If you looking for frsky taranis receiver then you are right place. We are searching for the best frsky taranis receiver on the market and analyze these products to provide you the best choice.
Reviews
1. FrSky Taranis Compatible Receiver V8R4-II 4-channel 2.4ghz ACCST
Feature
FrSky Taranis Compatible Receiver V8R4-II 4-channel 2.4ghz ACCSTDescription
1) Compatible with all FrSky modules (V8_mode & D_mode), receive only (V8R4-II can talk with module of either mode, but it does not send telemetry information back to the transmitter);2) Wider and higher voltage range (V8R4-II: 3.0~16.0V, V8R4: 3.2~7.6V);3) Longer specified range (V8R4-II: >1km, V8R4: >500m);4) Dimensions: 36*17.5*8mm;5) Weight: 3.5g /2.7g (naked)2. FrSky Taranis Compatible Receiver X6R-148 6-channel 2.4ghz ACCST&SBUS
Feature
1)With external analog telemetry port(AD1), When pins of A1and X (Middle Pin) are connected by the jumper, A1 will change from External Analog2)Telemetry Port to Internal Built-in battery voltage sensor.
3)More number of channels: 1~6ch from conventional channel outputs, 1~16ch from SBUS port.
4)With RSSI PWM output (0~3.3V) on board.
5)Smart Port enabled, realizing two-way full duplex transmission.
Description
X6R receiver features 16 channels (6 normal PWM outputs and all 16 channels on the dedicated Sbus output). It can also work in "D8 Mode to work with the DHT, DJT, DFT and DHT-U transmitter modules. In this mode you have 8 channels. The neat trick is the Smart Port still works in D8 Mode! The X6R can be bound so that it outputs channels 1-6 or 9-14 on the PWM pins. This allows the X6R and X8R to be used in pairs for extended channel outputs.
Model Name:X6R-148
Specifications :
Dimension: 47.42*3.84*14.7mm (L*W*H)
Weight: 15.4g
Antenna:PCB Antenna (Mounted) +150mm Coaxial Antenna with packing
Number of Channels: 16CH (1~6ch from conventional channel outputs, 1~16ch from SBUS port) With RSSI output on board:PWM
voltage output (0~3.3V)
Operating Voltage Range: 4.0~10V
Operating Current: 100mA@5V
Operating Range: full range (>1.5km)
Firmware Upgrade-able
Compatibility: FrSky DFT/DJT/DHT/DHT-U in D_mode
FrSky Taranis X9D Plus/XJT in D8 mode
FrSky Taranis X9D Plus/XJT in D16 mode X6R-EU version only works with FrSky Taranis X9D Plus-EU version/XJT-EU version in D16-EU mode.
Features: 1)With external analog telemetry port(AD1), When pins of A1 and X (Middle Pin) are connected by the jumper, A1 will change from External Analog
2)Telemetry Port to Internal Built-in battery voltage sensor.
3)More number of channels: 1~6ch from conventional channel outputs, 1~16ch from SBUS port.
4)With RSSI PWM output (0~3.3V) on board.
5)Smart Port enabled, realizing two-way full duplex transmission.
3. FrSky Taranis Compatible Receiver D4R-II 4-Channel 2.4ghz ACCST w/ Telemetry & 8 Channel CPPM w/ RSSI
Feature
1) Firmware upgradeable;2) One external analog telemetry port and one digital data-stream port (connect to FrSky Sensor Hub FSH-01);
3) RSSI (PWM) and CPPM output - If CH3 and CH4 are connected by a jumper, CH1 will output CPPM for CH1~CH8, and CH2 will output RSSI (PWM);
4) Lighter weight and physically smaller than D8R-II plus & D6FR;
5) 2.4G FrSky Two Way Receiver
Description
D4R-II is a full featured mini sized 4 channel receiver, The D4R-II's data port allows you to connect a sensor hub so you can connect GPS, Variometer, temperature, RPM and all of the other great FrSky sensors. if the jumper is used on CH3&CH4 it does output a 8 channel PPM stream plus a RSSI voltage signal on channel 2. Perfect for FPV.
