When you want to find amp meter fluke, you may need to consider between many choices. Finding the best amp meter fluke is not an easy task. In this post, we create a very short list about top 9 the best amp meter fluke for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 9 amp meter fluke:
Reviews
1. Fluke I410-KIT AC/DC Current Clamp Kit with Carry Case, 600V Voltage, 400A AC/DC Current
Feature
Kit includes i410 1-400A AC rms, 1-400A DC current Clamp, zippered vinyl carry case with moveable dividerSpecial value kit for electrical professional who is looking to add on DC and AC current measurement capabilities to their DMM
Includes a roomy carry case to hold and protect your meter and current clamp, plus extra storage for your test leads, probes and manuals
1mV/Amp output guarantees easy reading on your meter
Take accurate current readings without breaking the circuit
Description
Kit includes i410 1-400A AC rms, 1-400A DC current Clamp, zippered vinyl carry case with moveable divider. Special value kit for electrical professional who is looking to add on DC and AC current measurement capabilities to their DMM. Includes a roomy carry case to hold and protect your meter and current clamp, plus extra storage for your test leads, probes and manuals. The Fluke i410 AC/DC 400 Amp current clamp meets CAT III 600V safety ratings and can take accurate current readings without breaking the circuit. Fluke current clamps are the ideal tools to extend the current ranges of Fluke tools. Battery-powered hall-effect probe measures 1A to 400A. 1mV/Amp output guarantees easy reading on your meter. Take accurate current readings without breaking the circuit. Maximum conductor diameter 32mm. One year warranty. Measurement type: Hall sensor. Nominal current range: 400A, AC/DC. Continuous current range: 1A - 400A AC/DC. Maximum non-destructive current: 400A. Lowest measurable current: 0.5A. Basic accuracy: 3.5 percent + 0.5A (percent reading + floorspec). Useable frequency: DC - 3 kHz. Output levels: 1 mV/A. Zero error adjustment. Maximum voltage: 600V. Battery life: 9 V, 60 H. Maximum conductor diameter: 30mm, 2 x 25mm. Output cable length: 1.6m. With shrouded banana plugs.2. Fluke 117/323 KIT Multimeter and Clamp Meter Combo Kit
Feature
The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps.The 117 multimeter features true-rms for accurate measurements on non-linear loads.
The 323 clamp meter provides a true RMS sensing mete that provides accurate readings when measuring linear or non-linear loads, regardless of waveform
Description
The Fluke 117/323 KIT Multimeter, 117 Digital Multimeter/323 TrueRMS Clamp Meter Electrician's Combo Meter Kit Fluke 117/323 KIT Fluke Multimeter, 117 Digital Multimeter/323 TrueRMS Clamp Meter Electrician's Combo Meter Kit pairs the Fluke 117 multimeter with a Fluke 323 clamp meter for productive and effective troubleshooting in one total solution, including the new C115 durable soft carrying case for protection and easy meter transportation. Replaces: Fluke 117/322 KIT3. Fluke 116 HVAC Multimeter
Feature
Built in thermometer for HVAC applicationsMicroamps to test flame sensors
LoZ: helps prevent false readings due to ghost voltage
Large white LED backlight to work in poorly lit areas
Resistance, continuity, frequency and capacitance
Description
For the complete solution to HVAC troubleshooting the extra value-packed HVAC Technician's Combo Kit, provides the ability to troubleshoot and solve problems more efficiently by providing all the needed accessories an HVAC professional would need in a compact carry case.4. Fluke 324 40/400A AC, 600V AC/DC True-RMS Clamp Meter with Temperature, Capacitance Measurements
Feature
Digital clamp meter measures AC current to 400 amp, AC and DC voltage to 600V, and resistance to 4 kilohmsTrue RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
Jaw opening measures current in a conductor up to 30mm without touching or interrupting the circuit
Audible continuity sensor confirms that the circuit conducts electricity
Meets IEC safety standard 61010-1, and is rated for CAT IV installations to 300V and CAT III installations to 600V
Slim, ergonomic design
Large, easy to read backlight display
CAT IV 300V/CAT III 600 Volt safety rating
Hold button
Temperature and capacitance measurement
Description
The Fluke true-rms clamp meter is a great clamp meter for general, grab-and-go troubleshooting needs. The Fluke 323 323-AMZN is ideally suited for current measurements up to 400 a in tight cable compartments.5. Fluke 323 True-RMS Clamp Meter
Feature
