When you want to find camper stabilizer jacks, you may need to consider between many choices. Finding the best camper stabilizer jacks is not an easy task. In this post, we create a very short list about top 16 the best camper stabilizer jacks for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 16 camper stabilizer jacks:
Reviews
1. 4 PC 5000lb 4"- 24" RV Camper Scissor Leveling Jacks Trailer Stabilizer w/Handle
Feature
Stablizing and leveling your RV/Trailer, Remains steady on soft surfaces because of wide bow-tie baseMaterials: Heavy Duty Weather and Rust-resistant Coated Heavy Duty Metal; Capacity:5,000 lbs
Extended height: 24", Retracted height: 5", Retracted length:26", width: 7.5"
Stabilizer jacks have a working range of 13-3/4" to 23-1/2" and are approximately 5 inches tall when folded
This Kit includes: 4 x Scissor Jacks, 2 x Crank Handles
Description
Autoforever Heavy Duty Floor Scissors Lift Jack features a compact and portable size, convenient to carry in your motorcycle without taking up too much space. Made of high-grade metal material, it is durable, rust-proof and safe to use. In ergonomic scissors style, it helps you easily lift up your motor in emergency such as changing flat tires. This kit contains Four 24-inch stabilizer jacks and manual handle. Each adjusts from 4" to 24" inches as your situation requires, and the bow-tie base steadies the jack on soft surfaces.Features:
1. Made of high-grade metal material, safe and reliable
2. Exquisite design with scissors style
3. Suitable for long and hard off-road trips
4. Raises, lowers and stabilizes camper Remains steady on soft surfaces because of wide bow-tie base Bolts or welds on.
Specifications:
1. Capacity: 5000 lbs
2. Lift Working Range: 13 3/4" to 23 1/2"
3. Extended height: 24"
4. Retracted height: 4"
5. These stabilizer jacks are only used on RV/trailers for stabilizing and leveling purpose. Never use for lifting, changing tires or supporting weight of any vehicles, the vertical static load should never exceed 1/3 of the rating.
Package Includes:
4 x Scissor Lift Jacks
2 x Crank Handle
2. Set of 4 5000 lb 24" RV Trailer Stabilizer Leveling Scissor Jacks w/handle & Power Drill Socket -Model# 26020
Feature
Stablizing and leveling your RV/Trailer, Remains steady on soft surfaces because of wide bow-tie baseIncludes 4 steel jacks and 1 crank handle, also include a 3/4" 19mm hex magnetic socket to raise/lower jack faster by power drill, also include 16 pcs 3/8" mounting screws hardware
Capacity: 5,000 lbs per jack (Min. breaking strengh), bolts or weld on
Extended height: 24", Retracted height: 5", Retracted length:26", width: 7.5"
For RV stablizing and leveling purpose only, Never use for lifting, changing tires or supporting weight of any vehicles,
Description
Warning: these jacks are from Libra Trailer Parts only, our jacks has passed industrial standard testing, all other sellers under this listing actually selling different jacks, beware of cheap jacks! These 4 leveling scissor jacks with 5,000-lb capacity each will keep your RV level and stable. Each adjusts from 4" to 24" inches as your situation requires, and the bow-tie base steadies the jack on soft surfaces. Features: Raises, lowers and stabilizes camper Remains steady on soft surfaces because of wide bow-tie base Bolts or welds on, Includes 4 steel jacks, 1 crank handle, 1 power tool socket, 16 pcs mounting hardware. Specs: Capacity: 5,000 lbs per jack (Min. breaking strength) Extended height: 24" Retracted height: 4" These stabilizer jacks are only used on RV/trailers for stabilizing and leveling purpose. Never use for lifting, changing tires or supporting weight of any vehicles, the vertical static load should never exceed 1/3 of the rating. Improper use can result in property damage, serious injury or death.3. Set of 2 5000 lb 24" RV Trailer Stabilizer Leveling Scissor Jacks w/handle & Power Drill Socket & hardware -part#26020
Feature
Stablizing and leveling your RV/Trailer, Remains steady on soft surfaces because of wide bow-tie baseIncludes 2 steel jacks and 1 crank handle, also include a 3/4" 19mm hex magnetic socket to raise/lower jack faster by power drill and 8 pcs 3/8" mounting screws hardware!