Model Name:D4R-II
Compatibility: Compatible with FrSky two way telemetry modules: DFT, DJT, DHT, DHT-U
Specifications:
Dimension: 40*22.5*6mm
Weight: 5.8g / 5g (naked)
Operating Voltage Range: 3.5V-10.0V
Operating Current: 60mA
Operating Range: Full Range (>1.5km) Resolution: 3072 (>11bit)
Features: 1) Firmware upgradeable;
2) One external analog telemetry port and one digital data-stream port (connect to FrSky Sensor Hub FSH-01);
3) RSSI (PWM) and CPPM output - If CH3 and CH4 are connected by a jumper, CH1 will output CPPM for CH1~CH8, and CH2 will output RSSI (PWM);
4) Lighter weight and physically smaller than D8R-II plus & D6FR;
5) Alarm warning on low voltage, poor reception, etc.
4. FrSky Taranis Compatible Receiver X8R 8-channel 2.4ghz ACCST&RSSI&SBUS Easy To Use Receiver
Feature
1)More number of channels: 1~8ch from conventional channel outputs, 1~16ch from SBUS port, or combine two X8R to become a 16 channels receiver.2)Parallel two X8R to become a 16 channel receiver.
3)With RSSI PWM output (0~3.3V)
4)Smart Port enabled, realizing two-way full duplex transmission.
5)FrSky Brand
Description
Model Name:X8R-PCB
Specifications:
Dimension: 46.47*26.78*14.12mm (L *W *H)
Weight: 16.6g
Number of Channels: 16CH (1~8ch from conventional channel outputs, 1~16ch from SBUS port or combine two X8R to become a 16 channels receiver) With RSSI PWM output (0~3.3V)
Operating Voltage Range: 4.0~10V
Operating Current: 100mA@5V
Operating Range: full range (>1.5km)
Firmware Upgradeable
Compatibility: FrSky DFT/DJT/DHT/DHT-U in D_mode FrSky Taranis X9D Plus/XJT in D8 mode
FrSky Taranis X9D Plus/XJT in D16 mode X8R-EU version only works with FrSky Taranis X9D Plus-EU version/XJT-EU version in D16-EU mode.
Features: 1)More number of channels: 1~8ch from conventional channel outputs, 1~16ch from SBUS port, or combine two X8R to become a 16 channels receiver.
2)Parallel two X8R to become a 16 channel receiver.
3)With RSSI PWM output (0~3.3V)
4)Smart Port enabled, realizing two-way full duplex transmission.
5. FrSky Taranis X9D Plus 16-channel 2.4ghz ACCST Radio Transmitter (Mode 2)
Feature
Taranis X9D Plus Transmitter(Mode 2) - US Type ChargerCarry Case and Receiver NOT included
Compatibility: FrSky X series,D series and V8-ll series receives
Channels: Up to 16 channels
Operating Voltage: 6 - 15V(2S,3S Lipos are acceptable)
Description
Model Name:Taranis X9D Plus EU(mode 2) Specifications: Number of Channels: Up to 16 channels Operating Voltage Range:6~15V (2S, 3S Lipos are acceptable) Operating Current: 260mA maximum (both RF module and backlit are on) Operating Temperature: -10~60 Backlight LCD Screen: 212*64, 2 color combinations for select Model Memories: 60 (extendable by SD card) Compatibility: FrSky X series, D series and V8-II series receivers (plus other receivers if an external module is used) Taranis X9D Plus-EU version is only compatible with X series receiver EU version. Features: Quad Ball Bearing Gimbals Receiver Match Audio Speech Outputs (values, alarms, settings, etc.) Real-time Flight Data Logging Receiver Signal Strength Indicator (RSSI) Alerts Super Low Latency Smart Port Supported Vibration Alerts. Notes and Warnings. Please connect the provided battery in the battery compartment before use. The six-cell NiMH battery is for use only in your TARANIS X9D Plus. Be sure to use the built-in battery charger to charge the battery. Be careful not to drop the battery. Don't pull the battery wires as this could produce,short-circuits and cause the battery to explode. Do not remove the battery from the TARANIS X9D Plus transmitter while the voltage warning is blinking as this could cause internal settings and memories to be destroyed. Do not use the transmitter if a "Backup Error" warning occurs. Be sure to turn off the Taranis X9D Plus before charging the battery. The Power Indicator LED will be on during charging, and be off after the charging is finished. Be sure to turn off the power of the transmitter before inserting or removing the MicroSD card. As the MicroSD card is a precision device, do not use excessive force when inserting If model data generated by a transmitter with a new software version is