When you looking for temperature controller 110v, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable temperature controller 110v is not an easy task. In this post, we show you how to find the right temperature controller 110v along with our top-rated reviews. Please check out our suggestions to find the best temperature controller 110v for you.
Reviews
1. KETOTEK STC-1000 Digital Temperature Controller Digital LED Temperature Controller 110V 220V Thermostat Sensor 2 Relay Outpu
Feature
Switch the modes between cool and heatControl temperature by setting the temperature setting value and the difference value
Refrigerating control output delay protection
Alarm when temperature exceeds temperature limit or when sensor error
Description
Features:100% brand new and high quality
modle: STC-1000
Switch the modes between cool and heat; Control temperature by setting the temperature setting value and the difference value; Temperature calibration; Refrigerating control output delay protection; Alarm when temperature exceeds temperature limit or when sensor error.
Technical Parameters:
1.Temperature measuring range: -50 C ~ 99 C
2.Resolution: 0.1 C;
3.Accuracy:+- 1 C (-50 C ~ 70 C);
4.Sensor error delay: 1 minute
5.Power supply: 110-220VAC , 50/60Hz;
6.Power consumption: <3W;
7.Sensor: NTC sensor (1PC);
8.Relay contact capacity: Two Relay Cool 10A/250VAC; Heat 10A/250VAC;
9.Ambient temperature: 0 C ~ 60 C;
10.Storage temperature: -30 C ~ 75 C;
11.Relative humidity: 20% ~ 85% (No condensate)
12.Sensor length: 1.0m
13.13. Front Panel Size: 75x34.5mm Product Size: 75x34.5x85 mm Mounting Size: 71x29mm
Package Included:
1 * Temperature Controller
1 * Temperature sensor
1 * Instruction Manual
2. bayite AC 110V Fahrenheit Digital Temperature Controller 10A 1 Relay with Sensor
Feature
KEEP TEMPERATURE IN DESIRED RANGE: It's on/off control mode. Turn on your device at a degree and turn it off at another degree. The difference of the 2 degrees can be minimum 1 and maximum 25.HEATING OR REFRIGERATION WORKING MODE: Switch between heating mode and refrigeration mode according to the device your need.
LONG SENSOR CABLE: 3m/9.8ft. Size of the WATERPROOF probe head: 4mm*20mm
WIDE RANGE OF USES: seedling heat mat, home brewing, aquarium, pet breeding, incubation, BBQ, fermentation, accelerating germination, electric radiator, electric oven, etc.
With compressor delay protection function for refrigerating control
Description
This is an AC 110V Fahrenheit Digital temperature controller. It can control the power to a freezer to prevent it from getting too cold, or control the power to a terrarium to prevent it from getting too hot, maintain a stable environment.This controller provides heating and cooling modes and temperature alarm function.
For example:
If you choose heating mode, set control Value to 100F, set span value to 10F. The relay will be connected when temp drop to 90F. The relay will be disconnected when temp reaches 100F;
If you choose cooling mode, set control Value to 100F, set span value to 8F. The relay will be connected when temp reaches 108F. The relay will be disconnected when temp drops to 100F
Specification:
1.Power supply for the controller: AC 110V, 50/60Hz
2.Temperature unit: Fahrenheit, Measure range: -4 ~ 220F
3.Temperature measure resolution: 1
4.Accuracy: 0.5
5.Working mode: Heating OR Cooling mode
6.Slew range of temp controlling: 1 - 25(Max temp span between ON and OFF)
7.Control resolution: 1(Minimum temp span between ON and OFF)
8.Power consumption: less than 3W
9.Relay contact capacity: 10A/250VAC, 10A/110VAC
10.Data retention: Yes
11.Compressor delay protection: YES
12.Product size:8.5*7.5*3.5cm / 3.4*3*1.4in
13.Sensor Cable length: 3m/9.8ft
Package Content:
1x Digital Temperature controller
3. Temperature Controller bayite BTC201 Pre-Wired Digital Outlet Thermostat, 2 Stage Heating and Cooling Mode, 110V - 240V 10A
Feature
Manual has been updated for easier comprehension. This controller uses independent heating and cooling toggling points to keep your environment in the ideal temperature rangeControls both a heating and cooling/refrigeration device at the same time. This controller can also be used to easily control a single heating or cooling device
Waterproof sensor, high/low temperature alarm, and automatic power-on delay to protect compressors
MAX LOAD: 1100W at 110V. Celsius or Fahrenheit Read-out
WIDE RANGE OF USES: seedling heat mat, home brewing, beer brewing, aquarium heater, pet breeding, incubation, BBQ, fermentation, accelerating germination, electric radiator, electric oven, heat mat, etc
Description
The BTC201 temperature controller can turn on/off an electric appliances at desired temp.For example, you can use the controller to turn on/off a heater and a fridge to keep temp around 100 F. Turn on heater at 98.5 F. Turn on fridge at 105 F. Turn off the heater/fridge when temp reaches 100 F. The setting is (SV=100, Cd=5, Hd=1.5). the controller itself doesn't change temp.
