If you looking for petg 1.75 filament then you are right place. We are searching for the best petg 1.75 filament on the market and analyze these products to provide you the best choice.
Reviews
1. eSUN 3D 1.75mm PETG Green Filament 1kg (2.2lb), PETG 3D Printer Filament, Semi-Transparent 1.75mm Green
Feature
1KG net (approximately 2.2 lbs) Filament with Clear SpooleSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant
1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
Recommended Extrusion/Nozzle Temperature 230C - 250C
Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5"
Description
eSUN 3D Printer Filament: PETGExtrusion Temperature Range: 230_ to 250_
Plate temperature: 80~90_ or without heated
Printing speed: 30~60mm/s
Moving speed: 30~60mm/s
Advantages of PETG: PETG is an excellent material which combines the advantages of both PLA and ABS. Odorless; Little shrinkage rate; hydrophobicity (Will not absorb water and as such clog the extruders); Outstanding toughness and high impact strength; Good liquidity (flows smoothly); High mechanical strength and excellent flexibility; Good glossy finish;
2. eSUN 3D 1.75mm PETG Blue Filament 1kg (2.2lb), PETG 3D Printer Filament, 1.75mm Semi-Transparent Blue
Feature
1KG net (approximately 2.2 lbs) Filament with Clear SpooleSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant; 16 colors to choose from; Semi-Transparent Colors: blue, magenta, yellow, natural, green, orange; Solid Opaque Colors: solid black, solid white, solid red, solid blue, solid gray, solid green, solid yellow, solid purple, solid gold, solid silver
1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
Recommended Extrusion/Nozzle Temperature 230C - 250C
Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5"
Description
eSUN 3D Printer Filament: PETG16 Colors to Choose From.
Extrusion Temperature Range: 230 Celsius to 250 Celsius. Most users print around 245 Celsius.
Plate temperature: 80~90 Celsius or without heated
Printing speed: 30~60mm/s
Moving speed: 30~60mm/s
Advantages of PETG: PETG is an excellent material which combines the advantages of both PLA and ABS. Odorless; Little shrinkage rate; hydrophobicity (Will not absorb water and as such clog the extruders); Outstanding toughness and high impact strength; Good liquidity (flows smoothly); High mechanical strength and excellent flexibility; Good glossy finish;