If you looking for dc motor 600w then you are right place. We are searching for the best dc motor 600w on the market and analyze these products to provide you the best choice.
Reviews
1. 400W CNC DC Air Cooled Spindle Motor ER8 NVBDL+ 12000rpm Brushless Spindle Motor kit + 600w Brushless Motor Driver Without Hall LCD Panel + 55mm Mount Bracket For small and medium-sized processing
Feature
We design Brushless spindle driver NVBDL+ specialized for the ecomomic engraving machine,it matchs with the brushless DC motor.With the updated DSP technology,the driver can drive the motor to output more precise speed and bigger torque comparing with current drivers.We adopt the idea from the inverter, designed independent demountable panel.The users can take down the panel from the main driver and install it on the controller cabinet.By the panel,we can set the parameter,control motor speed and start/stop,very convenient.
1) Note: pls see clearly,this Spindle motor output shaft with ER8 collet,and output shaft is complete shaft,can't exchange to ER11,ER16 or other any type chuck shaft 2)Power: 400W, 3) Input Voltage: 48V ,4) Rotating speed: 12000 R/Min, 5) Torque: 0.45 N.m ,6) Insulation resistance: > 2ohms, 7) Dielectric strength: 400V, 8) Size: 55mm diameter
1) High performance, low prices, 2) DSP main control module, 3) No current passing when no movement, 4) Voltage range 24VDC-60VDC, 5) Demountable panel, 6) Maximum driver power 600W, 7) 3 debugging ways: Panel potentiometer, external voltage signal, external PWM Signal
NVBDL + without Hall feedback, & when you order agter,pls let me know your email ID,the English user manual will send by email &
Description
Package include:1 x 600w Brushless motor driver without hall
1 x 400w Brushless spindle motor ER8 without hall
1 x 55mm Spindle Motor mount bracket clamp
when you order after, pls let me know your email ID,the English user manual will send by email.
Note: pls see clearly,this Spindle motor output shaft with ER8 collet,and output shaft is complete shaft,can't exchange to ER11,ER16 or other any type chuck shaft
Products brief introduction
This brushless driver is without hall.It can be used to engrave metal or non-metal and other materials.
Specification feature
brushless driver is without hall:
1) High performance, low prices
2) DSP main control module
3) No current passing when no movement
4) Voltage range 24VDC-60VDC
5) Demountable panel
6) Maximum driver power 600W
7) 3 debugging ways: Panel potentiometer, external voltage signal, external PWM Signal
8) Maximum driver motor running speed 12000R/Min.
9) Speed testing port for user to inspect the real speed.
10) Internal over-voltage, over-current and stalling inspection
11) Input signal TTL compatible
Brushless spindle motor
1) Power: 400W
2) Input Voltage: 48V
3) Rotating speed: 12000 R/Min
4) Collet: ER8
5)Torque: 0.45 N.m
6) Insulation resistance: > 2ohms
7) Dielectric strength: 400V
8) Diameter: 55mm
9) Chuck portion length: Arbor parts 35mm, (including the nut and sandwich 43mm)10) Part chuck diameter: 16mm
11) Total motor length: 172mm (comprising gripping parts and motor)
12) Size: 55mm diameter 13) Spindle Weight: 1.1KG
14) Spindle runout off: about 0.01-0.03mm.
15) Mount: Product outline dimension is 118*76*33mm,The two installing holes size is 110mm
User manual link: https://drive.google.com/file/d/1ayNCr25l_ZhJ5zeEHPct9DGB3XCdCjI4/view?usp=sharing, pls dowbload all files
2. DC 24V 40A 600W RF Wireless Electric Motor CCW Controller Reversing Remote Control Relay Switch For Car Tarpaulin Cover(jog mode)
Feature
DC motor controller is DC 24V 40A high power wireless remote control motor forwards reverse controllerThe DC24V 40A relay recommends a load less than 600W motor
This model can not be controlled by line control, the condition of the line control is very high, which can be achieved without the electrostatic use
The forward and reverse controllers mainly use jog mode
Receiver has limit terminal, can connect limit switch
Description
This RF DC Motor controller can remote control the speed up and down, positive and reversing rotation and stop of the brushed DC motor. It owns powerful function, stable performance and beautiful appearance.