Capacity: 5,000 lbs per jack (Min. breaking strengh), bolts or welds on
Extended height: 24", Retracted height: 5", Retracted length:26", width: 7.5"
For RV stablizing and leveling purpose only, Never use for lifting, changing tires or supporting weight of any vehicles,
Description
These 2 leveling scissor jacks with 5,000-lb capacity each will keep your RV level and stable. Each adjusts from 4" to 24" inches as your situation requires, and the bow-tie base steadies the jack on soft surfaces. Features: Raises, lowers and stabilizes camper Remains steady on soft surfaces because of wide bow-tie base Bolts or welds on Includes 2 steel jacks and 1 crank handle, magnetic power tool socket & mounting hardware. Specs: Capacity: 5,000 lbs per jack (Min. breaking strength) Extended height: 24" Retracted height: 4" These stabilizer jacks are only used on RV/trailers for stabilizing and leveling purpose. Never use for lifting, changing tires or supporting weight of any vehicles, the vertical static load should never exceed 1/3 of the rating. Improper use can result in property damage, serious injury or death.4. Camco RV Leveling Scissor Jack Socket Drill Adapter, Fits 3/8" and 1/2" Power Drills, Works With All 3/4" Hex Drive Jacks (57363)
Feature
Reduces time and effort to raise or lower scissor jacksFits 3/8" or 1/2" power drills
Works with all 3/4"Hex drive jacks
Description
Camco's Leveling Scissor Jack Drill Socket reduces the time and effort it takes to raise and lower your scissor jacks. The adapter fits 3/8" or 1/2" power drills and works with all 3/4"Hex drive jacks.5. BAL 23025 Tent Trailer Stabilizer - 17-Inches (Set of 2)
Feature
Crank down jackWorks on lightweight trailers with up to 16" frame to ground clearance.
700 lb. lifting capacity and 1000 lb. static capacity
Set of two includes - Trailer stabilizing Jack and Crank Handle
Rust-prohibitive black E-coating for long life and trouble-free performance.
Description
BAL / Norco Industries manufactures quality products for the RV industry, such as slideouts, trailer frames, roof bows, leveling & stabilizing jacks, tongue jacks and wheel chocks.6. X-Chock Wheel Stabilizer - Pair - One Handle - 28012
Feature
Provides added stabilization and prevents tire shifts by applying opposing force to tandem tire applicationsAs opposed to other chocks, the X-Chock works with the tires' natural movement instead of against them
Fits even the tightest of applications retracting down to 1 3/8" and extends to 10".
Rust inhibitive coating.
Plated ratchet wrench with comfort bumper included
Item weighs 11.2 lbs
Description
The X-Chock starts off where the Deluxe Tire Locking Chock left off, but it's new, slimmer design will fit into more axle applications. Fits between tandem tires, it locks wheels by applying force to both tires. Aids in trailer stabilizing and prevents tire shifts. A hand operated plated ratchet wrench (Model 841025, included) turns a drive nut, extending the chocks against the tires for locking and retracting the chucks for removal.7. Cynder 00670 Leveling Scissor Jacks 24" Stabilizer (24" - Pack of 2)
Feature
5000 lbs. load capacityBolt-on or weld-on installation
Fits pop-ups, trailers, campers motorhomes and rvs
Powder coated for maximum rust protection
Description
