When you want to find co2 detector hardwired, you may need to consider between many choices. Finding the best co2 detector hardwired is not an easy task. In this post, we create a very short list about top 5 the best co2 detector hardwired for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 5 co2 detector hardwired:
Reviews
1. First Alert BRK 9120BFF Hardwired Smoke Alarm with Battery Backup, Single
Feature
Tamper resistant locking pins, single button silence/test and loud 85dB alarm120-Volt AC power with 9-Volt battery backup (included) to keep alarm functioning during power outage
Open mounting design for easy installation with side load battery compartment for quick replacement and interconnectable up to 18 units (12 smoke, 6 CO/heat/relay)
10-Year limited warranty
Description
NOTE:The product is a hardwired alarm, also confirm if the wiring polarity is correct and that all wire nut connections are secure. A loose neutral (white wire) connection within the home junction box could prompt a device malfunction. Promote greater household safety with the First Alert 9120B Hardwired Smoke Alarm with Battery Backup. This 120-volt AC smoke detector uses an ionization smoke sensor to reliably detect smoke from hot, fast-flaming fires and alerts you with a loud 85-decibel alarm. Designed to be wired directly into your home's electrical system, this hardwired smoke detector features a backup battery that helps keep the alarm functioning even in the event of a power outage. The gasket-less mount helps ensure a perfect alignment for easy installation, while tamper-resistant locking pins keep the alarm secure. And thanks to the convenient test/silence button, you can easily check whether the alarm is functioning properly and mute false alarms. This smoke alarm can integrate with up to 12 other First Alert or BRK hardwired alarms and features a latching indicator that identifies which unit triggered the alarm.2. Kidde KN-COP-IC Hardwire Carbon Monoxide Alarm with Battery Backup and Digital Display, Interconnectable
Feature
Digital display displays the level of carbon monoxide the unit is sensingBattery pull tab eliminates battery installation time and keeps battery fresh
Peak level memory displays the highest CO concentration measured since the last reset
Tamper resist locking pin helps deter alarm tampering and theft
Kidde's carbon monoxide alarms meet the requirements of Underwriters Laboratories (UL), an independent facility that tests products for compliance with widely-accepted safety standards
Description
Kidde KN-COP-IC Hardwire Carbon Monoxide Alarm w/ Battery Backup & Digital Display- Digital display displays the level of carbon monoxide the unit is sensing
- Battery pull tab eliminates battery installation time and keeps battery fresh
- Peak level memory displays the highest CO concentration measured since the last reset
- Tamper resist locking pin helps deter alarm tampering and theft
- Kidde's carbon monoxide alarms meet the requirements of Underwriters Laboratories (UL), an independent facility that tests products for compliance with widely-accepted safety standards
Need more information on this product? Click here to ask.
3. Kidde Battery-Operated(Not Hardwired) Combination Smoke/Carbon Monoxide Alarm with Voice Warning KN-COSM-BA
Feature
Smart 2-in-1 Voice Alarm - Voice announces "Fire!" or "Warning! Carbon Monoxide"Smart Hush - Nuisance alarms are silenced by pressing the hush button.
Battery Safeguard with Front Load Battery Door - Quick and easy battery replacement.
Test/Reset Button, LEDs, and Low Battery Warning. Temperature Range: 40F (4.4C) to 100F (37.8C)
Meets Underwriters Laboratories (UL) UL2034 and UL217 compliance.
Note: Refer the User Guide before use.
Description
The Kidde KN-COSM-BA battery-operated carbon monoxide and smoke alarm combines two important safety devices into a single unit.This alarm includes a voice warning system that makes four announcements: fire, carbon monoxide, low battery, or smart hush activation. The voice alarm eliminates any confusion and clearly warns you and your family of a smoke or carbon monoxide danger, or if your battery is in need of replacement. This unit uses three AA batteries, protecting you and your family even during a power outage. This alarm uses ionization-sensing technology for the smoke alarm. Ionization-sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric-sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fire that can occur within the home.
KN-COSM-BA Battery-Operated Combination Smoke and CO Alarm at a Glance Employs both smoke and carbon monoxide sensors Stand-alone battery-operated alarm is easy to install throughout the home, as no wiring is needed Features a hush button to silence the alarm for non-emergency situations like a smoky dinner Voice alarm eliminates confusion and clearly warns of smoke/CO danger or low battery Protects from two different hazards, smoke and carbon monoxide, and has a different voice warning for each hazard.
The battery-operated KN-COSM-BA offers easy installation.
