When you looking for stepstick tmc2100, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable stepstick tmc2100 is not an easy task. In this post, we show you how to find the right stepstick tmc2100 along with our top-rated reviews. Please check out our suggestions to find the best stepstick tmc2100 for you.
Reviews
1. EEEKit 2-Pack TMC2100 TMC2130 Stepstick Stepper Motor Driver Module Board, with Heat Sink for 3D Printer
Feature
2A two-phase stepper motor single-phase current (peak 2.5A); adjustable motor operating current.Supports Step/DIR interface and SPI interface two control modes.
Combined maximum efficiency and optimum motor torque operation without noise.
256 subdivision. High accuracy no sensor motor load detection.
Reduce energy consumption by 75%. High load driver will not lost step.
Description
Package Includes:2 x TMC2130 Driver
2 x Heat Sink
2 x Screwdriver
Please note that EEEKit and Amazon.com are the only sellers on Amazon that are authorized to sell products with the EEEKit name. Buy from sellers EEEKit or Amazon.com to ensure authenticity and better service.
Product Description:
Motor input voltage range: 4.75 ~ 46V
Logical interface input voltage: 3 ~ 5V
Model: TMC2130
Interface: Step/Dir or SPI
Configuration: CFG Pins or SPI
Native Microsteps: up to 1/256
Motor Phase Current: 1.2A RMS, 2.5A Peak
Specification
VM always needed: enabled
RDSon: >=0.5 Ohm
stealthChop (quiet): yes spreadCycle: yes
coolStep: yes
stallGuard: yes
dcStep: yes
TMC2130 Driver Size: 0.79in x 0.59in x 0.43in / 20mm x 15mm x 11mm
Heat Sink Size: 0.47in x 0.5in x 0.35in / 12mm x 9mm x 9mm
Net weight: 0.1oz / 3g
2. SODIAL 1 set TMC2100 V1.3 Stepper Motors StepStick Mute Driver excellent silent stability protection for 3D Printer
Feature
High quality and Ultra-quiet. TMC2100 module adopts German imported chips. On the other hand, the price is much higher than other stepper drivers. But it still a very good choice for those users who have high requirement for the printer.The working temperature is high. Without fan, the working temperature is about 70 degree in 0.5A, and more than 150 degree in 1A, which may cause losing step. Recommend to do a good job of cooling, the best work current is 0.5A.
Working temperature is about 70oC at 0.5A, about 150oC at 1A. Dimensions: 2* 1.5* 1.2cm / 0.79* 0.59* 0.47 inch (Approx.);Heat Sink Dimension: 1.2* 0.9* 1.2cm/0.47* 0.35* 0.47 inch (Approx.). Application: 3D printing
And if you use the Lerdge motherboard, please set the direction directly in the setting page of direction of the motor. Algorithm and Adjustment of TMC 2100 Module Driving Current And the NOTES!
The drive current algorithm: i = vref * 1.9 / 2.5, the default Verf is about 0.65V, so the default current is 0.5A, and the maximum current 1A. Verf measures the voltage of Gnd and potentiometer middle.
Description
* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings.Our products will enhance your experience to unparalleled inspiration.SODIAL(R) 1 set TMC2100 V1.3 Stepper Motors StepStick Mute Driver excellent silent stability protection for 3D Printer
Color: White + Blue
Material: CCL
Use of the TMC2100 drive module:
1. When use in the Ramps1.4 or MKS Gen, or Lerdge touch screen motherboard, please remove the 3 jumper cap under the socket.
2. Please pay attention to direction.
3. The heat sink directly attached to the PCB.
4. The motor direction is opposite to that of A4988 and DRV8825, please adjust the firmware or adjust the motor wiring if you want to change to 4988.
Please DO NOT connect the motors when measuring the voltage, or it's easy to burn the drive.
Please connect the power supply when measuring voltage as well, do not connect only the USB power.
Please pay special attention to the direction, do not insert wrongly!!! Use of the TMC2100 drive module 1. When use in the Ramps1.4 or MKS Gen, or Lerdge touch screen motherboard, please remove the 3 jumper cap under the socket. 2. Please pay attention to direction. 3. TMC class chip fever easily,so please must attach heat sink,the heat sink directly attached to the PCB. 4. The motor direction is opposite to that of A4988 and DRV8825, please adjust the firmware or adjust the motor wiring if you want to change to 4988. And if you use the Lerdge motherboard, please set the direction directly in the setting page of direction of the motor.