Digital clamp meter measures AC current to 400 amp, AC and DC voltage to 600V, and resistance to 4 kilohms. Does not measure DC currentTrue RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
Jaw opening measures current in a conductor up to 30mm without touching or interrupting the circuit
Audible continuity sensor confirms that the circuit conducts electricity
Meets IEC safety standard 61010-1, and is rated for CAT IV installations to 300V and CAT III installations to 600V
Description
The Fluke true-rms clamp meter is a great clamp meter for general, grab-and-go troubleshooting needs. The Fluke 323 323-AMZN is ideally suited for current measurements up to 400 a in tight cable compartments.6. Fluke i400 400 Amp AC Current Clamp
Feature
Companion to a digital multimeters to measure up to 200A AC1mA per amp output guarantees easy reading on you meter
Take accurate current readings without breaking the circuit
Maximum conductor diameter 20mm, CAT III 600V safety rating
Companion to your DMM to measure up to 400 A AC
1mA/Amp output guarantees easy reading on you meter
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a very compact shape
Soft non-slippery overmold handle prevents from accidental touching live wiring
Description
Fluke Current clamps are the ideal tools to extend the current ranges of Multimeters. The clamp is a single range ac current clamp with current output via safety shrouded banana plugs. The clamp is compatible with most Fluke multimeters or any other current measurement device that accepts shrouded banana plugs. 1mA per Amp output guarantees easy reading on you meter. Take accurate current readings without breaking the circuit.7. Fluke I1010 AC/DC Current Clamp for DMM's, 600V Voltage, 600A AC, 1000A DC Current
Feature
Current clamps are the ideal tools to extend the current ranges of Fluke toolsBattery-powered hall-effect probe measures 1 A to 1000 A
1mV/Amp output guarantees easy reading on your meter
Take accurate current readings without breaking the circuit
1 year warranty
Description
The Fluke i1010 AC/DC current clamp is designed to extend the current ranges of Fluke tools and can take current readings without breaking the circuit. Battery-powered dual Hall-effect, clamp-on probe measures dc current from 1-1000A; AC current from 1-600A AC rms. Measures AC and DC current down to 1 amp with specified accuracy and is useable to 0.5A. Output is 1 mV per amp DC or AC. Jaws accept conductor size of 1 X 750 MCM ( 30 mm/1.18 in. diameter) or 2 x 500 MCM (2 x 25 mm/0.98"). AC and DC accuracy: +/- (2.0 percent of reading + 0.5A). Measurement type: Hall sensor. Nominal current range: 600 A AC, 1000 A DC. Continuous current range: 1 A - 600 A AC, 1 A - 1000 A DC. Maximum non-destructive current: 1000 A. Lowest measurable current: 0.5 A. Useable frequency: DC - 10 kHz. Output levels: 1 mV/A. With zero error adjustment. Safety: CAT III, 600 V. Maximum voltage: 600 V. Battery life: 9 V, 60 h. Maximum conductor diameter: 30mm, 2 x 25mm. Output cable length: 1.6m. With shrouded banana plugs.8. Fluke FLK-VT04-ELEC-KIT Electrical Kit for Visual Infrared Thermometer, Includes IR Thermometer, Digital Multimeter, and True-RMS Clamp Meter
Feature
Electrical kit includes Fluke VT04 visual infrared thermometer, Model 117 digital multimeter, and Model 376 clamp meter to troubleshoot electrical, HVAC/R, and automotive applicationsVT04 visual infrared thermometer has a built-in digital camera, hi-low temperature alarms, time-lapse image capture and a measurement range of 14 to 482 degrees F (-10 to +250 degrees C)
Model 117 dual-impedance digital multimeter measures true RMS AC amp and volts, DC amp and volts, continuity, ohms, capacitance, low impedance (LoZ) capacitance, and hertz
Model 376 true RMS clamp meter measures AC current and voltage, DC current and voltage, resistance, frequency, capacitance, and continuity
Meters meet industry standards for safety compliances
Description
The Fluke FLK-VT04-ELEC-KIT electrical kit includes a Fluke VT04 visual infrared thermometer, a Model 117 digital multimeter, and a Model 376 clamp meter. The VT04 visual infrared thermometer has a built-in digital camera, hi-low temperature alarms, time-lapse image capture and a measurement range of 14 to 482 degrees F (-10 to +250 degrees C). The thermal heat map has five levels of overlay that enable the operator to locate precisely the area of concern. The built-in digital camera takes time-lapse images and saves up to 10,000 images per gigabyte on a removable micro SD data card (4 GB card included). Images can be exported for long-term records retention or inclusion in reports using the included SmartView analysis and reporting software.
