If you looking for banana pi r1 then you are right place. We are searching for the best banana pi r1 on the market and analyze these products to provide you the best choice.
Reviews
1. Banana PI BPI R1 Smart Home Wire 2G LPDDR3+8GBEMMC Open-source Development Board Single Board raspberry pi compatible, Shipping with Powerful Accessories
Feature
CPU: A20 ARM Cortex -A7 Dual-Core; GPU: ARM Mali400MP2Complies with OpenGL ES 2.0/1.1RAM: 1GB DDR3(shared with GPU); Onboard Storage: MicroSD (Max64G) card slot up to 2T on 2.5 SATA Disk
OS: Android 4.2 and Linux etc.; USB2.0 Port: USB Host and Micro USB(OTG); Remote: IR
Power Source: 5V via Micro USB (DC in Only); GPIO: GPIO, UART, I2C BUS, SPI BUS, WITH TWO CHIP SELECTS, CAN bus, ADC, PW
Banana Pi R1 can easily run with the game and support 1080P high definition video output.
Description
The BPI-R1 is the dual core Android 4.4 product which better than Linux product. It can run with Android 4.4 smoothly and with 5 Gigabit ethernet port, SATA Socket.also support Linux OS, and Openwrt os.
Features:
CPU: A20 ARM Cortex -A7 Dual-Core
GPU: ARM Mali400MP2Complies with OpenGL ES 2.0/1.1
RAM: 1GB DDR3(shared with GPU)
Onboard Storage: MicroSD (Max64G) card slot up to 2T on 2.5 SATA Disk
USB2.0 Port: USB Host and Micro USB(OTG)
PCB Dimension: 148 x 100 mm
Power Source: 5V via Micro USB (DC in Only)
GPIO: GPIO, UART, I2C BUS, SPI BUS, WITH TWO CHIP SELECTS, CAN bus, ADC, PW
OS: Android 4.2 and Linux etc.
Shipping list:
Banana Pi R1 Board x1
Micro USB Cable x1
Power adapter x1
Arylic Case x1
Antenna x2
Technical Support:
Wiki: https://en.wikipedia.org/wiki/Banana_Pi#Banana_Pi_R1
Resource: http://www.bananapi.com/product/detail_3.html
Forum: http://www.bananapi.com/bbs/
Expert Support: firefly@ smartfire.cn Skype: smartfire_cn
Product Customization: firefly@ smartfire.cn
2. Banana PI BPI R1 Smart Home Wire 2G LPDDR3+8GBEMMC Open-source Development Board Single Board raspberry pi compatible
Feature
CPU: A20 ARM Cortex -A7 Dual-Core; GPU: ARM Mali400MP2Complies with OpenGL ES 2.0/1.1RAM: 1GB DDR3(shared with GPU); Onboard Storage: MicroSD (Max64G) card slot up to 2T on 2.5 SATA Disk
OS: Android 4.2 and Linux etc.; USB2.0 Port: USB Host and Micro USB(OTG); Remote: IR
Power Source: 5V via Micro USB (DC in Only); GPIO: GPIO, UART, I2C BUS, SPI BUS, WITH TWO CHIP SELECTS, CAN bus, ADC, PW
Banana Pi R1 can easily run with the game and support 1080P high definition video output.
Description
The BPI-R1 is the dual core Android 4.4 product which better than Linux product. It can run with Android 4.4 smoothly and with 5 Gigabit ethernet port, SATA Socket.also support Linux OS, and Openwrt os.
Features:
CPU: A20 ARM Cortex -A7 Dual-Core
GPU: ARM Mali400MP2Complies with OpenGL ES 2.0/1.1
RAM: 1GB DDR3(shared with GPU)
Onboard Storage: MicroSD (Max64G) card slot up to 2T on 2.5 SATA Disk
USB2.0 Port: USB Host and Micro USB(OTG)
PCB Dimension: 148 x 100 mm
Power Source: 5V via Micro USB (DC in Only)
GPIO: GPIO, UART, I2C BUS, SPI BUS, WITH TWO CHIP SELECTS, CAN bus, ADC, PW
OS: Android 4.2 and Linux etc.
Shipping list:
Banana Pi R1 Board x1
Antenna x2
Technical Support:
Wiki: https://en.wikipedia.org/wiki/Banana_Pi#Banana_Pi_R1
Resource: http://www.bananapi.com/product/detail_3.html
Forum: http://www.bananapi.com/bbs/
Expert Support: firefly@ smartfire.cn Skype: smartfire_cn
Product Customization: firefly@ smartfire.cn
3. Banana Pi BPI-R1 Open Source Smart Router
Feature
CPU: A20 ARM CortexTM-A7 Dual-CoreGPU : ARM Mali400MP2Complies with OpenGL ES 2.0/1.1
Memory: (SDRAM) 1GB DDR3 (shared with GPU)
Micro SD (Max. 64GB) card slot UP to 2T on 2.5 SATA disk
10/100/1000 Ethernet RJ45, WLAN @802.11b/g/n
Description
What is BPi-R1Today, your router is running 7x24 for only one thing. What if it can do more? What if it can behave as a computer? BPi-R1 is the answer. It makes the router smarter. It is a new generation router that can simply replaces your current legacy one, and all of sudden, you can do much more with the router. You can develop, install Apps, play media, adding storage to the router, just like you do on any other computers, and you can catch and analyze traffic. This totally changes the way router works by turning a router to a computer.
The BPI- R1 is a 300Mbps Wireless N Router with both wired and wireless network connections designed specifically for smart home networking use. With 2T2R MIMO Technology and two detachable antennas, the R1 is the dual core Android 4.2 product which more better than Linux product. It can run with Android 4.2.2 smoothly and with Gigabit ethernet port, SATA Socket, it can easily run with the game and support 1080P high definition video output.