Package contents:
5* TMC2100 Stepper Module
5* Heat Sink
1* Screw Driver
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
3. elinke 5PCS/LOT StepStick MKS TMC2100 driver ultra-silent excellent stability and protection superior performance
Description
5PCS/LOT StepStick MKS TMC2100 driver ultra-silent excellent stability and protection superior performance4. MagiDeal TMC2100 Stepper Motor StepStick Heat Sink For 3D Printer+3.5" Touch Screen
Feature
The motherboard uses a 32-bit coretx-M4 core control unit, which is robust and stable, and features a full-featured 3.5-inch full-color IPS LCD touch screen that brings simple, smooth operation.The motherboard uses an open interface to meet the needs of different customers.
The motherboard optimizes the connection of limit switches, as well as comprehensive line protection design.
The main board comes with a print pause, print save, and start-up continuation functions.
If you want to accidentally power off, power outage, save, and continue printing.
Description
You will find what you want in Sports & Outdoors, Home & Kitchen, Beauty, Clothing, Health & Household, Tools & Improvement, Automotive Parts etc.
Description:
- The motherboard uses a 32-bit coretx-M4 core control unit, which is robust and stable, and features a full-featured 3.5-inch full-color IPS LCD touch screen that brings simple, smooth operation.
- The motherboard uses an open interface to meet the needs of different customers.
- The motherboard optimizes the connection of limit switches, as well as comprehensive line protection design.
- The main board comes with a print pause, print save, and start-up continuation functions.
- If you want to accidentally power off, power outage, save, and continue printing.
- Print out the shutdown function, you need to equip a power supervision module.
- The motherboard defaults to offline printing (ie, TF card printing or U disk printing). If you need to connect online, please equip an online module.
- Motherboard U disk printing has USB2.0 and USB3.0 support.
Specification:
- Material: 4 layers PCB board
- Motherboard size: approx. 90x70mm/3.54x2.76inch
- Applicable scope: 3D printer
Package Includes:
1x motherboard
1x 3.5 inch display
4x white TMC2208 drivers
1x 30 cm FCC screen cable
1x 30 cm power cable
1x resistance pen
1 pack nylon screw nut
1x screwdriver
Note:
If the motherboard needs to use a hot bed, you need equip a hot bed adapter module and high power hot bed module.
5. TWP 3D Printer Parts MKS TMC2100 Stepstick Stepper Motor Driver Module with Heat Sink Ultra-silent Excellent Performance for 3D Printer Reprap
Feature
Model Number: TMC2100 Stepper Motor DriverColor: White
With heat sink: YES
Application: 3D printing
Segments: 256
Description
Shipping list(Per unit): TMC2100 Module * 1pc Heat sink * 1pc TMC2100 Motor Drive Pins Description Features: 1. High quality and Ultra-quiet. TMC2100 module adopts German imported chips. On the other hand, the price is much higher than other stepper drivers. But it still a very good choice for those users who have high requirement for the printer. 2. The working temperature is high. Without fan, the working temperature is about 70 degree in 0.5A, and more than 150 degree in 1A, which may cause losing step. Recommend to do a good job of cooling, the best work current is 0.5A. Algorithm and Adjustment of TMC 2100 Module Driving Current------And the NOTES! 1. The drive current algorithm: i = vref * 1.9 / 2.5, the default Verf is about 0.65V, so the default current is 0.5A, and the maximum current 1A. 2. Verf measures the voltage of Gnd and potentiometer middle. 3. Please DO NOT connect the motors when measuring the voltage, or it's easy to burn the drive. 4. Please connect the power supply when measuring voltage as well, do not connect only the USB power. 5. Please pay special attention to the direction, do not insert wrongly!!! Use of the TMC2100 drive module 1. When use in the Ramps1.4 or MKS Gen, or Lerdge touch screen motherboard, please remove the 3 jumper cap under the socket. 2. Please pay attention to direction. 3. The heat sink directly attached to the PCB. 4. The motor direction is opposite to that of A4988 and DRV8825, please adjust the firmware or adjust the motor wiring if you want to change to 4988. And if you use the Lerdge motherboard, please set the direction directly in the setting page of direction of the motor.6. 3D Printer Motherboard Accessories, FYSETC Silent Stepper Motor Driver Parts Protects Away Grain Filter Jutter Elimination for 3D Printer A4988 LV8729 DRV8825 TMC2100 TMC2208 TMC2130 Driver - 5 Pcs
Feature
MKS Stepstick Device: mainly used for reduced the chatter marks generated when a 3D printer is printing with a parallel arm structure.Especially a motor with a 8825 drive and a relatively low resistance is more effective, and can effectively eliminate uneven signal waves at low speeds, thereby achieving Relatively flat signal wave.
