stampede and E. Rustler
Increase the ride height and ground clearance of any Traxxas stadium truck by adding a set 2.8" Talon tires.
When using 2.8" Talon tires on Nitro Sport, Nitro Rustler, or Jato/3.3 use a clutch bell that is 2-4 teeth smaller than stock
When using 2.8" Talon tires on the electric Rustler use a pinion gear that is 4-5 teeth smaller than stock
Description
Tires & wheels, assembled, glued (2.8") (All-Star black chrome wheels, Talon tires, foam inserts) (nitro rear/ electric front) (2) (TSM rated) Talon assembled and glued 2.8" tire sets make it easy to maintain peak performance. Talon tires are proven to provide "just-right" grip and handling on a wide variety of surfaces. Soft rubber compound with foam inserts extend grip. The All-Star 5-spoke wheels combine structural strength and futuristic styling. The horizontal bead helps to hold the tire, reducing stress placed on the glue joint by tire expansion. The chrome finish is tough for long-lasting good looks. Available in mirror chrome and black chrome finishes. Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. This product is made from high quality materials and designed for long-lasting performance. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.11. Dynamite Dynamite Startup Tool Set for Traxxas Vehicles
Feature
Engineered specifically for Traxxas vehicle ownersConveniently packaged in a durable and easy-to-transport zipper pouch
Description
Key Features
- Engineered specifically for Traxxas vehicle owners
- Conveniently packaged in a durable and easy-to-transport zipper pouch
Overview
Designed with every Traxxas model in mind, this Dynamite tool kit contains everything you need to tear down and rebuild your Traxxas electric or nitro vehicle from top to bottom. You won't find a more comprehensive tool set out there. And to help you easily transport and protect your tools, we've included a convenient, durable pouch.
Tools Included:
NUT DRIVERS- 4, 5, 5.5, 7, & 8mm
HEX DRIVERS- 1.5, 2, 2.5, 3, 3.5 & 4mm
PHILLIPS- 0, 00 & 1
FLATHEAD- 2, 3 & 4
BOX WRENCH- 5 & 8mm
RACHETING HANDLE
All tools fit the ratcheting handle other than the Box Wrench.
Traxxas is a registered trademark of Traxxas, L.P.
12. Apex RC 4 LED 70mm Aluminum Light Bar Fits 1/10 Rock Crawlers and Traxxas Rustler, Stampede, E-Revo, Nitro Rustler, and Jato (9041)
Feature
Great fit on the traxxas rustler, stampede, e-revo, nitro rustler, jato & more.Will work on many 1/10 scale rock crawlers, trucks, stadium trucks, buggys.
70mm long - mounting at 59mm or 74mm with the mounting feet facing in or out (see last picture) please measure where you plan on mounting it to make sure it will fit.
4 super bright led lights - great for running at night, or in poorly lit areas.
Can be mounted on the roof for a truck scale appearance, or on the hood to be better protected during rollovers. Includes 4 screws and bolts to securely mount the light bar to the body.