Main features:
1-YEAR Warranty
Plug and play.
Maximum load: 1100W @110V or 2200W @220V(Not compatible with the 2 hot line 220V plug).
On/Off Control, Heating and Cooling
Celsius or fahrenheit read-out.
Temperature calibration.
Compressor delay protection time setting.
High and low temperature alarms are available(You can use this feature to alarm you when the temperature overshoots your desired temperature)
Specification:
1.Power supply: AC 110V 50/60Hz
2.Measure range: -58F ~ 230F / -50C ~ 110C
3.Temperature resolution: 0.1
4.Accuracy: 0.5
5.Working mode: Heating and Cooling mode
6.Max span between turn-on degree and turn-off degree is 25
7.Control resolution: 0.1
8.Power consumption: less than 3W
9.Relay contact capacity: 10A
10.Store setting after power off: YES
11.Compressor delay protection: YES
12.High and Low Temperature alarm: Yes
13.Product size: 4.9x4.5x1.9 inch (12.5x11.5x5 cm)
14.Sensor Cable length: 3m(9.8ft)
Advanced function:
1.Switch temperature unit(Default: F): F or C
2.Switch resolution(Default:0.1): 0.1 or 1
Package Content:
1x BTC201 Temperature controller
1x sensor cable
1m/3.3ft power cord
4. Inkbird Itc-308 Digital Temperature Controller Outlet Thermostat, 2-stage, 1100w, w/ Sensor
Feature
Plug and play design, easy to use;Dual relay output, be able to connect with refrigeration and heating equipment at the same time
Support reading with Centigrade or Fahrenheit unit
Maximum output load: 1100W(110V)
Dual display window, be able to display measured temperature and set temperature at the same time
Description
Main features:Plug and play design, easy to use;
Dual relay output, be able to connect with refrigeration and heating equipment at the same time;
Support reading with Centigrade or Fahrenheit unit;
Maximum output load: 1100W(110V);
Dual display window, be able to display measured temperature and set temperature at the same time;
Temperature calibration;
Compressor delay protection for refrigeration control
High and low temperature alarms are available;
Over-temperature and sensor fault alarm
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
Specification
Temperature Control Range : -50~99 C / -58~210 F
Temperature Resolution: 0.1 C / 0.1 F Temperature Accuracy: 1C (-50 ~ 70C) / 1F (-50 ~ 160 F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Dimension Body: 140x68x33mm (5.5x2.7x1.3inch)
Socket: 85x42x24mm(3.3x1.7x1inch)
Ambient Temperature: -30~ 75 C / -22~ 167 F
Storage Temperature: -20~ 60 C / -4~ 140 F
Humidity 20~85% (No Condensate)
Warranty: 1 Year
Package Content:
1x ITC-308 temperature controller;
1x Manual
Note: This listing sensor's probe dimension is 50mm x 6mm. If you want 12" probe sensor, you can search on Amazon and buy one by ASIN: B01A6DIPFM or ASIN: B01A51OLR6.