The Fluke Model 117 dual-impedance digital multimeter measures true RMS- AC amps and volts, DC amps and volts, continuity, ohms, capacitance, low impedance (LoZ) capacitance, and hertz. The meter has automatic AC/DC volt selection, true RMS AC measurements for accurate measurements on non-linear loads, and minimum, maximum, and average data for recording signal fluctuations. The meter also performs a diode test and measures resistance, continuity, frequency, and capacitance. Low impedance (LoZ) measurements deliver a low impedance input to the circuit, eliminating ghost voltages and improving accuracy. The white backlit LED is suitable for use in low lighting. Non-contact voltage detection speeds measurements. The meter includes test leads, holster, one 9V battery, and instructions.
The Fluke 376 true RMS AC/DC clamp meter measures 1,000 amp AC and DC current with the fixed jaw or 2,500 amp AC current with the flexible current probe. True RMS AC voltage and current measurements provide accurate readings on non-linear signals. The iFlex flexible current probe increases the measurement range to 2,500 amp AC and measures awkward-size conductors or in hard-to-reach areas. An integrated low-pass filter and signal processing provide stable readings in noisy electrical environments. Minimum, maximum, and average readings capture signal fluctuations. Inrush measurement technology filters out noise and captures the motor starting current as seen by the circuit protection. The meter has a CAT IV 600V, CAT III 1,000V safety rating. The meter includes an 18-inch iFlex probe, test leads, a soft carrying case, and instructions.
| VT04 IR Thermometer Specifications | |
|---|---|
| Detector type | Uncooled pyroelectric ceramic |
| Thermal sensitivity (NETD) | < or = 250mK |
| Field of view | 28 x 28 degrees |
| Image Palettes | Hot Metal, Ironbow, Rainbow, Rainbow High Contrast, Grayscale (white hot) and Grayscale (black hot) |
| Temperature range | 14 to 482 degrees F (-10 to +250 degrees C) |
| Image file format | .is2 format saved to SD card; user can create professional reports or export images using supplied software (BMP, DIB, GIF, SPE, FIF, SPEG, JPG, PNG, TIF and TIFF) |
| Safety compliances | CFR47: 2009 Class A. Part 15 subpart B; CE: EN 61326:2006; IEC/EN 61010-1:2010 Pollution Degree 2, 2 m drop |
| Computer interface | Micro USB connector |
| Power | Rechargeable Li-ion battery, 3.6V, 2250 mAh, 8.1 Wh; 8 hour life |
| Dimensions (H x W x D) | 8.3 x 3 x 2.2 inches/21 x 7.5 x 5.5 cm |
| Weight | 10.5 oz./300 g |
| 117 Multitester Specifications | |
|---|---|
| Maximum voltage between any terminal and earth ground | 600V |
| DC millivolts range and resolution | 600.mV range with 0.1mV resolution |
| DC volts range and resolution | 6.000V range with 0.001V resolution; 60.00V range with 0.01V resolution; 600.00V range with 0.1V resolution |
| AC millivolts (true RMS) range and resolution | 600.0mV resolution with 0.1mV resolution |
| AC volts (true RMS) range and resolution | 6.000V range with 0.001V resolution; 60.00V range with 0.01V resolution; 600.0V range with 0.1V resolution |
| Continuity range and resolution | 600 ohms range with 1 ohm resolution |
| Ohms range | up to 600.0 ohms |
| Diode test | 2.000V |
| Capacitance | 1000 nanofarads to 1000 microfarads |
| LoZ capacitance | 1 nanofarads to 500 microfarads |
| Certifications | UL, CSA, TUV, N10140 , VDE, IP42 |
| Safety compliances | ANSI/ISA 82.02.01 (61010-1) 2004; CAN/CSA C22.2 No 61010-1-04; UL 6101B (2003); EMC EN61326-1; and IEC/EN 61010-1 2nd Edition for measurement Category III, 600 V, Pollution Degree 2 |
| 376 Clamp Meter Specifications | |
|---|---|
| AC/DC current measurement (fixed jaw) | 1,000 amp |
