When you want to find s9 antminer, you may need to consider between many choices. Finding the best s9 antminer is not an easy task. In this post, we create a very short list about top 10 the best s9 antminer for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 s9 antminer:
Reviews
1. Bitmain Antminer S9 Bitcoin Miner, 0.098 J/GH Power Efficiency, 13.5TH/s
Feature
Bitcoin Mining Hash Rate: 13.5TH/s 5%Power Consumption: 1323W 10% (Power supply not included)
Built-in web management portal - No separate host computer or software required
Most Power Efficient Bitcoin Miner: 0.098 J/GH 7%
Power supply sold separately - AntMiner APW3++ power supply recommended if you have 220v+. EVGA SuperNova 1600 G2 recommended if you only have 110-120v power.
Description
*POWER SUPPLY IS NOT INCLUDED*If you have 220v-264v power, then Bitmain recommends using the APW3++ power supply.
If you have 110v-120v power (standard power outlets in the US), then the following power supplies have been confirmed to work well:
-Bitmain's APW5
-Two Bitmain APW3++
-EVGA's SuperNova 1600 G2
Specifications:
1. Hash Rate: 13.5 TH/s 5%
2. Power Consumption: 1323W 10%
3. Power Efficiency: 0.098 W/GH 7%
4. ASIC Chip: 189 x BM1387
5. Dimensions: 350mm(L)*135mm(W)*158mm(H)
6. Cooling: 2x 12038 fans
7. Network: Ethernet cable is not included
Notes:
1. Due to the nature of these products, there are higher than normal restocking fees (typically 40%). The restocking fees are typically waived in the event that there is a provable failure that prevents the AntMiner from being within 5% of advertised speeds within the first 30 days. The warranty will be voided by overclocking. In the event that you experience a failure, please reach out to the seller immediately so that we can begin troubleshooting with you and/or processing a replacement.
2. The AntMiner S9 requires TEN 6-pin PCI-e connectors. There are three hash boards that each require THREE 6-pin PCI-e power connectors and one additional 6-pin PCI-e power connector on the controller. All TEN 6-pin PCI-e power connectors are required. Do not connect more than one PSU to the same hashing board!
3. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.
4. Power supply unit is not included. Bitmain recommends the APW3++ for those with 220v power.
5. Very LOUD! Sounds like a whiny vacuum.
6. Metal clanking or rattling is expected when moving the AntMiner S9. The sound is from the hashing boards moving back and forth against the metal frame. This does not mean there are loose parts and does not mean the item is defective.
2. Antminer S9 ~14.0TH/s @ .098W/GH 16nm ASIC Bitcoin Miner with Power Supply
Feature
Bitcoin Mining Hash Rate: 14.0TH/s 5%Power Consumption: 1372W 10%
Built-in web management portal - No separate host computer or software required
Bitmain Power Supply Included with Heavy Duty C13 to NEMA 5-15P Power Cord (14AWG)
Extremely Efficient Bitcoin / Bitcoin Cash Miner: 0.098 J/GH 7%
Description
*BITMAIN POWER SUPPLY & CORD ARE INCLUDED*Warning: Must have 220v-264v power to run! If you only have 110v-120v power (standard power outlets in the US), then you cannot reliably power the AntMiner S9 with a single PSU. We recommend using 2 PSUs together when using 110v-120v power sources.
Specifications:
1. Hash Rate: 14.0 TH/s 5%
2. Power Consumption: 1372W 10%
3. Power Efficiency: 0.098 W/GH 7%
4. ASIC Chip: 189 x BM1387
5. Dimensions: 350mm(L)*135mm(W)*158mm(H)
6. Cooling: 2x 12038 fans
7. Network: Ethernet cable is not included
Notes:
1. Due to the nature of these products, there are higher than normal restocking fees (typically 40%). The restocking fees are typically waived in the event that there is a provable failure within the first 30 days and the warranty has not been voided by overclocking. In the event that you experience a failure, please reach out to the seller immediately so that we can begin troubleshooting with you and/or processing a replacement.
2. The AntMiner S9 requires TEN 6-pin PCI-e connectors. There are three hash boards that each require THREE 6-pin PCI-e power connectors and one additional 6-pin PCI-e power connector on the controller. All TEN 6-pin PCI-e power connectors are required. Do not connect more than one PSU to the same hashing board!
3. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.
4. One BITMAIN Power supply is included with a Heavy Duty C13 to NEMA 5-15P power cord (14AWG).
5. Very LOUD! Sounds like a whiny vacuum.
6. Metal clanking or rattling is expected when moving the AntMiner S9. The sound is from the hashing boards moving back and forth against the metal frame. This does not mean there are loose parts and does not mean the item is defective.
