Finding the best frsky transmitter battery suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Reviews
1. FrSky V8R7-II 2.4Ghz 7CH Receiver
Feature
Package includes one itemDescription
FrSKY ACCST technology is proven, approved by many model associations, tested and reviewed as the leading Chinese 2.4Ghz R/C Technology. If you think DSM2 or FASST is the best, think again!New FrSKY ACCST (Advanced Continuous Channel Shifting Technology) gives you secure radio communicatios in 2.4Ghz band. ACCST 2.4GHz system shifts 80 channels around hundred times per second in the 2.4GHz band. This means that the system is completely resistant to interference in that band. Features:Advanced Continuous Channel Shifting Technology (ACCSTis our advanced tecnology it shifts channel hundred times per second and there is no signal conflicts and interruptions) robust frequency agility.Easy to bind and very fast link-up. Excellent reboot time. True Diversity with two antennas.All channels can be programmed with Failsafe, quickly and easily.Quick and extremely stable in performance.Precise and smooth servo response.Extended range (1.5km-2.5km).Receiver Specification:Operating voltage: 3.0~16VPower consumption: 30mAResolution: 3072Latency: 22msNumber of channels: 7Range: 1.5km-2.5kmDimensions:33.5 x 22 x 12 mmWeight: 5.5gIncluded;1 x 7-channel receiver V8R7-II2. FrSky Taranis Compatible Receiver X6R-148 6-channel 2.4ghz ACCST&SBUS
Feature
1)With external analog telemetry port(AD1), When pins of A1and X (Middle Pin) are connected by the jumper, A1 will change from External Analog2)Telemetry Port to Internal Built-in battery voltage sensor.
3)More number of channels: 1~6ch from conventional channel outputs, 1~16ch from SBUS port.
4)With RSSI PWM output (0~3.3V) on board.
5)Smart Port enabled, realizing two-way full duplex transmission.
Description
X6R receiver features 16 channels (6 normal PWM outputs and all 16 channels on the dedicated Sbus output). It can also work in "D8 Mode to work with the DHT, DJT, DFT and DHT-U transmitter modules. In this mode you have 8 channels. The neat trick is the Smart Port still works in D8 Mode! The X6R can be bound so that it outputs channels 1-6 or 9-14 on the PWM pins. This allows the X6R and X8R to be used in pairs for extended channel outputs.
Model Name:X6R-148
Specifications :
Dimension: 47.42*3.84*14.7mm (L*W*H)
Weight: 15.4g
Antenna:PCB Antenna (Mounted) +150mm Coaxial Antenna with packing
Number of Channels: 16CH (1~6ch from conventional channel outputs, 1~16ch from SBUS port) With RSSI output on board:PWM
voltage output (0~3.3V)
Operating Voltage Range: 4.0~10V
Operating Current: 100mA@5V
Operating Range: full range (>1.5km)
Firmware Upgrade-able
Compatibility: FrSky DFT/DJT/DHT/DHT-U in D_mode
FrSky Taranis X9D Plus/XJT in D8 mode
FrSky Taranis X9D Plus/XJT in D16 mode X6R-EU version only works with FrSky Taranis X9D Plus-EU version/XJT-EU version in D16-EU mode.
Features: 1)With external analog telemetry port(AD1), When pins of A1 and X (Middle Pin) are connected by the jumper, A1 will change from External Analog
2)Telemetry Port to Internal Built-in battery voltage sensor.
3)More number of channels: 1~6ch from conventional channel outputs, 1~16ch from SBUS port.
4)With RSSI PWM output (0~3.3V) on board.
5)Smart Port enabled, realizing two-way full duplex transmission.
3. FrSky 2.4G Taranis X9D Plus transmitter 2000MAH battery
Feature
FrSky 2.4G Taranis X9D Plus transmitter 2000MAH batteryFrSky Brand
New Product
Easy to replace
High Quality
Description
FrSky 2.4G Taranis X9D Plus transmitter 2000MAH battery4. FrSky 2000mAh 7.2V NiMH AA Battery Pack for Taranis Q X7 Transmitter
Feature
OEM FrSky Battery Pack for Taranis Q X77.2V 2000mAh NiMH Pack(6 AA cells)
Made by FrSky
Description
FrSky 2000mAh 7.2V NiMH AA Battery Pack for Taranis Q X7 Transmitter5. FrSky Taranis X9D PLUS 2.4ghz Radio Transmitter with Mode2 for FPV
Feature
Taranis X9D plus 16CH 2.4ghz ACCST Radio (Mode II) with EVA CaseIncludes: Radio - Battery - Charger - Neck strap - User manual - EVA Case
RSSI alarms (warns you of reception problems before it becomes an accident)
Quad bearing gimbals that are silky smooth / State-of-the-art open source software (open TX)
Please Note: Receiver not included.
