If you looking for fluke 115 fuse then you are right place. We are searching for the best fluke 115 fuse on the market and analyze these products to provide you the best choice.
Reviews
1. Combo pack: 1 piece Fluke 803293 11 Amp 1000V and 1 piece Fluke 943121 440mA 1000V Fluke Digital Multimeter Replacement Fuse
Feature
Nominal current: 11 A and 44/100AMaximum voltage to ground: 1000-Volt
Used for fluke 1587 hybrid insulation tester and multime
Used for fluke 77-3 auto ranging digital multimeter
This combo pack includes 1 piece of Fluke 803293 11 Amp 1000V and 1 piece Fluke 943121 440mA (0.44A) 1000V
Description
From the Manufacturer Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. Since its founding in 1948, Fluke has helped define and grow a unique technology market, providing testing and troubleshooting capabilities that have grown to mission critical status in manufacturing and service industries. From industrial electronic installation, maintenance and service, to precision measurement and quality control, Fluke tools help keep business and industry around the globe up and running. As electrical systems grow more and more complex, spikes, transients, surges and sudden over-Voltage events become more common. These can trigger a sequence of events that may lead to serious injury. This is why test equipment must be designed to protect people who work in this high-Voltage high-current environment. Fluke digital multimeters have been designed to meet the new IEC-1010 standards. More importantly, they have been approved by CSA as actually making these standards, which means they are designed to protect you against transients in three-phase distribution systems. Now you can stock up on Fluke 803293 11-AMP 1000-Volt and Fluke 943121 440mA 1000V replacement fuses for Fluke digital multimeters.2. 20Pcs Heat Protection 115 Celsius 250V 10A Thermal Fuse
Feature
Product Name: Thermal Fuse; Rated Functioning Temperature: 115CRated Voltage: 250V; Rated Current: 10A
Pin Diameter: 1mm/ 0.03"; Body Size: 13 x 4mm/ 0.51" x 0.16" (L*D); Total Length: 65mm/ 2.6"
Material: Metal; Color: Silver Tone; Weight: 21g
Package Content: 20 x Thermal Fuse
Description
Metal RY thermal fuse (thermal cut off, temperature fuse) which use heat sensitive grain materials (organic chemical) as heat sensitive material. Function is to cut off the circuit of appliances when temperature exceed specified TF value because of unexpected fault. Widely used in electric current provider, power switch, computer, telephone, home appliance, communication products, all kinds of instrument and electronic and electric components, motor and all kinds of small home appliance such as electric iron, thermoelectric blower, microwave oven, refrigerator etc as heat protection, etc.3. Fluke 115 Compact True-RMS Digital Multimeter
Feature
True-rms for accurate measurements on non-linear loadssafety rated
Large white LED Backlight to work in poorly lit areas
Check continuity, frequency, capacitance and diode test
Measures 20 A (30 seconds momentary; 10 A continuous)
True-RMS for accurate measurements on non-linear loads
CAT III 600 V safety rated
Large white LED backlight to work in poorly lit areas
Description
The Fluke 115 Field Service True-RMS Technicians Multimeter is a compact meter for field service technicians and it is also the solution for a wide variety of electrical and electronic testing applications. It includes a 4mm silicone test lead set, a user manual and an installed 9V battery. The Fluke 115 displays true-rms voltage and current readings with 6000 count resolution, test diodes frequency, continuity and capacitance and provides Min/Max/Average readings to record signal fluctuations. A large white LED backlight aids work in poorly lit areas. Its easy-open battery access door makes battery changes a snap. It has been independently tested for safe use in CAT III 600 Volt environments Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. Since its founding in 1948, Fluke has helped define and grow a unique technology market, providing testing and troubleshooting capabilities that have grown to mission critical status in manufacturing and service industries. From industrial electronic installation, maintenance and service, to precision measurement and quality control, Fluke tools help keep business and industry around the globe up and running.4. Fluke 116 HVAC Multimeter