Combination Smoke/Carbon Monoxide Alarm The Kidde combination carbon monoxide and smoke alarm includes a voice warning system that eliminates confusion and clearly warns you and your family of a smoke or carbon monoxide (CO) danger, of low battery, or of hush-mode setting.
Alarm Warnings Fire:
The red LED will flash and be accompanied by three long alarm beeps followed by a verbal warning message: "Fire! Fire!" The alarm will repeat the pattern until smoke is eliminated.
Carbon Monoxide:
Four short alarm beeps followed by a verbal warning: "Warning--carbon monoxide!" This continues until the unit is reset or the CO is eliminated.
Low Battery:
One chirp followed by warning: "Low battery." The red LED light will flash. This pattern will continue every minute for the first hour. After the first hour, the red LED light will flash once every minute and will be accompanied by the chirp sound. The low-battery warning will only sound once every 15 minutes.
Voice Hush Indication:
"Hush activated" and "Hush canceled" voice announcement. Peak Level Memory: If the alarm had detected a CO level of 100ppm or higher when the test/reset button is pressed, the unit will announce, "Carbon monoxide previously detected" to warn of the CO incident. Trademarked Hush Feature for Convenience By pressing the hush button, you can easily and safely silence nuisance alarms caused by non-emergency situations, such as overcooked dinners. This feature desensitizes the alarm for approximately 10 minutes. If the smoke is not too dense, the alarm will silence immediately, the unit will verbally announce, "Hush mode activated," and the green LED will flash every two seconds for approximately 10 minutes.
Reliable Battery Power, Indicator LED, Test Feature and Low-Battery Warning The battery-powered alarm provides continuous protection, even during power outages. Because this alarm only helps protect you if it's working, this unit features a red LED that flashes every 30 to 40 seconds to indicate that it is operating correctly.
For additional peace of mind, the alarm also contains a test/reset button that enables you to periodically test its circuitry and horn. If any form of battery failure is detected, the red LED light will flash and the unit will chirp one time, followed by the warning message, "low battery." This cycle will occur once every minute, and will continue for at least seven days. Seven years after initial power up, this unit will chirp" every 30 seconds.
This is an operational end-of-life feature that will indicate that it is time to replace the alarm. UL 2034, the independent standard applicable to CO alarms, requires CO alarms to have an end-of-life warning. This requirement went into effect in March 2007, meaning any CO alarm manufactured after April 2007 with a UL listing must have this feature. Most states that require CO alarms in residential dwellings mandate that the alarm meet the UL 2034 standard.
The unit measures just 5.75 inches in diameter and 1.7 inches deep, and it features a neutral white finish. It includes tamper-resistant features to deter vandalism or theft. This combination smoke/CO alarm is UL listed, so you can be confident of its quality, and it is backed by a ten-year limited warranty.
About Kidde:
A UTC Fire and Security Brand Renowned for global leadership in fire detection and suppression, Kidde provides solutions ranging from portable fire extinguishers to advanced industrial controls such as flame detection and explosion suppression systems. Kidde is a UTC Fire and Security brand, with a history that's rich with innovations, from the patent of the Chubb detector lock in 1818 to the development of the world's first wireless networked smoke detectors in 2004.
What's in the Box:
Combination smoke and carbon monoxide alarm with mounting bracket and mounting hardware, three AA batteries, a and bilingual (English/Spanish) user's manual.
4. First Alert BRK SC-9120B Hardwired Smoke and Carbon Monoxide Alarm with Battery Backup
Feature
Superior carbon monoxide sensor and dual ionization smoke alarmInter-connectable with BRK and First Alert hardwired smoke and carbon monoxide alarms
Easy to install universal mount bracket
Simple to use silence/test button; separate smoke and CO latching alarm indicators
9-volt battery included; 7-year limited warranty
Description
.Superior carbon monoxide sensor and dual ionization smoke alarm|Inter-connectable with BRK and First Alert hardwired smoke and carbon monoxide alarms|Easy to install universal mount bracket|Simple to use silence/test button; separate smoke and CO latching alarm indicators|9-volt battery included; 7-year limited warranty5. USI Electric MICN109 Hardwired 3-in-1 Smoke, Carbon Monoxide and Natural Gas Alarm
Feature
3-in-1 alarm provides triple the protection with a single installation to protect against fires, carbon monoxide and natural gas120-volt AC/DC hardwired alarm with backup battery is suitable for houses, apartments and mobile homes
Mount the bracket to any standard wiring junction box and use the large mounting base to cover imperfections in drywall
Features a quick activation pull-tab and a front-loading battery drawer for replacement without removing the alarm from the bracket
Comes with a 7 year limited warranty