Top 7 recommendation behringer pedal adapter

BEHRINGER POWER SUPPLY PSU-SB

POWER SUPPLY PSU-SB General Purpose DC 9 V Power Adapter

• Converts to DC 9 V for use with virtually all stomp boxes and effects pedals
• Typical DC-type 2.2 mm plug with negative tip and positive sleeve
• Provides a generous 100 mA current to power even digital products
• High-quality components and exceptionally rugged construction ensure long life
• Conceived and designed by BEHRINGER Germany

Use our new general purpose DC 9 V power adapter PSU-SB to power virtually all your guitar or bass guitar stomp boxes and effects pedals.

This adapter provides a generous 100 mA current to power even digital products. For connection, it features a typical DC-type 2.2 mm plug with negative tip and positive sleeve.

This universal power supply gives you ultimate power for your most demanding gigs End user can also obtain additional information at http://www.behringer.com/EN/Products/PSU-SB.aspx

BEHRINGER PEDAL BOARD PB600

Universal Effects Pedal Floor Board with 9 V DC Power Supply and Patch Cables

• Ultra-compact and lightweight pedal board for transporting up to 6 effects pedals, including patch cables
• Generous 1.7 A power adapter included for powering more than 12 devices* - includes 1 x 6 daisy-chain cabling
• Ultra-rigid plastic design withstands even heavy impact
• High-quality components and exceptionally rugged construction ensure long life
• Conceived and designed by BEHRINGER Germany

When effects are an integral part of your rig, their power adapters and patch cables can often be the most vulnerable part, and the most likely to sabotage your set if they're not pampered. Rather than tossing your pedals, power adapters and all other cabling into a duffel bag after a gig, keep them safe - and ready to rock at a moment's notice - with the PB600.

It's All About Connections

This awesome pedal board makes hooking up six 2.5" x 4.5" pedals as easy as hooking up just one (of course, if you're using pedals that aren't 2.5" x 4.5", the snug foam padding can be cut to accommodate pedals of varying shapes). The PB600 includes 1/4" patch cables, so you can leave your pedals connected to one another, ready to pass signal even when you're transporting them. It also comes with 1 x 6 daisy chain cabling so that when you plug in the 1.7 A power adapter, all your pedals receive power. Meanwhile, all cabling remains safe and free of strain. Failure is almost guaranteed when you're dealing with a rat's nest of loose cabling, but with the PB600, your effects chain is always safe and organized.

Connect your guitar, bass or keyboard to the single 1/4" input in the upper right corner of the board. A pair of 1/4" FROM EFFECTS jacks in the upper left corner allow you to connect stereo effects, and two 1/4" OUTPUT TO AMP jacks send a left and right stereo signal to up to two amps.

When it's time to load out, just unplug the power supply, disconnect your guitar and amp, put the lid back on the PB600 and slide the locking latches back into place. The heavyimpact plastic casing will protect your pedals from the very worst dings, scrapes and scratches the road throws your way.

BEHRINGER POWER THE WORLD PSU-HSB-ALL

All-Country DC 9 V / 1.7 A Power Adapter with Daisy-Chain Connectors, Jumper Cables and All-Country Mains Adapters

• 1.7 A current capacity can power more than 20 effects pedals, keyboards and other DC 9 V gear*
• Supplied with a full complement of connectors and jumper cords for total compatibility
• Includes 4 assorted jumper cables and 2 daisy-chain cables each with 5 connectors
• Takes up only one outlet space and frees up more room for your pedals
• Runs on any AC power supply from 100 - 240 V; worldwide usability without transformer
• Transformerless design eliminates 50/60-cycle hum and extraneous noise
• High-quality components and exceptionally rugged construction ensure long life
• Conceived and designed by BEHRINGER Germany

BEHRINGER FOOT CONTROLLER FCV100

Ultra-Flexible Dual-Mode Foot Pedal for Volume and Modulation Control

• Volume control of 1 stereo or 2 individual musical instruments
• Dedicated modulation function for direct connection to keyboard's modulation control input
• VCA control for utmost reliability and smooth audio performance
• Adjustable minimal volume
• Standard 9 V battery or 12 V DC adapter operation (not included)
• Battery quot;lowquot; indicator
• Ultra-compact, road-suitable housing
• High-quality components and exceptionally rugged construction ensure long life
• Conceived and designed by BEHRINGER Germany

Get louder, get quieter, or get modulated with the FOOT CONTROLLER FCV100. This versatile pedal works equally well as a volume pedal or a modulation pedal.

Routing Options Galore

The FCV100 can accommodate two mono or one stereo instrument via dual 1/4" INPUT jacks. By switching into NORM mode, the FCV100 is capable of controlling the volume of two individual instruments. In CV mode the FCV100 can control modulation and volume levels of other musical instruments by connecting OUTPUT 2 to the volume or modulation input of the instrument. In CV mode, when OUTPUT 2 is in use, INPUT/OUTPUT 1 can still be used for controlling the volume of another instrument, similar to NORM mode.

It's Easy!

Once you have determined your hookup configuration, simply depress the pedal to increase sound, then rock back on your heel to decrease the sound. By turning the MIN VOL control, you can determine the minimum volume you wish to achieve. You can power this pedal with a 12 V DC Power adapter (not included) or a 9V battery.

Value

Dramatic shifts in volume and modulation can mean the difference between an ordinary musical passage and an extraordinary listening experience. Take hold of these mystifying nuances with the FCV100.