Specifications:
Model: AT2440
Type: double-channel remote control switch
Working voltage: 24V
Total load: Max.600W
Remote distance: 100M
Working temperature: - 20 ~ 70
Receiver size: 115 x 90 x 40mm/4.53 x 3.54 x 1.57inch
Remote control size : 105 x 40mm/4.13 x 1.57inch
Technical parameters:
Receiver:
1. Working voltage: DC24V
2. Output mode: voltage output
3. Contact capacity: 10A MAX
4. Standby current: 7MA
5. Work temperature: 70 degrees - 20
6. Receiving sensitivity: -114dBm
The remote control:
1. Working voltage: 12V23A battery power supply
2. Working current: 25MA
3. Encoding method: fixed code/learning code
4. Modulation: ASK (amplitude modulation)
5. Launch distance: 100-500m
(This is the theoretical distance of the space without interference, and the actual use is determined according to the interference size and the receiving sensitivity of the environment, generally taking the nominal value of 10% -30%).
Working mode:
Jog mode: Press the upper button and keep, the motor keeps turning, release the button, the motor stops turning. Press the down the button motor keeps reversing, release the button, and the motor stops turning.
Package Included:
1 x Motor Remote Controller
3. Tarp Gear 12 Volt DC Motor 5-Bolt Mounts, 600W 0.8HP
Feature
Tarp Gear 12 Volt DC Motor 5-Bolt Mounts, 600W 0.8HPTarp Gear
90:1 Gear box
motor
cnc part
Description
Brand New in the box, 600 Watt / 0.8 HP Voltage: 12VDC Current No load Current : 20 Amps No load Speed: 45 RPM at the output shaft 90:1 Gear Ratio Load Torque:37 N.M Load Speed: 38 RPM with chrome cover and mounting hardware! Sealed gearbox and driveshaft A 5-hole mounting pattern Works with the 3-hole and 4-hole mountings 2 hole shaft for most drop in replacement. Standard shaft Length 3" Diameter 0.75"4. NJPOWER 600w high Speed Spindle Motor air Cooled Motor DC Spindle Collet for CNC Engraving Machine Drilling 1pcs
Description
600w high speed spindle motor air cooled motor DC spindle collet for cnc engraving machine drilling 1pcs5. AEEDAIRY 600w high Speed Spindle Motor air Cooled Motor DC Spindle Collet for CNC Engraving Machine Drilling 1pcs
Description
600w high speed spindle motor air cooled motor DC spindle collet for cnc engraving machine drilling 1pcs6. KNACRO DC 9-60V PWM Motor Controller 10A 600W 12V/24V/36V/48V/60V DC Motor Controller Maximum power 600W
Feature
Input voltage: DC9-60V.Output voltage: Load Linear.Input Current: require large than the motor operating current.Output Current: determine load size.
Sustained current: 10A within.Maximum power: 600W.Quiescent Current: 0.01ma.
Speed type: modulated current.Speed mode: linear potentiometer 270 degrees.Speed range: 0-100%.
Operating frequency: 25KHZ.Reverse polarity protection.
Description
Input voltage: DC9-60V.Output voltage: Load Linear.Input Current: require large than the motor operating current.Output Current: determine load size.
Sustained current: 10A within.Maximum power: 600W.Quiescent Current: 0.01ma.
Speed type: modulated current.Speed mode: linear potentiometer 270 degrees.Speed range: 0-100%.
Operating frequency: 25KHZ.Reverse polarity protection.
Input voltage: DC9-60V.
Output voltage: Load Linear.
Input Current: require large than the motor operating current.
Output Current: determine load size.