Also, the effect is most obvious with the DRV8825 powered Delta 24V model.
After Sales Warranty: each one desfective item can have the replace or return, need more help please feel free to contact us, we will try our best to service.
Description
Apply to 3D printer kossel Rostock Duplicator Pursa i3 Ultimaker Lulzbot Tevo CR-10 and others, this product mainly protects the stepper motor drive, especially the DRV8825 TMC2100 TMC2130 TMC2208 drive! !When using the drive inserted in the device can be eliminated!
Feature
Material: tin filling
Size: 20 x15 x 2mm
Package includes:
5 x Stepstick Device
7. UKCOCO TMC2100 V1.0 Stepper Motor Mute Stepstick Driver Controller Silent Excellent Stability Protection with Heat Sink for 3D Printer Parts MakerBot
Feature
Adopts imported chips, high quality and ultra-quiet.Cooling method is required as its working temperature is pretty high.
Do not connect the motors or power supply when measuring voltage as it may damage the driver.
Exclusive designed for MakerBot.
Material: Plastic and metal, Size: 1.5 x 1.4 x 1.3cm
Description
DescriptionThis item is a TMC2100 V1.0 stepper motor driver.
It adopts imported chips, high quality and ultra-quiet.
It is a good replacement stepper motor for MakerBot.
Features
- Material: Plastic and metal
- Size: 1.5 x 1.4 x 1.3cm
- Suggested working current: 0.5A
- Adopts imported chips, high quality and ultra-quiet.
- Cooling method is required as its working temperature is pretty high.
- Do not connect the motors or power supply when measuring voltage as it may damage the driver.
Package Including
1 x Stepper Motor
1 x Heat Sink
1 x Screwdriver
8. TMC2100 StepStick Stepper Motor Driver Board Ultra-quiet Mute Drive with Heat Sink for Reprap 3D Printer
Feature
Most advanced mute stepper module, best choice to replace your A4988 or DRV8825 steppers.Equipped with a special designed heat sink to highly improve the heat dissipation.
TMC2100 module adopts the most advanced chip to improve the function of the stepper which also makes the stepper can work silently.
The calculation method of driver current: i = Vref * 1.9 / 2.5
Default Vref is 0.65V, Default Current is 0.5A, max current is 1A.
Description
Features:Most advanced mute stepper module, best choice to replace your A4988 or DRV8825 steppers.
Equipped with a special designed heat sink to highly improve the heat dissipation.
TMC2100 module adopts the most advanced chip to improve the function of the stepper which also makes the stepper can work silently.
Specifications:
Type: MKS TMC2100
Dimension: 1.5 x 2mm
The calculation method of driver current: i = Vref * 1.9 / 2.5
Default Vref is 0.65V, Default Current is 0.5A, max current is 1A.
Instructions:
1. When use in the Ramps1.4 or MKS Gen, or Lerdge touch screen motherboard, please remove the 3 jumper cap under the socket.
2. Directly stick the heat sink on the PCB.
3. The motor direction is opposite to that of A4988 and DRV8825, please adjust the firmware or motor wiring if you need to replace to A4988 or DRV8825.
Notes:
1. Please DO NOT connect the motors when measuring the voltage, or it's easy to burn the drive.
2. Please connect with both the power supply and USB Power when measuring voltage.
3. Please pay attention to the direction, do not insert reversely.
4. The working temperature might be high without fan. The working temperature is about 70C when working current is around 0.5A, and over 150C when working current is around 1A , which may cause losing step. In order to let the stepper work better, please keep the working current around 0.5A.
Package Includes:
1 x TMC2100 Stepper Module
1 x Heat Sink with Sticker
9. TWP 3D Printer Parts 5PCS MKS TMC2100 Stepstick Stepper Motor Driver Module with Heat Sink Ultra-silent Excellent Performance for 3D Printer Reprap
Feature
Model Number: TMC2100 Stepper Motor DriverColor: White
With heat sink: YES
Application: 3D printing
Segments: 256