5. bayite Temperature Controller 1650W BTC211 Digital Outlet Thermostat, Pre-wired, 2 Stage Heating and Cooling Mode, 110V - 240V 15A
Feature
Manual has been updated for easier comprehension. This controller uses independent heating and cooling toggling points to keep your environment in the ideal temperature rangeControls both a heating and cooling/refrigeration device at the same time. This controller can also be used to easily control a single heating or cooling device
Waterproof sensor, high/low temperature alarm, and automatic power-on delay to protect compressors
MAX LOAD: 1650W at 110V or 3300W at 220V. (Celsius or Fahrenheit Read-out)
WIDE RANGE OF USES: seedling heat mat, home brewing, aquarium, pet breeding, incubation, BBQ, fermentation, accelerating germination, electric radiator, electric oven, etc
Description
The BTC211 (BTC200 Series) temperature controller can turn on/off an electric appliances at desired temperature.And the operation has been simplified for ease of use.
For example, you can use the controller to turn on/off a heater and a fridge to keep temp around 100 F. Turn on heater at 98.5 F. Turn on fridge at 105 F. Turn off the heater/fridge when temp reaches 100 F. The setting is (SV=100, Cd=5, Hd=1.5). Please note that the controller itself doesn't change temp.
Main features:
1-YEAR Warranty
Plug and play. No worry about wiring.
Maximum load: 1650W @110V or 3300W @220V(Not compatible with the 2 hot line 220V)
On/Off Control, Heating and Cooling
Celsius or fahrenheit read-out.
Temperature calibration.
Compressor delay protection time setting.
High and low temperature alarms are available(This is a useful function. You can use this feature to alarm you when the temperature overshoots your desired temperature)
Specification:
1.Power supply: AC 110V ~ 240V, 50/60Hz
2.Measure range: -58F ~ 230F / -50C ~ 110C
3.Temperature resolution: 0.1
4.Accuracy: 0.5
5.Working mode: Heating and Cooling mode
6.Max span between turn-on degree and turn-off degree is 25
7.Control resolution: 0.1
8.Power consumption: less than 3W
9.Relay contact capacity: 15A
10.Store setting after power off: YES
11.Compressor delay protection: YES
12.High and Low Temperature alarm: Yes
13.Product size: 4.9x4.5x1.9 inch (12.5x11.5x5 cm)
14.Sensor Cable length: 3m(9.8ft)
Advanced function:
1.Switch temperature unit(Default: F): F or C
2.Switch resolution(Default:0.1): 0.1 or 1
Package Content:
1x BTC211 Temperature controller
1x sensor cable
1x power cord (0.97m/3.2ft)
6. Inkbird Pre-Wired Dual Stage Digital Temperature Controller Outlet Thermostat 110V, 1100W Heating and Cooling for Fermentation Kegerator Heating Mat ect
Feature
Simple to use: plug it in, set the temp ranges, place the probe, plug in the heater/cooler into the marked outlet.Be able to connect with refrigeration and heating equipment at the same time.
Easily calibrated.
Can display in Centigrade or Fahrenheit.
Whether you need temperature control for fermentation, greenhouse, kombucha control or to set up your temperature project system, the ITC-308 temperature controller is a great choice.
Description
Features:Temperature Control Range : -50~99 C / -58~210 F
Temperature Resolution: 0.1 C / 0.1 F Temperature
Accuracy: 1C (-50 ~ 70C) / 1F (-50 ~ 160 F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Dimension Body: 140x68x33mm (5.5x2.7x1.3inch)
Socket: 85x42x24mm(3.3x1.7x1inch)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Buzzer Alarm: High and Low Temperature Alarm
Temperature calibration
Over-temperature and sensor fault alarm
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
Sensor Type: NTC sensor (Including)
Ambient Temperature: -30~ 75 C / -22~ 167 F
Storage Temperature: -20~ 60 C / -4~ 140 F
Humidity 20~85% (No Condensate)
Warranty: 1 Year
It has certificate of EMC, LVD, RoHS, FCC compliance.
Package Content:
1x Temperature controller ITC308
1x Manual
7. Origin Elitech STC-1000 110V Digital Temperature Controller Centigrade Thermostat w Sensor 2 Relays
Feature
Temperature calibration; Refrigerating control output delay protection.Auto switch between refrigerating and heating,retrun difference value.
