When you want to find countersunk bolt 1/4, you may need to consider between many choices. Finding the best countersunk bolt 1/4 is not an easy task. In this post, we create a very short list about top 15 the best countersunk bolt 1/4 for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 15 countersunk bolt 1/4:
Reviews
1. 1/4-20 x 1-3/4" Flat Head Machine Screws, Phillips Drive, Stainless Steel 18-8, Full Thread, Bright Finish, Machine Thread, Quantity 25
Feature
Thread Diameter 0.250"Head Diameter 0.477"
82 Degree Countersink - Head Height 0.153"
Phillips Drive #3
18-8 Stainless Steel provides strength and offers good corrosion resistance in many environments.
Description
Machine screws are often used with nuts but also often driven into tapped holes (without nuts). They might be considered a screw or a bolt based on the Machinery's Handbook distinction. In practice, they tend to be mostly available in smaller sizes and the smaller sizes are referred to as screws or less ambiguously as machine screws, although some kinds of machine screw can be referred to as stove bolts. A flat head is A head with flat top and a conical bearing surface (bottom). Designed to be Countersunk. Rod with spiral threads the entire length and with one flat end and a head on other end. Holds object to another object that has a pre-threaded hole, frequently a nut. Usually manufactured from metal. Can be rotated into or out of the object using a screwdriver or wrench.2. 1/4-20 x 3" Flat Head Machine Screws, Phillips Drive, Stainless Steel 18-8, Full Thread, Bright Finish, Machine Thread, Quantity 25
Feature
Thread Diameter 0.250"Head Diameter 0.477"
82 Degree Countersink - Head Height 0.153"
Phillips Drive #3
18-8 Stainless Steel provides strength and offers good corrosion resistance in many environments.
Description
Machine screws are often used with nuts but also often driven into tapped holes (without nuts). They might be considered a screw or a bolt based on the Machinery's Handbook distinction. In practice, they tend to be mostly available in smaller sizes and the smaller sizes are referred to as screws or less ambiguously as machine screws, although some kinds of machine screw can be referred to as stove bolts. A flat head is A head with flat top and a conical bearing surface (bottom). Designed to be Countersunk. Rod with spiral threads the entire length and with one flat end and a head on other end. Holds object to another object that has a pre-threaded hole, frequently a nut. Usually manufactured from metal. Can be rotated into or out of the object using a screwdriver or wrench.3. Lot 4 Each 24" Aluminum T Track 3/4" by 3/8" Slot, Accepts 1/4" Hex Bolts, 1/4" and 5/16" T Bolts, Countersunk Holes Every 6" 112114
Feature
Lot of 4 each 3/4" wide x 3/8" high x 24" long T TrackPrecision extruded aluminum
Thick .100" sidewalls minimize bowing and twisting
Uses standard 1/4" hex heads, 1/4" T bolts and 5/16" T bolts
Counter sunk holes drilled 3" from each end and then every 6" for #6 screws. Screws not included.
Description
T Track has unlimited uses in the shop when making jigs and fixtures used on woodworking and metal working machines. This T track is precision extruded and is 3/8" thick and 3/4" wide. The inside groove will accept standard 1/4 inch hex bolts, 1/4 inch T bolts and 5/16 inch T bolts. Predrilled Countersunk Holes 3" from each end and then every 6". Screws not included.4. 1/4-20 x 3/4" Flat Head Machine Screws, Phillips Drive, Stainless Steel 18-8, Full Thread, Bright Finish, Machine Thread, Quantity 100
Feature
Thread Diameter 0.250"Head Diameter 0.477"
82 Degree Countersink - Head Height 0.153"
Phillips Drive #3
18-8 Stainless Steel provides strength and offers good corrosion resistance in many environments.