Feature
Built in thermometer for HVAC applicationsMicroamps to test flame sensors
LoZ: helps prevent false readings due to ghost voltage
Large white LED backlight to work in poorly lit areas
Resistance, continuity, frequency and capacitance
Description
For the complete solution to HVAC troubleshooting the extra value-packed HVAC Technician's Combo Kit, provides the ability to troubleshoot and solve problems more efficiently by providing all the needed accessories an HVAC professional would need in a compact carry case.5. Fluke 943121 440mA 1000-V Replacement Fuse
Feature
Current Rating: 440 maBlow Characteristic: Fast Acting
Voltage Rating, VAC: 1000V
Cartridge Fuse
1 per Pack
Description
FL943121 Warranty: -No warranty.6. Fluke 113 True-RMS Utility Multimeter
Feature
Digital multimeter measures AC/DC voltage, resistance, and capacitance and performs continuity and diode testsTrue RMS meter provides accurate readings when measuring linear or nonlinear loads where the current or voltage has a sinusoidal or nonsinusoidal waveform
Simultaneously checks for voltage and continuity
Manual- and auto-ranging modes for user flexibility
Safety rated for Category III to 600V and Category IV to 300V
Description
The Fluke 113 True-RMS Utility Multimeter is a digital multimeter (also known as a multitester) that measures AC/DC voltage to 600V, resistance to 60 kiloohms, and capacitance to 9,999 microfarads. The meter has a diode check for testing general-purpose germanium, silicon, and power diodes, and a continuity beeper which provides audible detection of resistance by turning on at less than 25 ohms and off at 250 ohms. It is also able to simultaneously check for voltage and continuity. This true RMS meter provides accurate readings when measuring linear or nonlinear loads where the current or voltage has a sinusoidal or nonsinusoidal waveform and has both manual- and auto-ranging capabilities for user flexibility. A Max/Min function records signal fluctuations and a hold function freezes measurements on the display. The 6000-count resolution, 3-1/2 digit digital display is backlit for readability in low-light conditions. The meter is safety rated for Category III to 600V and Category IV to 300V. It uses a 9V battery (installed) with a battery life of approximately 300 hours without backlight and has a sleep mode to maximize battery life. The meter measures 6.58 x 3.35 x 1.81 inches (H x W x D) and weighs 13 oz./404 g. (H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.) This meter includes a holster with built-in probe holders for convenient storage.
Multimeters are electrical test meters that measure multiple properties of an electrical circuit, such as current, voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, multimeters diagnose electrical problems in electrical equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Multimeters display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltage. Safety ratings are based on International Electrotechnical Commission (IEC) standards for low-voltage test equipment. IEC 61010 delineates four overvoltage installation categories. In general, a meter with a category IV rating will provide more protection against transient voltages than a meter with a lower category rating.
Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.
What's in the Box?
- Fluke 113 utility multimeter
- Test leads
- 9V battery
- Instructions
7. Fluke 803293 11 Amp 1000 Volt Fluke Digital Multimeter Replacement Fuse
Feature
Nominal current: 11 AMaximum voltage to ground: 1000-Volt
Used for fluke 1587 hybrid insulation tester and multime
Used for fluke 77-3 auto ranging digital multimeter
1 Per pack
Description
