When you looking for racerstar flight controller, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable racerstar flight controller is not an easy task. In this post, we show you how to find the right racerstar flight controller along with our top-rated reviews. Please check out our suggestions to find the best racerstar flight controller for you.
Reviews
1. Matek AIO F4 FC Flight Controller + PDB + Bateflight OSD + BEC for FPV Racing RC Drone Quadcopter
Feature
MCU: STM32F405(168MhZ). IMU: 32K ICM20602 accelerometer/gyro (SPI); Blackbox: MicroSD card slot (SD/SDHC); VCP, UART1, UART2, UART3, UART4, UART5OSD: BetaFlight OSD w/ AT7456E chip; PDB Input:9-27V (36S LiPo) w/TVS protection,4x30A (Max.4x50A); Dual BEC: 5V 2A 9V 2A
Supplied by MATEKSYSTEM, all of our product is original Matek product, high quality !
More specification: http://www.mateksys.com/?portfolio=f405-ctr
Me: If you use the SD BlackBox and get some issues. Pls type "set sdcard_dma = off" in CLI, Type"Save".It is an open issue https://github.com/betaflight/betaflight/issues/2631
Description
Matek AIO F4 FC Flight Controller + PDB + Bateflight OSD + BEC for FPV Racing RC Drone QuadcopterFC Specification:
MCU: 168MHz STM32F405
IMU: 32K ICM20602 accelerometer/gyro (SPI)
Max. 32K Gyro update andamp; 16K PID Loop
OSD: BetaFlight OSD w/ AT7456E chip
Blackbox: MicroSD card slot (SD/SDHC)
VCP, UART1, UART2, UART3, UART4, UART5
Built in inverter for SBUS input (UART2-RX)
PPM/UART Shared: UART2-RX
SoftSerial on S5 andamp; S6 optional
Smartaudio andamp; Tramp VTX protocol supported
Spektrum BIND_PIN: RX4
WS2812 Led Strip : Yes
Beeper : Yes
RSSI: Yes
PDB Specifications:
Input: 9~27V (3~6S LiPo) w/TVS protection
PDB: 4x30A (Max.4x50A), 6 layers*2oz copper PCB
Dual BEC: 5V 2A andamp; 9V 2A
LDO 3.3V: Max.300mA for Spektrum RX
Current Sensor 200A (Scale 165)
Battery Voltage Sensor: 1:10 (Scale 110)
2x LEDs for FC STATUS (Blue, Red)
6x PWM / DShot outputs without conflict
5x UARTs
1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible)
1x pair I2C1 pads (for INAV firmware only)
1x Side-press button for BOOT(DFU) mode
36x51mm PCB with 30.5mm mounting holes andamp; XT60 socket
12g
w/ 1x Rubycon ZLH 35V/470uF (Low ESR)
w/ 4x M3 Anti-vibration Standoffs
w/ FR4 PCB Plate 36*36*1mm
Package Including:
1 * Matek F4 Flight Controller
2. Toolcool Racerstar StarF3S 30A BL_S 4 In 1 ESC 5V BEC w/ F3 Flight Controller AIO OSD BEC Current Sensor
Feature
BB2, 48MHZ Chip 4 in 1 ESCESC has 5V 1A LBEC Output
Built-in F3 Flight Control Board, MPU6000
FC has 5V 2A BEC
With Current Sensor;Support 2-4S Lipo Battery;Support Oneshot42, Oneshot125, Multishot and 16.5 Dshot600;All codes use damped light mode.Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
Description
Note:1.The 4 installing holes were linked to the possitive of power. ( battery +) Therefore, must use the plastic screws or any others non-conductive screws to install.
2.Can not support PPM Receiver
Item Name: 30A BL_S ESC w/ F3 Flight Controller
Model: StarF3s
30A 4 In 1 ESC
Con. Current: 30A
Peak Current: 35A (10S)
Lipo: 2-4S
BEC: 5V @1A
Programming: YES
F3 FC AIO OSD BEC and Current Sensor
Input Voltage: 2-4S Lipo
Output Voltage: 5V@2A
Sensor: STM32F3 CPU
ICM-MPU6000 Accelerometers and Gyroscopes SPI MicroUSB socket
Size(PCB): 36x36mm
Weight: 18g
Package Included:
1x 30A 4 In 1 ESC Buit-in F3 Flight Controller
1x XT60 Connector
1x bag of screws
1x Manual
3. Toolcool Racerstar RS20A 20A BLHELI_S OPTO 2-4S ESC Support Dshot150 Dshot300 for FPV Racing
Feature
With Blheli_s FirmwareWith 24MHz BB1 Clip
Support Oneshot42 Multishot, Dshot150 and Dshot300
Smaller size and lighter
Strong adaptive ability
Description
Item Name: 20A BLHELI_S ESC Electronic Speed ControllerModel: RS20A
Con.Current:20A
Peak Current(10s):25A
Input Voltage: 2-4S
BEC: No
Programming : YES
Firmware: Blheli_S
Weight:7.9g
Size(PCB):27*12mm
Notice: DO NOT USE BHELISUIT if you have iNav on your flight controller.