Hardware specification:
CPU: A20 ARM CortexTM-A7 Dual-Core
GPU: ARM Mali400MP2Complies with OpenGL ES 2.0/1.1
Memory (SDRAM):1GB DDR3 (shared with GPU)
Onboard Storage:Micro SD (Max. 64GB) card slot UP to 2T on 2.5 SATA disk
Onboard Network:10/100/1000 Ethernet RJ45, WLAN @802.11b/g/n
Video Input:A CSI input connector allows for the connection of a designed camera module
Video Outputs: HDMI , LVDS/RGB
Audio Output:3.5 mm Jack and HDMI
Audio Input:Microphone
Power Source:5 volt via Micro USB(DC In Only)
USB 2.0 Ports:USB Host and Micro USB (OTG) USB Host
Buttons:
Reset button: Next to Power button
Power button: Next to Battery connector
GPIO(2X13) pin: GPIO,UART,I2C bus ,SPI bus with two chip selects,
CAN bus,ADC,PWM,+3.3v,+5v,ground
LED: Power Key & RJ45
Remote:IR
OS: Android 4.2, Linux
4. Banana PI BPI-R1, Merom 1.0GHz CPU./1 GB DDR3 /Mali-400 MP2 with Open GL ES 2.0/1.1./4X Gigabit LAN 1x Gigabit WAN
Description
Banana PI BPI-R1, Merom 1.0GHz CPU./1 GB DDR3 /Mali-400 MP2 with Open GL ES 2.0/1.1./4x Gigabit LAN 1x Gigabit WAN5. DIY Kits Original BPI-R1 Intelligent Router SATA Interface for Banana Pi
Description
Original BPI-R1 Intelligent Router SATA Interface For Banana PiIntroduce:
The BPI- R1 is a 300Mbps Wireless N Router with both wired and wireless network connections designed specifically for smart home networking use. With 2T2R MIMO Technology and two detachable antennas, the R1 is the dual core Android 4.2 product which more better than Linux product. It can run with Android V4.2.2 smoothly and with Gigabit ethernet port, SATA Socket, it can easily run with the game and support 1080P high definition video output
Specifications:
CPU | A20 ARM Cortex-A7 Dual-Core
GPU | ARM Mali400MP2 Complies with OpenGL ES 2.0/1.1
Memory (SDRAM) | 1GB DDR3 (shared with GPU)
Onboard Storage | Micro SD (Max. 64GB) card slot, UP to 2T on 2.5 SATA disk
Onboard Network | 10/100/1000 Ethernet RJ45, WLAN @802.11b/g/n
Video Input | A CSI input connector allows for the connection of a designed camera module
Video Output | HDMI, LVDS / RGB
Audio Output | 3.5 mm Jack and HDMI
Audio Input | Microphone
Power Source | 5 volt via Micro USB (DC In Only)
USB 2.0 Ports | USB Host and Micro USB (OTG)
Buttons | Reset button | Next to Power button
Power button | Next to Battery connector
GPIO(2X13) pin | GPIO, UART, I2C bus, SPI bus with two chip selects, CAN bus, ADC, PWM, +3.3V, +5V, ground
LED | Power Key & RJ45
Remote | IR
OS | Android 4.2, Linux
Product size | 148 100mm
Weight | 83g
GPIO Define:
We can check R1 PIN definition in this thread, including CON1, CON2, CON3,J12 and J13.
J13 contains the default serial port UART0 (UART0-RX,UART0-TX). UATR0 is configured to be used for console input/output. Whilst this is useful if you want to login using the serial port. So it is the most
common used PIN.
J12 also contains serial port.
CON3 contains CAN bus, SPI bus, PWM, serial port and etc. It can be configured to be used for kinds of peripherals.
CON1 is a CSI camer
6. BPI-R1 Open-Source Smart Router Dual-core A20 ARM Cortex-A7 300Mbps Wireless Smart Home Networking
Feature
The BPI-R1 is a router based Banana Pi running on the same SoC as the M1 Classic Pi.Dual-core 1.0GHz CPU. 1 GB DDR3 memeory.
4x Gigabit LAN 1x Gigabit WAN
On board microphone
Description
The BPI-R1 is a router based Banana Pi running on the same SoC as the M1 Classic Pi.The R1 is a open hardware router that can run on a variety of open source operating systems including OpenWrt, Android, and Bananian. The R1 has slim router form factor with a bay for 2.5" HDDs. It also has 4 Gigabit LAN ports, 1 Gigabit WAN, and 300Mbs wireless N capabilities. .
Banana Pi is an open platform device, it is for anyone who wants to play and build with developer technology instead of simply using consumer technology. Backed by our community, starting a project and building servers is fun and rewarding. We welcome all companies, DIYers, and tech loving people within our community! Together, we can make a difference, we can discover our passions, inspire others, and build a practical project..
Features:.
Dual-core 1.0GHz CPU..
1 GB DDR3 memeory..
Mali-400 MP2 with Open GL ES 2.0/1.1.
4x Gigabit LAN 1x Gigabit WAN
On board microphone
Power Source:Micro USB, optional 5V DC port (center positive 1,6 x 4,4mm)
SuOS:Android, Raspbian, Ubuntu, OpenSUSE, Debian, Bananian
Dimensions:92mm x 60mm
Weight:52g
7. Doradus Original BPI-R1 Intelligent Router SATA Interface For Banana Pi
Feature
Original BPI-R1 IntelligentRouter SATA Interface
Electronics
Please Allow 7-23 Business Days For Delivery
Package Contains One Item