Description
Taranis X9D plus 16CH 2.4ghz ACCST Radio Features: • RSSI alarms (warns you of reception problems before it becomes an accident) • 16 channels (more when combined with external module) • 64 mixers, 9 flight modes • 16 custom curves with 3-17 points each, 32 logic switches • Self-test of the transmitter antenna • 60 Model memory (expandable via a SD card) • Audio Speech outputs • USB and SD card slot for unlimited memory, and firmware upgrades, sound editing. • Long range system capable of up to 3 times the range of current systems • Quad bearing gimbals that are silky smooth • State-of-the-art open source software (open TX) • Super low latency for ultra-quick response (9ms) • Large adjustable backlit blue to white LCD display • Real-time data logging • Receiver lock (program locked to aircraft) • JR Style module bay for additional RF modules • Processor: STM32 ARM Cortex M3 60MHz • New 2000mah battery • Haptic Vibration Feedback Command Feature Specifications: Model name: Taranis X9D Number of Channels: up to 16 Operating Voltage Range:6-15v (2s, 3s Lipos are acceptable) Operating Current: 260mA maximum (both RF module and backlit are on) Operating Temperature: -10~60C Backlit LCD Screen: 212*64 Monochrome Model Memories: 60 (expandable by SD card) Compatibility: FrSky X series, D series and V8-II series receivers stick mode: Mode 2 (Left hand throttle)6. FrSky S8R 8/16 channel Receiver with 3-axis Stabilization
Feature
Built-in 3-axis gyroscope and 3-axis accelerometer sensor moduleBuilt-in RSSI PWM output(0-3.3V)
Built-in battery voltage detection
Smart Port enabled
SBUS Port enabled
Description
The S8R is a FrSky X-series receiver with built in 3-axis stabilization. For conventional Fixed Wing and Glider Models it will support stabilization, automatic level, hover and Knife-edge flight modes, for Delta Wings or flying wings and V-tail models it supports stabilization and automatic level flight modes. You can edit the type of model and manipulate all these features via the S8R.Config or S8R.lua. The S8R can also be used as a standard 8 channel X series receiver if it is required.
Tip: Use the S8R with 3-axis stabilization as a slave receiver with the RB-10 to give you that extra peace of mind by buying you precious time to bring your model home.
Specification- Dimension: 46.4726.7814.12 mm (LWH)
- Weight: 14g
- Number of Channels: 8/16CH (1-8ch from conventional channel outputs, 1-16ch from SBUS output)
- With RSSI PWM output on board: PWM voltage output(0-3.3V), 100Hz, 1500500us
- Operating Current: 120mA@5V
- Operating Voltage Range: 4.0-10V
- Operating Range: full range
- Gyroscope Measurement Range: 2000dps
- Accelerometer Measurement Range: 4g
- Firmware Upgradeable
- Compatibility: FrSky Taranis X9D Plus/X9E/X7/Horus X12S/XJT in D16 mode
7. EMAX Babyhawk Bind-N-Fly Micro Brushless Quadcopter Built in FrSky XM+ Receiver
Feature
520tvl cmos camera, 5. 8g 40ch vtx. 25mw / 200mw adjustable power for different flying environment.Emax femto micro f3 flight controller with stm32f303 cpu and mpu9250, ideal for micro brushless racing drone.
Furious flight and accurate operation with 1104 5250kv high rpm brushless motors and bullet series dshot escs.