Description
Machine screws are often used with nuts but also often driven into tapped holes (without nuts). They might be considered a screw or a bolt based on the Machinery's Handbook distinction. In practice, they tend to be mostly available in smaller sizes and the smaller sizes are referred to as screws or less ambiguously as machine screws, although some kinds of machine screw can be referred to as stove bolts. A flat head is A head with flat top and a conical bearing surface (bottom). Designed to be Countersunk. Rod with spiral threads the entire length and with one flat end and a head on other end. Holds object to another object that has a pre-threaded hole, frequently a nut. Usually manufactured from metal. Can be rotated into or out of the object using a screwdriver or wrench.5. Lot 4 Each, 48" Aluminum T Track 3/4" by 3/8" Slot, Accepts 1/4" Hex Bolts, 1/4" or 5/16" T Bolts, Countersunk Holes Every 6" 112134
Feature
Lot of 4 each 3/4" wide x 3/8" high x 48" longPrecision extruded aluminum
Thick .100" sidewalls minimize bowing and twisting
Uses standard 1/4" hex heads, 1/4" T bolts or 5/16" T bolts
Counter sunk holes drilled 3" from each end and then every 6" for #6 screws. Screws not included.
Description
T Track has unlimited uses in the shop when making jigs and fixtures used on woodworking and metal working machines. This T track is precision extruded and is 3/8" thick and 3/4" wide. The inside groove will accept standard 1/4 inch hex bolts, 1/4 inch T bolts or 5/16 inch T bolts. Predrilled Countersunk Holes 3" from each end and then every 6". Screws not included.6. 48" Aluminum T Track 3/4" by 3/8" Slot, Accepts 1/4" Hex Bolts, 1/4" or 5/16" T Bolts, Countersunk Holes Every 6" 112130
Feature
3/4" wide x 3/8" high x 48" longPrecision extruded aluminum
Thick .100" sidewalls minimize bowing and twisting
Uses standard 1/4" hex heads, 1/4" T bolts or 5/16" T bolts
Counter sunk holes drilled 3" from each end and then every 6" for #6 screws. Screws not included.
Description
T Track has unlimited uses in the shop when making jigs and fixtures used on woodworking and metal working machines. This T track is precision extruded and is 3/8" thick and 3/4" wide. The inside groove will accept standard 1/4 inch hex bolts, 1/4 inch T bolts or 5/16 inch T bolts. Predrilled Countersunk Holes 3" from each end and then every 6". Screws not included.7. Hard-to-Find Fastener 014973239626 Elevator Bolts, 1-1/4-Inch, 10-Piece
Feature
Diameter: 1/4"Length: 1-1/4 inch
Material: Steel
Finish: Zinc
Head Style: Flat Countersunk
Description
We stock a wide variety of fasteners ideal for many applications arround the home, farm, business, automotives, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finsh. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thouroughly and get the opinion of a licensed building or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person.8. Lot 2 Each, 48" Aluminum T Track 3/4" by 3/8" Slot, Accepts 1/4" Hex Bolts, 1/4" or 5/16" T Bolts, Countersunk Holes Every 6" 112132
Feature
Lot of 2 each 3/4" wide x 3/8" high x 48" longPrecision extruded aluminum
Thick .100" sidewalls minimize bowing and twisting
Uses standard 1/4" hex heads, 1/4" T bolts or 5/16" T bolts
Counter sunk holes drilled 3" from each end and then every 6" for #6 screws. Screws not included.
Description
T Track has unlimited uses in the shop when making jigs and fixtures used on woodworking and metal working machines. This T track is precision extruded and is 3/8" thick and 3/4" wide. The inside groove will accept standard 1/4 inch hex bolts, 1/4 inch T bolts or 5/16 inch T bolts. Predrilled Countersunk Holes 3" from each end and then every 6". Screws not included.9. Hard-to-Find Fastener 014973239619 Elevator Bolts, 1-Inch, 8-Piece
Feature
Diameter: 1/4"Length: 1 inch
Material: Steel
Finish: Zinc
Head Style: Flat Countersunk
Description
We stock a wide variety of fasteners ideal for many applications arround the home, farm, business, automotives, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finsh. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thouroughly and get the opinion of a licensed building or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person.10. 24" Aluminum T Track 3/4" by 3/8" Slot, Accepts 1/4" Hex Bolts, 1/4" or 5/16" T Bolts, Countersunk Holes Every 6" 112110
Feature
3/4" wide x 3/8" high x 24" longPrecision extruded aluminum
Thick .100" sidewalls minimize bowing and twisting
Uses standard 1/4" hex heads, 1/4" T bolts or 5/16" T bolts
Counter sunk holes drilled 3" from each end and then every 6" for #6 screws. Screws not included.