3. Antminer S9 Data Circuit Board
Feature
Replacement for S9 Control BoardWork with ANY batch S9
Description
Replacement for S9 Control Board4. Antminer S9 14 TH/s Bitcoin Miner with Bitmain APW3++ Power Supply
Feature
Bitcoin Mining Hash Rate: 14.0TH/s 5%Power Consumption: 1372W 10%
Built-in web management portal - No separate host computer or software required
Bitmain Power Supply Included with Heavy Duty C13 to NEMA 5-15P Power Cord (14AWG)
Extremely Efficient Bitcoin / Bitcoin Cash Miner: 0.098 J/GH 7%
Description
*BITMAIN POWER SUPPLY & CORD ARE INCLUDED*Warning: Must have 220v-264v power to run! If you only have 110v-120v power (standard power outlets in the US), then you cannot reliably power the AntMiner S9 with a single PSU. We recommend using 2 PSUs together when using 110v-120v power sources.
Specifications:
1. Hash Rate: 14.0 TH/s 5%
2. Power Consumption: 1372W 10%
3. Power Efficiency: 0.098 W/GH 7%
4. ASIC Chip: 189 x BM1387
5. Dimensions: 350mm(L)*135mm(W)*158mm(H)
6. Cooling: 2x 12038 fans
7. Network: Ethernet cable is not included
Notes:
1. Due to the nature of these products, there are higher than normal restocking fees (typically 40%). The restocking fees are typically waived in the event that there is a provable failure within the first 30 days and the warranty has not been voided by overclocking. In the event that you experience a failure, please reach out to the seller immediately so that we can begin troubleshooting with you and/or processing a replacement.
2. The AntMiner S9 requires TEN 6-pin PCI-e connectors. There are three hash boards that each require THREE 6-pin PCI-e power connectors and one additional 6-pin PCI-e power connector on the controller. All TEN 6-pin PCI-e power connectors are required. Do not connect more than one PSU to the same hashing board!
3. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.
4. One BITMAIN Power supply is included with a Heavy Duty C13 to NEMA 5-15P power cord (14AWG).
5. Very LOUD! Sounds like a whiny vacuum.
6. Metal clanking or rattling is expected when moving the AntMiner S9. The sound is from the hashing boards moving back and forth against the metal frame. This does not mean there are loose parts and does not mean the item is defective.
5. AntMiner S9 ~13.0TH/s @ 0.098W/GH 16nm ASIC Bitcoin Miner
Feature
Bitcoin Mining Hash Rate: 13.0TH/s 5%Power Consumption: 1273W 10% (Power supply not included)
Built-in web management portal - No separate host computer or software required
Most Power Efficient Bitcoin Miner: 0.098 J/GH 7%
Power supply sold separately - AntMiner APW3++ power supply recommended if you have 220v+. EVGA SuperNova 1600 G2 recommended if you only have 110-120v power.
Description
*POWER SUPPLY IS NOT INCLUDED*If you have 220v-264v power, then Bitmain recommends using the APW3++ power supply.
If you have 110v-120v power (standard power outlets in the US), then the following power supplies have been confirmed to work well:
-TWO APW3++ power supplies
-The EVGA's SuperNova 1600 G2
AntMiner S9 Specifications:
1. Hash Rate: 13.0 TH/s 5%
2. Power Consumption: 1273W 10% (at the wall, with APW3++, 93% efficiency, 25C ambient temp)
3. Power Efficiency: 0.098 W/GH 7%(at the wall, with APW3++, 93% efficiency, 25C ambient temp)
4. Rated Voltage: 11.60 ~13.00V
5. ASIC Chip: 189 x BM1387
6. Dimensions: 350mm(L)*135mm(W)*158mm(H)
7. Cooling: 2x 12038 fans
8. Operating Temperature: 0 C to 40 C
9. Network Connection: Ethernet (network cable not included)
10. Default Frequency: 550M
Please note the following:
1. Due to the nature of these products, there are higher than normal restocking fees (typically 40%). The restocking fees are typically waived in the event that there is a provable failure within the first 30 days and the warranty has not been voided by overclocking. In the event that you experience a failure, please reach out to the seller immediately so that we can begin troubleshooting with you and/or processing a return.
2. Each AntMiner S9 requires TEN 6-pin PCI-e connectors for 12V DC input (must be very stable power source). There are three hash boards that each require THREE 6-pin PCI-e power connectors and one additional 6-pin PCI-e power connector on the controller. All TEN 6-pin PCI-e power connectors are required. Do not connect more than one PSU to the same hash board to prevent possible damage and instability.
3. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.
