If you looking for heat exchanger heat pump then you are right place. We are searching for the best heat exchanger heat pump on the market and analyze these products to provide you the best choice.
Reviews
1. BXQINLENX 600L/H 19W DC12V CPU Cooling Heat Exchanger Water Pump Tank 186 ml CO2 Cooler
Feature
158.5 GPH (600L/H) 19W, perfect for CPU cooling system.Threaded connections: G 1/4" input and G 1/4" output.
Head: max 5 Meter, Working life: 50000 hours
Water tank capacity: 186 ml,
100% brand new and Three month warranty.
Description
LENX 600L/H 19W DC12V CPU Cooling Heat Exchanger Water Pump Tank 186 ml CO2 CoolerFeatures :
Power consumption:19W
Rated voltage: DC 12V
Rated current: --------
Max flow rate: 600L/H (158.5GPH)
Max static head: 5m (16.4FT)
Diameter of inlet: G 1/4"
Diameter of outlet: G 1/4"
Lifespan: More than 50,000hrs
Power supply: DC electric source
Ceramic shaft + ceramic bushing
Speed:--------
The Water Tank Size:length 160 MM, diameter 50MM.
NOTE:
1. Working at rated voltage (DC12V).
2. This pump is centrifugal pump, it can't vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)
3. When blocking, long-running is not allowed.
4. Preventing any hard particles entering the pumps.
5. Ceramic bearing, graphite sleeve, very quiet, when using anhydrous idling is forbidden
Package:
1 X Water pump
1 X Water Tank
2 X G 1/4" TO 5/16"
1 X Water Block
1 X G 1/4" TO G 1/4"
2 X Stents
6 X Screws
2. Taco 0015-MSF2-IFC 3-Speed Circulator, Cast Iron
Feature
3-Speed versatilityHighest performance and starting torque in class
Heavy duty construction for longer life
Removable high-flow integral flow check (IFC)
Replaceable cartridge design
Description
The rugged 0015 3-Speed Pump is specifically designed to provide dial-in precision to meet the requirements of any hydronic heating system, including radiant and higher head systems. In radiant applications, for example, its 3-Speed switching capability gives you the fine tuning control to match a wide combination of tube diameters and length of runs. The 0015 3-Speed Pump is a direct replacement for the Grundfos UPS 15-58 3-Speed. The 0015 delivers the highest starting torque in its class and a removable, high-flow Integral Flow Check (IFC) that prevents gravity flow, reduces installation costs and improves pump performance. The stainless steel 0015 is ideal for high performance in domestic hot water applications.3. WiseWater Circulation/Circulating Pump with Internal Threaded Flanges - Up to 19.7 Feet Head Range, 3 Speed Switchable for Hydronic Radiant Heating and Plumbing
Feature
Hot or cold water circulation, up to 19.7 feet head, 18 GPM, 3-speed switchable2 pole, single phase, 115 volt motor, switchable at 100/70/55 watts, low electricity usage.
Cast iron body with 3 feet power cord plug, 3 year warranty
1" FPT internal threaded flanges are easy for your maintenance and replacement.
Multi-applications on residential and commercial hydronic radiant heating and plumbing
Description
About The ProductA heating circulation pump is used to speed up the heating process and circulation of domestic water. A circulation pump can be fitted to a hot water tank, manifold, swimming pool heating side, sidearm heat exchanger, and other parts of the heating system to help circulate the water in the house. Our product comes with three speed options, allowing you to regulate the output to precisely match the requirement of the application. Our product, featuring a self-lubricating wet rotor design, operates whisper-quiet and maintenance-free. This listing is for the pump (with gaskets), flanges and bolts are included.