Built-in fuses for additional measurement protection Probes allow indication of live voltage even with blown fuse, helping to prevent the user from thinking no voltage is present 2 mm threaded probe tips include removable 4 mm lantern-style spring contacts and removable GS38 insulated IC caps for probing closely spaced leads Operating temperature - 20 C to 50 C CAT III 1000 V, CAT IV 600 V, 10 A rating Probes allow indication of live voltage even with blown fuse for added security Built-in 1000 V, 11 A fuses with 20 kA interrupt rating Probes allow indication of live voltage even with blown fuse, helping to prevent the user from thinking no voltage is present 2 mm threaded probe tips include removable 4 mm lantern-style spring contacts and removable GS38 insulated IC caps for probing closely spaced leads Operating temperature - 20 C to 50 C (-5 F to 120 F) CAT III 1000 V, CAT IV 600 V, 10 A rating8. DMM-11 (DMM-11A, DMM11) 11A 1000V Fluke 803293 Digital Multimeter Replacement Fuse
Feature
Digital Multimeter Fuse11A 1000V, DMM 11 DMM11A
Description
DMM-11 (DMM-11A, DMM11) 11A 1000V Fluke 803293 Digital Multimeter Replacement Fuse9. NTE Electronics NTE8015 Thermal Cutoff Fuse, Radial Lead, 115 Degree C Functioning Temperature, 5 Amps, 250V (Pack of 2)
Feature
Maximum rating: 5 Amps, 250 VoltsFull 2 3/4" leads to fit all replacement configurations
All types meet the requirements of Underwriters Laboratories Specifications and CUL
RoHS Compliant
Description
The TCO (Thermal Cut-Off) responds to temperature by interrupting an electrical circuit when the operating and/or environ- mental temperature exceeds the thermal rating of the device. NTE's radial lead TCOs accomplish this when the internal fusible alloy is melted by reaching the temperature of the melting point of the alloy, forming two separate balls at the edges of the leads by surface tension of the alloy to permanently open the circuit. Axial-lead TCO devices presently predominate over radial-lead devices. This results, at least in part, from design difficulties that exist in manufacturing a reliable, inexpensive radial-lead TCO device. However, in many circuit applications radial-lead devices are preferable since they take up a smaller area on a printed circuit board. Their compact size enables ease of assembly into the smallest of transformers ensuring total thermal protection.10. Fluke 892583 Digital Multimeter Fast Acting Replacement Fuse, 600V AC Voltage, 15A AC Current
Feature
Digital multimeter replacement fuseNominal current: 15A
Maximum voltage to ground: 600V
Description
Digital multimeter replacement fuse. Nominal current: 15A. Maximum voltage to ground: 600V.11. Pack of 2 pieces, DMM-11 (DMM-11A, DMM11) 11A 1000V Fluke 803293 Digital multimeter replacement Fuse
Feature
11A, 1000V Fuses, Fast Acting2 pieces of Digital Multimeter Replacement Fuse per package
Dimension: 34.9 mm (1.375 In.) L x 10 mm (0.406 In.) D
Fluke 803293, Construction - Melamine Tube
DIGITAL MULTIMETER REPLACEMENT FUSES
Description
We will ship part#: DMM-B-11, which is the same as DMM-11. This fuse is also called/known as Fluke fuse 11A 1000V, Fluke 203403, Fluke fuse 203406 Fluke 803293, Fluke 943118, BUSSMANN fuse DMM-11 or DMM-11A, or BUSSMANN DMM-B-11 or DMM-B-11A. This fuse is non returnable.12. Combo pack: 1 piece DMM-11A (DMM11) and 1 piece DMM-44/100 (DMM 44 100) Digital multimeter replacement Fuse (Fluke)
Feature
11A, 1000V Fuses, Fast Acting and 44/100A, 1000VThis combo pack has 1 piece of DMM 11A and 1 piece of DMM-44/100
DMM-11A dimension: 0.406" Dia x 1.500" L (10.30mm x 38.00mm)
DMM-44/100 dimension: 0.406" Dia x 1.375" L (10.31mm x 34.93mm)
DIGITAL MULTIMETER REPLACEMENT FUSES; Construction - Melamine Tube
Description
We will ship part#: DMM 11A (1 piece) and DMM 44/100A (1 piece). DMM-11A is also called/known as Fluke fuse 11A 1000V, Fluke 203403, Fluke fuse 203406 Fluke 803293, Fluke 943118 DMM-44/100 is also called/known as Fluke fuse 440mA 1000V, Fluke fuse 943121, Fluke fuse 203411 or Fluke fuse 203414. This fuse is non returnable.13. Slo Blo Fuse, 30A, 115v, MDA
Feature
Slo Blo Fuse, 30A, 115v, MDA.Description
MDA Series Slo Blo Fuse.
Ceramic construction for protection of loads to 30 Amps.
Product Specifications:
Fuse Type: Fuse Holder
Fuse Style: MDA Series
Fuse Amperage: 30A
Length: 1-1/4"
Diameter: 1/4"
14. Slo Blo Fuse, 30A, 115v, MDA
Feature
Fuse Type : Fuse HolderFuse Style : MDA Series
Fuse Amperage : 30A
Length : 1-1/4"
Diameter : 1/4"
Description
MDA Series Slo Blo Fuse.Ceramic construction for protection of loads to 30 amps15. Fluke 115 Digital Multimeter with True-RMS
Feature
Product Type: MultimeterAC Voltage accuracy: 2.0 percent + 3 (500 Hz to 1 kHz)
AC max (Voltage): 600
AC min (Voltage): 0.0001
DC Voltage accuracy: 0.5 percent + 2