Provides stability to travel trailers, fifth wheels and motorhomes. Large 4.5" x 9" footpads combat sinking and tilting. Heavy-duty steel jack fits most RVS regardless of the ground clearance. Extends from 4" to 24" to eliminate the need for cumbersome wood blocks. Powder coated black finish resists rusting. May be mounted in front or rear. Includes crank handle.8. Eaz-Lift 24" RV Stabilizing Scissor Jack, Fits Pop-Up Campers and Travel Trailers, Can Support Up to 7,500 lbs. -(2 Pack) (48830)
Feature
Bolt-on or weld-on installation7500 lb. load capacity
Includes two scissor jacks and one scissor jack socket for power drill
Fits pop-ups and trailers
Powder coated for maximum rust protection
Description
Eaz-Lift's Olympian 24" Scissor Jacks fit pop-ups and trailers and allow for either bolt-on or weld-on installation. It has a certified 7500 lb. load capacity and is powder coated for maximum rust protection. Comes as a set of two. Measures 4-3/8 high when fully collapsed and 23-3/4 when fully extended.9. Camco Olympian Aluminum Stack Jacks, Stabilize, Position And Level Your RV, Trailer Or Camper, Can Support Up to 6,00 lbs, Extends 17" - (4 Pack) (44560)
Feature
Stabilize and level your RVEach jack supports up to 6000 lbs
Cast aluminum
Adjustable from 11" - 17"
Set of 4
Description
Camco Olympian RV Aluminum Stack Jack Stands are designed to get secure and level RV positioning and stability. It is made from cast aluminum and can support up to 6000 lbs. These Jack Stands extend up to 17" and are easy to use.10. RV Stabilizer System for 5th Wheels and Camper Trailers
Feature
Made in USA System Stabilizes a Parked Travel Trailer or Fifth Wheel TrailerTrailer Must Have 4 Jacks, 2 front and 2 Rear for the system to be installed. Includes the two required Foot Plates. If your trailer has a power leveling system you will need to order the Power Leveling Kit. Check our website www.steadyfast.com for detailed Installation Instructions.
Easy setup. Permanently installed in 2-3 hours so there is nothing to setup or store.
Works on both 5th Wheels and Travel Trailers with existing stabilizer jacks. There is a different Kit for trailers with power leveling systems.
Eliminates Need for Tripod. Between Wheel Chocks, and Slide Out Jacks, Greatly Reduces Setup Time.
Description
Notes: The pictures showing the product in orange are of our development and demonstration trailer. The components are painted orange so they stand out. The product ships in spartan bronze color. If 5th wheel landing gear are not installed right next to the frame, please measure inside distance between the legs. If greater than 74" please let us know when ordering so we can provide longer brace.Complete System to Stabilize a Travel Trailer or Fifth Wheel. Trailer Must Have 4 Jacks, 2 front and 2 Rear for the system to be installed. Includes the two required Foot Plates. If you have a power leveling system please order our Kit for power leveling systems.
The STEADYfast Trailer Stabilizing System is designed to give the best possible movement reduction of a parked Fifth Wheel or Travel Trailer and at the same time provide the most convenient and easiest setup. It will significantly out perform any similarly functioning equipment on the market today.
The STEADYfast Trailer Stabilizing System:
* INSTALLS PERMANENTLY
* REQUIRES NO SET UP
* IS ENGAGED OR DISENGAGED IN SECONDS
The STEADYfast system anchors the trailer frame to the ground using 3 rigid braces that are attached to high performance self leveling foot plates. The foot plates attach to existing jacks. Conveniently located locking clamps and the rigid design allow the trailer to be stabilized with ease. Designed and Manufactured in the USA specifically for 5th Wheel, Camper, and Travel trailers.