Description
T Track has unlimited uses in the shop when making jigs and fixtures used on woodworking and metal working machines. This T track is precision extruded and is 3/8" thick and 3/4" wide. The inside groove will accept standard 1/4 inch hex bolts, 1/4 inch T bolts or 5/16 inch T bolts. Predrilled Countersunk Holes 3" from each end and then every 6". Screws not included.11. Lot 2 Each, 36" Aluminum T Track 3/4" by 3/8" Slot, Accepts 1/4" Hex Bolts, 1/4" or 5/16" T Bolts, Countersunk Holes Every 6" 112122
Feature
Lot of 2 each 3/4" wide x 3/8" high x 36" longPrecision extruded aluminum
Thick .100" sidewalls minimize bowing and twisting
Uses standard 1/4" hex heads, 1/4" T bolts or 5/16" T bolts
Counter sunk holes drilled 3" from each end and then every 6" for #6 screws. Screws not included.
Description
T Track has unlimited uses in the shop when making jigs and fixtures used on woodworking and metal working machines. This T track is precision extruded and is 3/8" thick and 3/4" wide. The inside groove will accept standard 1/4 inch hex bolts, 1/4 inch T bolts or 5/16 inch T bolts. Predrilled Countersunk Holes 3" from each end and then every 6". Screws not included.12. Allstar Performance ALL18632 1/4" x 1" Countersunk Bolt Kit with 1" OD Washer, (Set of 10)
Feature
Countersunk Bolt Kit1/4-20 in Thread
1.000 in Long
Description
Countersunk Bolt Kit1/4-20 in Thread1.000 in LongHex Drive HeadCountersunk Washers/NutsAluminum/SteelNaturalSet of 10Kit includes specially designed aluminum washers which allow the socket head fasteners to install flush with the surface creating a smooth finished look. Many uses include mounting roofs, side skirts, spoilers and replacing sharp edged fasteners inside cockpit. Kits include washers, bolts and nyloc nuts.13. Allstar Performance ALL18633 Black 1/4" x 1" Countersunk Bolt Kit with 1" OD Washer, (Set of 10)
Feature
Countersunk Bolt Kit1/4-20 in Thread
1.000 in Long
Description
Countersunk Bolt Kit1/4-20 in Thread1.000 in LongHex Drive HeadCountersunk Washers/NutsAluminum/SteelBlackSet of 10Kit includes specially designed aluminum washers which allow the socket head fasteners to install flush with the surface creating a smooth finished look. Many uses include mounting roofs, side skirts, spoilers and replacing sharp edged fasteners inside cockpit. Kits include washers, bolts and nyloc nuts.14. 1/4-20 x 3/4" Flat Head Machine Screws, Slotted Drive, Stainless Steel 18-8, Full Thread, Bright Finish, Machine Thread, Quantity 50
Feature
Thread Diameter 0.250"Head Diameter 0.477"
Head Height 0.153"
Description
Machine screws are often used with nuts but also often driven into tapped holes (without nuts). They might be considered a screw or a bolt based on the Machinery's Handbook distinction. In practice, they tend to be mostly available in smaller sizes and the smaller sizes are referred to as screws or less ambiguously as machine screws, although some kinds of machine screw can be referred to as stove bolts. A flat head is A head with flat top and a conical bearing surface (bottom). Designed to be Countersunk. Rod with spiral threads the entire length and with one flat end and a head on other end. Holds object to another object that has a pre-threaded hole, frequently a nut. Usually manufactured from metal. Can be rotated into or out of the object using a screwdriver or wrench.15. Lot 2 Each 24" Aluminum T Track 3/4" by 3/8" Slot, Accepts 1/4" Hex Bolts, 1/4" or 5/16" T Bolts, Countersunk Holes Every 6" 112112
Feature
Lot of 2 each 3/4" wide x 3/8" high x 24" long T TrackPrecision extruded aluminum
Thick .100" sidewalls minimize bowing and twisting
Uses standard 1/4" hex heads, 1/4" T bolts or 5/16" T bolts
Counter sunk holes drilled 3" from each end and then every 6" for #6 screws. Screws not included.