Package Included:
1x Racerstar 20A ESC
4. Toolcool Racerstar StarF4S 30A Blheli_S Dshot 4 in 1 ESC AIO F4 OSD Flight Controller w/ BEC Current Sensor
Feature
Built-in F4 Flight Control Board integrated with OSDBB2, 48MHZ Chip
Blheli_S Firmware,
4 in 1 ESC, Super small size (36*36mm) and light weight, easy to install and use
With 5V 3A LBEC;With Current Sensor;Support 2-4S Lipo Battery;Support Oneshot42, Oneshot125, Multishot and 16.5 Dshot600;All codes use damped light mode.Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
Description
Model: StarF4SLipo Battery: 2-4S
Con. Current: 30A
Peak Current: 35A (10S)
LBEC: 5V @3A
Programming: YES
F4 FC + OSD + BEC + Current Sensor
Input Voltage: 2-4S Lipo
Output Voltage: 5V@1A
Sensor: STM32F4 CPU
ICM-MPU6000 Accelerometers and Gyroscopes SPI MicroUSB socket
Size(PCB): 36x36mm
Weight: 22g
Package Included:
1x Racerstar 30A 4 in 1 ESC Buit-in F4 OSD FC
2x Cable
1x bag of screws
1x Manual
5. Toolcool Racerstar RS20Ax4 V2 20A BB2 48MHz Blheli_S 2-4S 4 in 1 Opto ESC Support Oneshot42 Multishot 16.5 Dshot600
Feature
With Blheli_S firmware4 in 1 ESC, more easier to install
With 48MHz BB2 Chip
Support oneshot42 multishot
Small size and light weight
Description
Model: RS20Ax4 V2Item Name: 20A BB2 48MHz Blheli_S 2-4S Opto Oneshot42 Multishot 4 in 1 ESC
Input Voltage: 2-4S
Con.Current:20A
Peak Current(10s):25A
BEC:NO
Programming :YES
Installing Distance: 30mm
Weight:19g
Size(PCB):36x36mm
Package Included:
1x 20A V2 4 in 1 ESC
1x 5P Cable
1x Screw bag
1x Manual
6. Toolcool Racerstar RS20Ax4 20A 4 in 1 Blheli_S Opto ESC 2-4S Support Dshot150 Dshot300 for FPV Racer
Feature
With Blheli_S firmware4 in 1 ESC, more easier to install
With 24MHz BB1 Clip
Support oneshot42 multishot, Dshot150 and Dshot300
Small size and light weight
Description
Item Name: 20A 4 in 1 Blheli_S Opto 2-4S ESCModel: RS20Ax4
Input Voltage: 2-4S
Con.Current:20A
Peak Current(10s):25A
BEC:NO
Programming :YES
Installing Distance: 30mm
Net Weight:19g
25g ( Including cable)
Size(PCB):36x36mm
Rev 16.2 Fixed bug that prevented temperature protection
Improved robustness to very high input signal rates
Beeps can be turned off by programming beep strength to 1
Throttle cal diffirence is checked to be above required minimum before storing
Throttle cal max is not stored untill successful min throttle cal.
Package Included:
1x RS20Ax4 20A 4 in 1 ESC
1x 5P Cable
1x Screws bag
7. Toolcool Racerstar RS30A Lites 30A Blheli_S 16.5 BB2 2-4S Brushless ESC Support Dshot600 for FPV Racer
Feature
BB2, 48MHz ChipDouble board Plate
Support oneshot42, oneshot125 and multishot
Description
Item Name: 30A Blheli_S BB2 2-4S ESCModel: RS30A Lites
Input Voltage: 2-4S
Con. Current: 30A
Peak Current: 36A
BEC:NO
Programming :YES
Net Weight: 9g
Size:27*15mm
Package Included:
1x 30A ESC
1x Manual
8. Toolcool Racerstar REV35 35A BLheli_S 3-6S 4 In 1 ESC Built-in Current Sensor (Anniversary Special Edition)
Feature
BB21 MCU, 48Mhz Runs BLHELI_S J_H_xx firmwareSupports 3-6S Lipo input
4PWM input
Built-in Current sensor
Only 36x36mm, mount holes 30.5x30.5mm M3;No External capacitors needed;Dshot600 ready(Default) Support PWM/ONESHOT/MULTISHOT/DSHOT
Description
Item Name: 35A BLheli_S 3-6S 4 in 1 ESCModel: REV35
Con. Current: 35A
Peak Current(10s): 40A
LBEC: NO
SBEC:NO
Lipo: 3-6S
Programming: YES
Weight:13g
Size(PCB): 36x36mm
Hole size: 30.5x30.5mm
Package Included:
1x Racerstar REV35 35A 4 in 1 ESC