Working Condition:
Rated at 115V 60Hz single phase AC
Pressure of system < 1.0MPa
Pressure of water inlet > 0.1 MPa
Pumped liquid shouldn't include solid impurities exceeding 0.2mm
For indoor use only
Not for submersible use
Do not run pump dry
Use copper conductors only
Do not install the motor part above or below the pump body
Specifications
Model: GPD15-6SF
Phase: 1
Capacitance: 10F
Voltage: 115 (60Hz)
Input Power (High/Med./Low; Watts): 100 / 70 / 55
Rated Current (High/Med./Low; Amps.): 0.9 / 0.7 / 0.5
Head Range: 0 - 18.7'
Maximum Temperature: 230F
Maximum Pressure: 145psi
Port Size: 1" NPT
Materials: Cast Iron
Dimensions, Weight: 7.5" x 7.5" x 6", 8.9 lb
Applications
Residential and Commercial Applications
Hydronic Radiant Heating
Domestic Water Heating
Forced Air Heating
Floor Heating
Snow Melting
Solar Hot Water Heating
Plumbing
4. Hayward HP21404T HeatPro Titanium 140,000 BTU Heat Pump, Square
Feature
Acoustic compressor cover and profiled fan blade ensures quiet operation and efficient performanceUltra-Gold corrosion resistant evaporator fin for extreme durability
Titanium heat exchanger designed for maximum heat transfer, efficiency and reliability
Durable injection molded UV-resistant body panels that are impervious to rust and deterioration
Description
Hayward Heat Pro heat pumps incorporate titanium counter-flow heat exchangers for unrivaled and uncompromising performance - even under the harshest conditions. Other key features include: heavy-duty, super-quiet scroll compressors; durable injection-molded UV-resistant body panels that are impervious to rust and deterioration; stainless steel hardware; and a polyethylene screen to protect the evaporator coil from damage. Plus, Hayward HeatPro heat pumps are lightweight, compact and easy to install or service, making them ideal for both new pools and spas and existing system upgrades.5. Side Arm Heat Exchanger 33" Stainless Steel 3/4" NPT 1" 19,000Btu/hr for Outdoor Wood Furnace
Feature
19kBTU CAPACITY FOR 40 GALLON WATER TANK: At 19,000 Btu/hr, this product will help heat the water in a 40gal. tank.33" LENGTH; TWO PORT SIZES: 3/4" NPT (Water Heater side) and 1" NPT (System side)
SINGLE WALL, FIN-ENHANCED TUBE: The fins in this heat exchanger produce turbulence to increase water heating efficiency.
FREE 1.5-YEAR WARRANTY: Our product comes with a 1.5-year warranty to cover manufacturer defects.
MANY WATER HEATING APPLICATIONS: These can be used for Domestic Hot Water Heating, Outdoor Wood Furnaces, Solar Hot Water Heating, Residential Plumbing
Description
With innovative thermosiphon technology and a fin-enhanced tube, our product works well alongside an indirect water heater to help heat the water in the tank.This product provides a larger capacity and a faster heating rate using a shorter unit compared to a typical copper version. The fin-enhanced design also helps prevent cross contamination in potable water. With thermosiphon technology circulating the domestic hot water, using a circulation pump with this product can greatly increases the heat recovery by 3 to 4 times.
Product Information and Specifications
Port Size: 3/4" NPT (DHW side), 1" NPT (System side)
Works with (Tank size): 40gal.
Capacity: 19,000 Btu
Heat Transfer: 3.16ft2
Heat Recovery: 3.4 hrs.
Min. Working Temperature: 18F
Max. Working Temperature: 406F
Design Pressure: 150psi
Test Pressure: 225psi
C-C distance: 28.3"
Materials: Stainless Steel 304
Dimensions, Weight: 33.1" x 2", 5.8lb
Applications
Used with conventional boiler, outdoor wood furnace or a solar water heater
Domestic Hot Water Heating
Solar Hot Water Heating
Residential Plumbing
6. OUTDOOR WOOD FURNACE BOILER PUMP FLANGE SET 1' BRONZE LEAD FREE NFS 372 W/BLEED
Feature
1 Set, Lead FreeHelp prevent air pockets from damaging your pump
1" - Perfect for Outdoor Wood Boilers Applications
May be used to fill your wood boiler
Description
1 inch lead free flange set includes 1 shut-off flange and 1 flange with built-in bleeder and drain. The number 1 problem with pumps going bad is air caught in the heat exchangers. With our flange set, you can hook up a hose to the flange and push all the air back to the stove. You can also fill the stove with this attachment as well. There is no better set up to solve your pump problems than with this flange set! These are safe for potable water, and comes with 2 gaskets.7. Cooling Heat Water Pump of 500L/H DC 12V CPU CO2 Circular Exchanger Mute Pump Tank Cooler
Feature
MODE:500L/H DC12V 10W CPU Cooling Heat Exchanger Water Pump Circular Pump Tank Fast Cooler with Acrylic material.WORKING LIFE:This water pump works with 50000 hours life,you don't need to worry about if the product stop working suddenly.