| AC/DC current measurement (iFlex current probe) | 2,500 amp AC |
| AC/DC voltage | 1,000V |
| Frequency (jaw and iFlex) | Up to 500Hz |
| Resistance with continuity detection | 60 kilohms |
| DC millivolt | 500mV |
| Capacitance | 1,000 microfarads |
| Other tests | Continuity |
| Data types | Minimum, maximum, and average |
| Display | Backlit LCD |
| Wire capacity | 750 MCM or 2-500 MCM |
| Safety rating | CAT III 1000V, CAT IV 600V |
*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Digital thermometers are instruments used to measure the temperature of air, liquids, or surfaces electronically. They may measure temperature in Celsius, Fahrenheit, or both. Most digital thermometers use thermistors, which are small electronic resistors. Thermistors are made out of metals that conduct electricity within a certain range and become more conductive the warmer they get. A microcontroller inside the thermometer measures this electrical conductivity and converts it to a temperature, which is displayed on an LCD. Digital thermometers are used in a wide range of applications, including in laboratory settings, food service and storage, and in doctors' offices and hospitals.
Multimeters are electrical test meters that measure multiple properties of an electrical circuit, such as current, voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, multimeters diagnose electrical problems in electrical equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Multimeters display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltage. Safety ratings are based on International Electrotechnical Commission (IEC) standards for low-voltage test equipment. IEC 61010 delineates four overvoltage installation categories. In general, a meter with a category IV rating will provide more protection against transient voltages than a meter with a lower category rating.
Clamp meters, also called clamp-on meters, have two jaws that fit around a conductor to measure electrical current without cutting through wires, or touching or interrupting the electrical circuit. Available in handheld or benchtop models, clamp meters diagnose problems in electrical equipment, wiring, and power supplies. All clamp meters test for current. Some come with test leads and inputs for measuring voltage, capacitance, and resistance. They display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltage. Safety ratings are based on International Electrotechnical Commission (IEC) standards for low-voltage test equipment. IEC 61010 delineates four overvoltage installation categories. In general, a meter with a category IV rating will provide more protection against transient voltages than a meter with a lower category rating.
Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.
What's in the Box?
- Model VT04 visual IR thermometer
- Model 117 electrician's digital multimeter
- Model 376 AC/DC true RMS clamp meter
- Micro-SD card and conversion adapter
- 4 mm silicone test lead set
- 18" iFlex flexible current probe for the 376 clamp meter
- Li-Ion battery for VT04 visual IR thermometer
- (2) alkaline batteries for the 376 clamp meter
- Micro USB charger/power supply with worldwide adapters for VT04 visual IR thermometer
- SmartView analysis and reporting software CD for VT04 visual IR thermometer
- Lanyard
- Hard case for VT04 visual IR thermometer
- Holster for 117 digital multimeter
- Soft case for 376 clamp meter
- Multilanguage instruction CD
- Instructions
9. Amprobe AMP-25 TRMS Mini Clamp
Feature
True-RMS for noisy environments provides accuracy and dependabilityAC & DC current to 300 A (10mA resolution)
Low pass filter for variable frequency drives
Inrush current for motor start-up monitoring
Non-contact voltage detection (NCV)