4. Power supply unit is not included. Bitmain recommends the APW3++ or the APW5 power supply for the AntMiner S9.
6. AntMiner S9 ~13.5TH/s @ 0.098W/GH 16nm ASIC Bitcoin Miner with Power Supply and Cord
Feature
Power Supply and cord included.Most Power Efficient Miner in Existence: 0.098 J/GH 7%
Built-in web management portal. No separate host computer required.
Hash Rate: 13.5TH/s 7%
AntMiner APW3 power supply recommended only if you have 205v-264v outlet.
Description
S9 Specifications: 1. Hash Rate: 13.5TH/s 5% 2. Power Consumption: 1323W 10% (at the wall, with APW3, 93% efficiency, 25C ambient temp) 3. Power Efficiency: 0.098 W/GH 10%(at the wall, with APW3, 93% efficiency, 25C ambient temp) 4. Rated Voltage: 11.60 ~13.00V 5. ASIC Chip: BM1387 6. Dimensions: 350mm(L)*135mm(W)*158mm(H) 7. Cooling: 2x 12038 fans 8. Operating Temperature: 0 C to 40 C 9. Network Connection: Ethernet 10. Frequency automatically set Please note the following: 1. Each AntMiner S9 requires TEN 6-pin PCI-e connectors for 12V DC input (must be very stable power source) There are three hash boards that require three 6-pin PCI-e connectors each and one additional 6-pin PCI-e connector on the controller. All TEN 6-pin PCI-e connectors are required. Do not connect more than one PSU to the same hash board to prevent possible damage and instability. 2. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter. 3. Power supply unit is included. Bitmain recommends the APW3 only if you have a 205-264v outlet, for voltages lower than 205v please use the EVGA 1600 g2 instead. 4. Cord included.7. Antminer S9 ~13TH/s @0.1 W/GH 16nm ASIC Bitcoin Miner with APW3+-12-1600 PSU
Feature
Bitcoin Mining Hash Rate: 13.0TH/s 5%Mines Bitcoin, Bitcoin Cash, and other SHA256-Based Coins
No Software Required - Built-in Web Interface Allows For Easy Configuration
Extremely Power Efficient - Uses Just 0.098 Watts/GH
Includes PSU and 15ft Heavy Duty C13 to Nema 5-15P Power Cord
Description
*BITMAIN POWER SUPPLY & CORD ARE INCLUDED*Warning: Must have 220v-264v power to run! If you only have 110v-120v power (standard power outlets in the US), then you cannot reliably power the AntMiner S9 with a single PSU. We recommend using 2 PSUs together when using 110v-120v power sources.
Specifications:
1. Hash Rate: 13.0 TH/s 5%
2. Power Consumption: 1274 10%
3. Power Efficiency: 0.098 W/GH 7%
4. ASIC Chip: 189 x BM1387
5. Dimensions: 350mm(L)*135mm(W)*158mm(H)
6. Cooling: 2x 12038 fans
7. Network: Ethernet cable is not included
Notes:
1. Due to the nature of these products, there are higher than normal restocking fees (typically 40%). The restocking fees are typically waived in the event that there is a provable failure within the first 30 days and the warranty has not been voided by overclocking. In the event that you experience a failure, please reach out to the seller immediately so that we can begin troubleshooting with you and/or processing a replacement.
2. The AntMiner S9 requires TEN 6-pin PCI-e connectors. There are three hash boards that each require THREE 6-pin PCI-e power connectors and one additional 6-pin PCI-e power connector on the controller. All TEN 6-pin PCI-e power connectors are required. Do not connect more than one PSU to the same hashing board!
3. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.
4. One BITMAIN Power supply is included with a 15ft C13 to NEMA 5-15P power cord (14AWG).
5. Very LOUD! Sounds like a whiny vacuum.
6. Metal clanking or rattling is expected when moving the AntMiner S9. The sound is from the hashing boards moving back and forth against the metal frame. This does not mean there are loose parts and does not mean the item is defective.
8. Professional 8 GPU Miner Case Aluminum Stackable Mining Case Rig Open Air Frame for Ethereum(ETH)/ETC/ZCash Excellent air Convection Design to Improve GPU Performance and Life(Without Fans)
Feature
8 GPU Mining Aluminum Case Rig Open Air Frame for Crypto Coin CurrencyIt is probably the best frame for mining virtual currency you can buy,Attached instructions, if not, please contact me and I will send it to you via EMAIL
It can be stacked, elegant, easy to move, and reserved enough space for equipment overhaul
Professional team design for miner accelerating the air convection, enhancing the cooling and extending the service life of graphics cards
High quality aluminum alloy material, strong, durable and available for repeated addition, fully protecting your GPU and electronic device
Description
8 GPU Mining Aluminum Case Rig Open Air Frame for Crypto Coin Currencystandard aluminum alloy profiles, strong and durable, full protection of graphics cards and electronic devices, can be firmly superimposed
wide body heat dissipation design, greatly increase the distance between the graphics cards, ensure good heat dissipation effect, easy installation and maintenance
Stackable open air design, perfect for any type of GPU scrypt mining such as Litecoin, Dogecoin, Earthcoin, etc. Also great for Bitcoin ASICs.