Sustained current: 10A within.
Maximum power: 600W.
Quiescent Current: 0.01ma.
Speed type: modulated current.
Speed mode: linear potentiometer 270 degrees.
Speed range: 0-100%.
Operating frequency: 25KHZ.
Reverse polarity protection.
Size: 92 * 58 * 36mm(L*W*H).
Weight: 125g.
7. DC 9V-60V 20A Pulse Width Modulator PWM Motor Speed Controller Max 600W
Feature
9V-60V 20A DC Motor Speed ControllerRated Current: 20A(Maximum Output Current)
Adopt unique imported super high-power tube, lower heatness, more torque, more stable performance.
Increase the switch function, when cranked to the minimum and then further down will shut output.
Description
Features:Power Requirement: DC 9V-60V
Rated Current: 20A(Maximum Output Current)
Control Motor Power: Max 600w
Standby current: 0.01A(Standby)
Regulation range: 5-99%
Frequency: 18Khz
Dimensions: 50mm x 75mm x 35mm
Weight: 130g
Adopt unique imported super high-power tube, lower heatness, more torque, more stable performance.
Increase the switch function, when cranked to the minimum and then further down will shut output.
With power indicator, input and output adopt brand terminal, durable mold aluminum housing.
Package includes:
1x 9V-60V 20A DC Motor Speed Controller
8. ER16 DC Motor 600w 13200RPM Spindle Motor 24-110VDC Engraver Cutter Marker CNC
Feature
Spindle motor: New DC motor (NMB imported bearings)Operating voltage: 24-110VDC (DC voltage)
Power: 600W
No-load speed: 2880-13200r / min
Torque: 600mN.m.
Description
Note:This kit comes standard 8mm collet,
Other specifications required collet please leave a message
Parameter:
Spindle motor: New DC motor (NMB imported bearings)
Operating voltage: 24-110VDC (DC voltage)
Power: 600W
No-load speed: 2880-13200r / min
Torque: 600mN.m.
Insulation resistance:> 2 megohms
Dielectric strength: 400V
Motor Body diameter: 57mm, output shaft diameter: 9.525mm bold axis strength is better
Collet portion length: Arbor parts 37 mm, including the nut and sandwich 47 mm
Part Collet diameter: 20mm
Motor Overall Length: 232mm (containing gripping parts and motor)
Spindle Weight: 1.8KG
Spindle radial runout about 0.01-0.03.
It can be used for engraving metal or non-metal and other materials.
The man comes with forced air cooling, can work long hours.
ATT to the collet, we will package it very well taken damage during the transportation. It is very frigile, if it get any problem, the whole item will be damaged.
we will not take any responsibility if buyer break it
Package:
1pc 600w 13200RPM ER16 Spindle Motor 24-110VDC Engraver Cutter Marker CNC DC Motor
9. Go Power! GP-600 600-Watt Modified Sine Wave Inverter
Feature
600 watts of continuous powerUse GP-DC-KIT2 for easy hook-up to the battery
2 AC outlets to plug into
Over voltage, under voltage and overload protections
1 year warranty
Description
Go Power! 600-Watt Modified Sine Wave Inverter takes in 12 Volt DC power and converts it to AC household power to run loads up to 600-Watt of continuous power. This device can surge to 860-Watt as well as contains all instructions.10. eDealMax AC 250V 15A ON/Off / ON SPDT 3 Tornillo Terminlas 3 Posicin del selector
Feature
Nombre del producto: Interruptor de palanca; Tipo: SPDTPosicin: 3 Posicin (ON / OFF / ON); Orificio de montaje Dimetro: 11.8mm / 0,456'
Tamao principal de cuerpo: 31 x 20 x 22 mm / 1,2' x 0,8' x 0,8 '(L * W * H); Altura total: 56 mm / 2,2'
Material principal: Metal; color: naranja, tono de plata
Peso: 22 g; Contenido del paquete: 1 x interruptor de palanca