Description
The Emax Babyhawk just got better with a FrSky XM plus receiver pre-installed and an upgraded 40ch adjustable power from 25-200mw, 800TVL camera VTX combo
Babyhawk Specification
- Diagonal wheelbase (without propeller): 87mml Maximum size of aircraft (without antenna, cable): 132mm*132mm*48mm
- Camera integrated with VTX: CMOS 800TVL_25-200MW adjustable frequency 40CH
- Propeller: 2345 Tri-blade propeller
- Flight controller: F3 Femto
- Motor: 1104 5250KV
- ESC: Bullet 6A (BLHeli_S)
- Weight of aircraft (without batteries): 68.5g
FrSky XM Plus receiver Specification
- Dimension: 21.5*12*3.5mm (L*W*H)
- Weight: 1.6g
- Operating range: Full range
- Operating voltage range: 3.7V-10V
- Operating current: 30mA@5V
- Number of Channels: Up to 16 CH from SBUS (CH1-CH15 for PWM, CH16 RSSI for FC)
- Compatibility: FrSky Taranis X9D/ X9D Plus/ Q X7/ X9E/ Horus X12S/ XJT in D16 mode
Include
- Babyhawk quadcopter *1 set
- FrSky XM Plus receiver ( US mode )
- 2345 Tri-blade Propeller CW and CCW *4 pcs each
- Battery *1 pcs
- Manual *1 set
8. FrSky Battery Voltage Sensor - FrSky Telemetry System
Feature
FrSky 2.4G Taranis X9D Plus ACCST Battery Voltage Sensor FBVS-01FrSky Brand
New Product
High Quality
Easy to Replace
Description
Battery Voltage Sensor FrSky Battery Voltage Sensor is provided as Two Way Telemetry System's Optional Accessory.
There are three voltage ranges to choose: 1S lipo for battery voltage range from 0V~6.6V, up to 3S lipo for 0V~13.2V and up to 5S lipo for 0V~19.8V.
Please check the battery voltage division ratio for each option below: Recommended Voltage Option Max Lipo Pack Count Battery Voltage Division Ratio 1S 1S 2:1 2S 3S 4:1 3S 5S 6:1.
9. FrSky Taranis Q X7S with M7 Hall Sensor Gimbal 16 Channels Transmitter Carbon Fiber Version
Feature
Compatibility: Frsky X series, D series and V8- series receivers (plus other receivers if an external module is used)Hall Sensor Gimbals are better than the stock gimbals.Hall sensor gimbals uses magnets to get stick position reading, which is more precise, more durable and smoother.
Switches and Handle.The new switches have a softer feel than the original QX7, they are also slightly angled for better ergonomics.
Battery and Charger.The X7S comes with a 6-cell 2000mAh Ni-Mh battery which is way better than using 1.5V AA batteries. AA batteries have such low capacity you would be replacing them very often.
Wireless Trainer Capability.There is a built-in Bluetooth module inside the Taranis Q X7S, it allows you to connect this radio to another Frsky radio with the same wireless capability as a trainer wirelessly. This will also allow you to connect it to your phone and use the Frsky Telemetry App.
Description
Packing List
- FrSky Taranis Q X7S
- 2000mAh NiMh battery pack (with balancer plug)
- Charger & Power Supply - Can charge both 6-cell NiMh and 2S LiPo
- Carry case
- Neck Strap
- A set of stickers
- Instruction manual
10. FrSky Transmitter Q X7 FCX07 Li/NiMH Dual Mode Charger
Feature
FrSKYFCX07-LiNiMH-Dual-Mode-Charger
Description
Frsky Taranis Q X7 Transmitter Parts Replacement FCX07&CHARGER
ModelFCX07
DC Input12-18V/1A
Charge Current800mA
Battery Type6S Ni-MH/7.2V 2S Li-Po/7.4V
11. FrSky FAS-40 Battery/ESC Current Sensor
Description
Specifications:Dimensions: 31.5x24.5x5mm
Weight: 9.7g
Measurement range: 0-40A
Maximum safe current: 40A
Sensor current consumption: 20mA
Update Rate: 1Hz
Note: The FAS-40 should only be used with FrSky Two-Way (telemetry) receivers that provide data-stream port, such as the Taranis X9D PLUS (FRKX9DPLUS-CASE).
This product was added to our catalog on August 20, 2015.
12. FrSky 2.4G Taranis X9D Plus transmitter 2000MAH battery by FrSky
Feature
FrSky 2.4G Taranis X9D Plus transmitter 2000MAH batteryDescription
FrSky 2.4G Taranis X9D Plus transmitter 2000MAH battery;FrSky Brand;New Product;Easy to replace;High Quality13. FrSky Transmitter Horus X12S Battery Holder