Keep your video cards extra cool with this open air design. Plenty of room between cards allow airflow.
standard aluminum alloy profiles, strong and durable, full protection of graphics cards and electronic devices, can be firmly superimposed
Features:
1. Brand new Aluminum Alloy material body
2. 8 GPU Enhanced
3. Generous space between the GPUs, making them Cool n Quiet.
4. Full Anodized Aluminum Alloy, precision crafted for the pro miners, with love.
5. Support ATX/MATX Motherboard.
6. Support Single or Dual PSU hosting, hard drive, PSU mounting Kit.
7. Support Seven 12CM Computer Fan mount position
8. Support Dual PSU.
9. Size:365 mm x 880mm x 380mm
10. Support up to 32CM GPU
Package Included:
1set Open Air Frame (ONLY FRAME)
Warranty:
3 Year Warranty and 30-Day Return Guarantee
Note:
This listing DOES NOT include CPU, GPU, PSU, Fans,Motherboards, RAMs, or any cables.
Please contact us first when you have any problem,we will give you the best service and solve the problem ASAP.Thank you so much.
9. AntMiner Bitmain S9 14.5T ASIC Miner Include Bitmain APW3++ PSU Power Supply and Power Cord
Feature
Bitcoin BTC Miner Bitmain Antminer S9 14.5T Mining Hash Rate: 14.5TH / s 5%,include Bitmain Antminer APW3++ PSU and power cord
Most Power Efficient and stable Bitcoin Miner: 0,093 J / GH 10%
No Software Required - Built-in Web Interface Allows For Easy Configuration
Power consumption: 1350W 5%,
Description
Special provisionBreaking down cryptocurrencies involves financial risks. These risks may relate to changes in the exchange rate of the cryptocurrency or to changes in the algorithm used to mine the cryptocurrency. Please consider carefully before you make a purchase, as we do not accept refund requests for orders of this batch.
Description
1.Mining Hash Rate: 14.50 5%
.
2. Power Consumption: 1350W 10 %.
.
3. Power Efficiency: 93.1210%.
. .
5. Dimensions: 350mm ( L) * 135mm (W) * 158mm (H).
6. Cooling: 2x 12038 fans.
.
7. Network: Ethernet cable is not included
10. Antminer S9 ~14.0TH/s @ .098W/GH 16nm ASIC Bitcoin Miner Power Supply Included
Feature
Bitcoin Mining Hash Rate: 14.0TH/s 5%Power Consumption: 1372W 10%
Built-in web management portal - No separate host computer or software required
Bitmain Power Supply Included with Heavy Duty C13 to NEMA 5-15P Power Cord (14AWG)
Extremely Efficient Bitcoin / Bitcoin Cash Miner: 0.098 J/GH 7%
Description
*BITMAIN POWER SUPPLY & CORD ARE INCLUDED*Warning: Must have 220v-264v power to run! If you only have 110v-120v power (standard power outlets in the US), then you cannot reliably power the AntMiner S9 with a single PSU. We recommend using 2 PSUs together when using 110v-120v power sources.
Specifications:
1. Hash Rate: 14.0 TH/s 5%
2. Power Consumption: 1372W 10%
3. Power Efficiency: 0.098 W/GH 7%
4. ASIC Chip: 189 x BM1387
5. Dimensions: 350mm(L)*135mm(W)*158mm(H)
6. Cooling: 2x 12038 fans
7. Network: Ethernet cable is not included
Notes:
1. Due to the nature of these products, there are higher than normal restocking fees (typically 40%). The restocking fees are typically waived in the event that there is a provable failure within the first 30 days and the warranty has not been voided by overclocking. In the event that you experience a failure, please reach out to the seller immediately so that we can begin troubleshooting with you and/or processing a replacement.
2. The AntMiner S9 requires TEN 6-pin PCI-e connectors. There are three hash boards that each require THREE 6-pin PCI-e power connectors and one additional 6-pin PCI-e power connector on the controller. All TEN 6-pin PCI-e power connectors are required. Do not connect more than one PSU to the same hashing board!
3. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.
4. One BITMAIN Power supply is included with a Heavy Duty C13 to NEMA 5-15P power cord (14AWG).
5. Very LOUD! Sounds like a whiny vacuum.
6. Metal clanking or rattling is expected when moving the AntMiner S9. The sound is from the hashing boards moving back and forth against the metal frame. This does not mean there are loose parts and does not mean the item is defective.