copied to an one with older software, the transmitter may not operate correctly. Before copying the model data, update the destination transmitter to the new software version. Do not expose the MicroSD card to dirt, moisture,water or fluids of any kind. Never remove the MicroSD card or turn off power while entering data. Never store the MicroSD card where it may be subject to strong static electricity or magnetic fields. Do not expose the MicroSD card to direct sunlight, excessive humidity or corrosive environments. Be certain to insert the MicroSD card in the correct direction.6. FrSky Taranis X9D PLUS 2.4ghz Radio Transmitter with Mode2 for FPV
Feature
Taranis X9D plus 16CH 2.4ghz ACCST Radio (Mode II) with EVA CaseIncludes: Radio - Battery - Charger - Neck strap - User manual - EVA Case
RSSI alarms (warns you of reception problems before it becomes an accident)
Quad bearing gimbals that are silky smooth / State-of-the-art open source software (open TX)
Please Note: Receiver not included.
Description
Taranis X9D plus 16CH 2.4ghz ACCST Radio Features: • RSSI alarms (warns you of reception problems before it becomes an accident) • 16 channels (more when combined with external module) • 64 mixers, 9 flight modes • 16 custom curves with 3-17 points each, 32 logic switches • Self-test of the transmitter antenna • 60 Model memory (expandable via a SD card) • Audio Speech outputs • USB and SD card slot for unlimited memory, and firmware upgrades, sound editing. • Long range system capable of up to 3 times the range of current systems • Quad bearing gimbals that are silky smooth • State-of-the-art open source software (open TX) • Super low latency for ultra-quick response (9ms) • Large adjustable backlit blue to white LCD display • Real-time data logging • Receiver lock (program locked to aircraft) • JR Style module bay for additional RF modules • Processor: STM32 ARM Cortex M3 60MHz • New 2000mah battery • Haptic Vibration Feedback Command Feature Specifications: Model name: Taranis X9D Number of Channels: up to 16 Operating Voltage Range:6-15v (2s, 3s Lipos are acceptable) Operating Current: 260mA maximum (both RF module and backlit are on) Operating Temperature: -10~60C Backlit LCD Screen: 212*64 Monochrome Model Memories: 60 (expandable by SD card) Compatibility: FrSky X series, D series and V8-II series receivers stick mode: Mode 2 (Left hand throttle)7. FrSky Taranis X9D Plus US charger
Feature
FrSky Taranis X9D Plus US chargerFrSky Brand
High Quality
15V
New Product
Description
FrSky Taranis X9D Plus US charger8. FrSky 2.4G ACCST Taranis Q X7 16 Channels Transmitter White
Feature
Quad Ball Bearing GimbalsReal-time Flight Data Logging
Receiver Signal Strength Indicator (RSSI) Alerts
Audio Speech Outputs (values, alarms, settings, etc.) (1)
Model configuration files compatible with TARANIS X9D Plus
Description
This is the latest powerful radio system from FrSky, the Taranis Q X7. This is a lightweight feature packed reliable system and it comes in black or white color scheme. The radio includes a Haptic Vibration Feedback System which provides an alternative feedback system to the voice and sound alert warnings. This 16 channel radio has smooth ball bearing gimbals and is loaded with six switches and two knobs. It runs on OpenTX and files can be shared with the popular X9D Plus. The MicroSD card slot offers unlimited model memory options , it also has a USB port for upgrades and to connect to a PC for adjusting settings. Both sticks come with spring loaded return to center sticks, this makes changing from mode 1 to mode 2 extremely easy to set through the menu and the stick can quickly be set to a stationary throttle by unscrewing four screws and removing a spring. One of the best features of the Taranis Q X7 is its full telemetry capability, as well as RSSI signal strength feedback. Wheel and center enter button makes navigating the backlit menu easy and precise. Equipped with an audio jack output and trainer port as well. And of course a module bay for use with JR-type modules that can be used with other protocol receivers and with the use of a FrSky XJT module this radio can support up to 32-channels.