Features:The capacity of 250 ml,used of Electronics,You can quickly connect the plug instead of the battery,and the threaded connections it'sG 1/4.
INCLUDING:1 x Water Cooling DC Pump Tank 250ML F CPU CO2 Heat Exchanger Water Cooler 500 L/H.
WARRANTY:In there,you are backed by our Performance Assurance.if you have any issues with your product,simply contact customer service for troubleshooting help,parts, replacement,or refund.
Description
Description:
Flow Rate:max 500L / H
Head:max 3 Meter
Power Connector:3pin connector
Voltage:DC12V
Power:10W
Noise:16 DB
Working life:50000 hours
Water tank capacity:250 ml
Threaded connections:G 1/4" DN8
Product Dimensions:Diameter 60mm X height 160mm
Package:
1 x Water Cooling DC Pump Tank 250ML F CPU CO2 Heat Exchanger Water Cooler 500 L/H
8. Nuova Simonelli Oscar II Espresso Machine
Feature
Dimensions (H x W x D): 16" x 12" x 16"Espresso Machine Type: Semi-Automatic
Voltage: 110
Water Source: Pour-Over
Description
The Oscar has all the necessary components here to create the perfect brewing environment for espresso. The brew group is made from a casting of marine grade brass which offers the industry's best heat conducting and corrosion resistant material. The engineers at Nuova built this brew group to allow the heat exchanger line from the boiler to passively recirculate so that it is always ready to brew. They also included the coveted 3-Way solenoid valve which not only prevents excessive pressure but also releases built-up pressure at the end of brewing to dry the espresso puck and keep it from dripping. Boiler Protection Features To ensure long life and protection against over heating and burnoutNuova Simonelli built the Oscar's boiler with a safety feature called Auto-Refill. This system keeps an eye on the water level in the boiler and when the level falls below a certain pointthe computer controlled water level system automatically adds more water. If the machine should run out of water and the Auto Fill system was unable to refill the boilerthe computer will automatically turn the machine off to prevent overheating and damage to the heating element. Durable Construction The Oscar's steel frame is protected by a hardened ABS plastic exterior that will withstand even commercial use. It may not have the look of stainless steelbut it will never corrode; it is easy to clean and scratch resistant; and it hides fingerprints and dirt that quickly show on stainless steel. Its drip tray comes with a punch-out disk for hooking up a direct drip tray drainage line. Also the drip tray can be flipped over to accommodate both small and large cups. On the top of the unityou can store up to 12 cups that will become warm from the radiant heat off the boiler. - Water tank 23 L Power - 1200 W. - weight 14 Kg. Size: 300 x 400h x 400mm9. Electrical Gadgets & Tools - 500L/H DC12V 10W CPU Cooling Heat Exchanger Water Pump Circular Pump Tank Fast Cooler
Feature
Package Includes: 1 x Pump | 2 x Barb fits 3/8 ID Tubing | 4 x screws and screw cap | Details pictures :500L/H DC12V 10W CPU Cooling Heat Exchanger Water Pump Circular Pump Tank Fast Cooler
Features:
Acrylic material, strong & durable.
Stable & quiet operation, strong power.
Description
Descriptions:500L/H DC12V 10W CPU Cooling Heat Exchanger Water Pump Circular Pump Tank Fast Cooler
Features:
Acrylic material, strong & durable.
Stable & quiet operation, strong power.
Specifications:
Item Name : Reservoir & Pump
Material : Acrylic
Weight : 401g
Power Connector : 3pin connector
Flow Rate : max 500L / H
Noise : 16 DB
Voltage : DC12V
Power : 10W
Working life : 50000 Hours
Water tank capacity : 250 ML
Size : 60 x 150mm
Color : Black
Ports : G1/4" thread
Line length : 45cm / 13.5inch
Package includes:
1 x Pump
2 x Barb fits 3/8 ID Tubing
4 x screws and screw cap
Details pictures :