11. Valterra 020106 RV Stabilizer
Feature
020106Description
Simple design gives your coach solid footing on any surface. Works with leveling jacks on travel trailers, 5th wheels, motorhomes or pop-ups, or use it independently. Using two--front and rear or on both sides--makes RV rock solid. Sets up in minutes, no tools needed. Folds for easy storage. Fits frames 14''H to 28''H. Lightweight, corrosion-resistant aluminum construction. Includes blue ratchet strap (as shown). 250 pound weight capacity Valterra RV Leveling Video12. Set of 4 5000 lb 24" RV Trailer Stabilizer Leveling Scissor Jacks w/handle - 26020
Feature
Stablizing and leveling your RV/Trailer, Remains steady on soft surfaces because of wide bow-tie baseIncludes 4 steel jacks and 1 crank handle, also include a 3/4" 19mm hex magnetic socket to raise/lower jack faster by power drill, also include 16 pcs 3/8" self taping mounting screws hardware
Capacity: 5,000 lbs per jack
Extended height: 24", Retracted height: 4", retracted length: 12", width: 7.5"
For RV stablizing and leveling purpose only, Never use for lifting, changing tires or supporting weight of any vehicles,
Description
Warning: these jacks are from Libra Trailer Parts only, our jacks has passed industrial standard testing, all other sellers under this listing actually selling different jacks, beware of cheap jacks! These 4 leveling scissor jacks with 5,000-lb capacity each will keep your RV level and stable. Each adjusts from 4" to 24" inches as your situation requires, and the bow-tie base steadies the jack on soft surfaces. Features: Remains steady on soft surfaces because of wide bow-tie base Bolts or welds on, Includes 4 steel jacks and 1 crank handle Specs: Capacity: 5,000 lbs per jack (Min. breaking strength) Extended height: 24" Retracted height: 4" These stabilizer jacks are only used on RV/trailers for stabilizing and leveling purpose. Never use for lifting, changing tires or supporting weight of any vehicles. Improper use can result in property damage, serious injury or death and will void the warranty!13. Pair of Telescoping Trailer Stabilizer Jacks(1000lb capacity each) by Pacific Rim
Feature
650 lbs. lift support capacity per jack.Adjustable from 11-1/2" to 17-3/4" vertical height
Handle included with pair of stabilizer jacks.
Black painted finish
1000 lbs. support capacity per jack.
Description
Pair of flip down stabilizer jacks with handle, ideal for all types of RV, utility and cargo trailers.14. Camco RV Stabilizing Jack Pads, Helps Prevent Jacks From Sinking, 6.5 Inch x 9 Inch Pad - 4 pack (44595)
Feature
Helps prevent jacks from sinking into soft groundInterlocking design and handy storage strap for easy storage
Built-in handle for ease of use
Measures 6.5" x 9" x 1"
Set of 4
Description
4 pack, stabilizer Jack pad, for use with stack jacks, Fifth wheel stabilizers, swing down stabilizers & awning arms to keep them from sinking into soft ground, interlocking for convenient storage with handy strap, built in handle for ease of use, solidly constructed of durable polypropylene with UV inhibitors. This product adds a great value. Product is highly durable and very easy to use. This product is manufactured in china.15. Goplus 4Pcs 24" Scissor Jack RV Camper Trailer Leveling and Stabilizer w/ 2 Crank Handles 5000lb Heavy Duty Steel
Feature
5,000Lbs Load CapacityThe lifting height can be adjusted from 4'' to 24", and the lifting capacity is about 5,000lbs per piece. Weight of each scissor is 12.5Lbs.Made of Heavy Duty SteelThis leveling scissor jack is made of heavy duty steel, coated with rust-proof finish. Anti-corrosion handle for adjusting height. Package comes with 4 Scissor Jacks and 2 Crank Handles.
Foldable and PortableFolding size of this scissor Jack is about 26 2/5" 14 1/5"4" (L W H), which is portable and convenient without taking up much place.
Easy to OperateDesign of the jack is compact and user-friendly, it is easy to operate and less effort needed to lift a car.
Safety GuaranteedThe required torque is less than general jack, and it also can be operated in a narrow space which avoid the possibility of fingers injury from touching the ground.
Description
DescriptionThis is our leveling scissor jack,which has a great strength to raise, level and lower RV and camper for tire repair/change. A necessity for long-distance driving travel. Item made by heavy duty iron with a large load capacity of 5000lbs. Coated with rust-proof finish. Anti-corrosion handle for adjusting height.
Feature
Specification
16. Ultra-Fab Products 48-979004 Ultra Stacker Jacks
Feature
Aluminum stacker jacks are perfect for tent campers and smaller trailers; Handy 4 pack allows for added stability and supportExtends from 11" to 17"
6,000 Lb. Capacity
Stackable units take up minimal storage space
Manufacturers Lifetime Warranty