Specifications:- Model Name: Taranis Q X7
- Operating Voltage Range: 6~15V (2S, 3S Lipos are acceptable)
- Operating Current: 210mA maximum (both RF module and backlit are on)
- Operating Temperature: -10~45
- Backlight LCD Screen: 128*64 outdoor readable LCD
- Model Memories: 60 (extendable by SD card)
- Compatibility: FrSky X series, D series and V8-II series receivers (plus other receivers if an external module is used)
9. FrSky Taranis Compatible Receiver X4R 4-channel 2.4ghz ACCST&Telemetry
Feature
Smart Port enabledWith external Analog Telemetry port (AD2)
Lighter weight and physically smaller than X8R and X6R
With RSSI PWM output (0~3.3V) on board
FrSky Brand
Description
X4R receiver features 4 PWM outputs (normal servo) and now includes an option for CPPM output for feeding to flight controllers or other uses. CPPM carries 8 channels on a single servo wire. Smart Port and a traditional A2 port are all located on the side of the receiver and allow you to connect all sorts of great sensors to send data back to your FrSky radio.
Model Name:X4R Specifications
Dimension: 40*22.5*6mm (L*W*H)
Weight: 5.8g
Number of Channels: X4R-4ch from conventional channel outputs, without SBUS port X4RSB-3/16ch (1~3ch from conventional channel outputs, 1~16ch from SBUS channel)
Operating Voltage Range: 4.0~10V
Operating Current: 100mA@5V
Operating Range: full range (>1.5km) With RSSI output on board: PWM voltage output (0~3.3V)
Firmware Upgradeable
Compatibility: FrSky X-series Module (XJT etc. ) & Taranis X9D Plus in D16 mode (X4R / X4RSB is not work with D-series Module)
Features: Smart Port enabled With external Analog Telemetry port (AD2) Lighter weight and physically smaller than X8R and X6R With RSSI PWM output (0~3.3V) on board
10. FrSky Taranis Compatible Receiver V8FR-II 8-channel 2.4ghz ACCST
Feature
Condition:NewOperating voltage: 3.0~16V(HV Version)
Power consumption: 30mA
Dimensions: 44 x 24 x 14 mm
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Please consider you mind or not before buying.
Description
1 x FrSky V8FR-II receiver(HV Version)11. FrSky Taranis 2.4ghz Compatible 2DB Antenna
Feature
FrSky Taranis 2.4ghz Compatible 2DB AntennaFrSky Brand
New Product
High Quality
Easy to Replace
Description
FrSky Taranis 2.4ghz Compatible 2DB Antenna12. FrSky Taranis X9DP EVA case
Description
FrSky Taranis X9DP EVA caseSpecifications:
Brand Name: FrSky
Item Name: FrSky Taranis X9DP EVA case
Package Included: 1 x FrSky Taranis X9DP EVA case
13. FrSky Taranis X9D Plus Transmitter and X8R Receiver with Mode2 for FPV Quadcopters
Feature
FrSky Taranis X9D Plus Transmitter with Mode2 - X8R Receiver - FrSky WarrantyCompatibility: FrSky X series, D series and V8-ll series receives (plus other receivers if an external module is used) FPV Quadcopters
Transmitter: Operating Voltage Range: 6 - 15V (2S,3S Lipos are acceptable)
Transmitter: Operating Current: 270mA maximum (both RF module and backlit are on)
Transmitter: Number of Channels: Up to 16 channels