Control temperature by setting the temperature setting value and the difference value.
Alarm when temperature exceeds temperature limit or when sensor error..
Accuracy: 1C (-50~70C)
Description
Elitech is the origin manufacturer of STC1000 from 2005. This is the only official Amazon store sold STC1000 with the right wire diagram.Specification and Size:
1.Front panel size75(L)34.5(W)mm;
2.Mounting size:71(L)29(W)mm;
3.Product size75(L)34.5(W)85(D)mm;
4.sensor length2minclude the probe.
Technical Parameters:
1. Temperature measuring range: -50~99C;
2. Resolution: 0.1C; 3. Accuracy: 1C (-50~70C);
4. Sensor error delay: 1 minute
5. Power supply: 110VAC10%, 50/60Hz;
6. Power consumption: 3W;
7. Sensor: NTC sensor (1PC);
8. Relay contact capacity: Cool 10A/250VAC;Heat 10A/250VAC;
9. Ambient temperature: 0~60C;
10.Storage temperature: -30~75C;
11.Relative humidity: 20%~85% (No condensate).
Package Content:
1 x STC-1000 Temperature controller 110v
1 x 2M Sensorv
Note to check whether the sensor is connected well. Please be sure to connect the heating relay.
FAQ:
1, Does not read temperature at all?
A: 1. Check whether the sensor is connected well. 2. Check your wiring diagram. Most of customers don't wire it right and think the unit is bad. The right wired diagram is displayed in pictures.
2. Cooling relay not activating ?
A: Cooling has the delay function. We set the default value as 3 minutes. When the heating turns off, the cooling will be on after 3 minutes. If the customers want it turns on immediately, you can set it as 0.
8. Inkbird All-Purpose Digital Temperature Controller Fahrenheit &Centigrade Thermostat w Sensor 2 Relays
Feature
Fahrenheit and Celsius Display Can Be ChooseAlarm When Temperature Exceeds the Limit or When Sensor Error
2 Relays, Switch Between Cooling and Heating Modes
Control the Temperature by Setting the Temperature Set Value and the Difference Value
Temperature Calibrating, Refrigerating control output delay protection
Description
Inkbird All-Purpose Digital Temperature Controller Fahrenheit &Centigrade Thermostat w Sensor Cooling/HeatingMounting dimension:
Front Panel Size: 75(L)*34.5(W)mm Mounting Size: 71(L)*29(W)mm
Product Size75(L)*34.5(W)*85(D)mm Sensor Length: 2m (include the probe)
Technical Parameter:
Output: 2 Relays
Temperature Measuring Range: -50210 oF / -50 oC-99 oC
Resolution: 0.1 oF / 0.1 oC
Accuracy: 1 oF-50 oF -160 oF/ 1 oC-50 oC -70 oC
Power Supply: 110VAC 50Hz/60Hz
Power Consumption: 3W
; Sensor: NTC Sensor
Relay Contact Capacity: Cooling (10A/250VAC)/ Heating (10A/250VAC);
Ambient Temperature: 0 oC-60 oC
Storage Temperature: -30 oC-75 oC
Relative Humidity: 20-85% (No Condensate)
Package Content:
1x ITC-1000 Temperature controller 110v with 6.67 NTC Sensor
FAQ:
1. How to wire? Q: I can hear the relay inside the unit click, but I can't get any voltage on the cool or heat terminals.
A: IMPORTENCE: Please don't forget to wire the Heating and Cooling device to Power supplier and make a circuit.
2. Q: The cooling device doesn't work, even though the temperature reaches TS+DS, and the Cool indicator lamp is flashing.
A: The cooling has delay function. If you want to run immediately and don't need the PT function, you can set PT=0.
9. Lerway 110V All-Purpose Temperature Control Controller with Sensor 2 Relay Output Thermostat Stc-1000
Feature
All-purpose Temperature ControllerAuto switch between refrigerating and heating
Retrun difference value
Measure range:-50~+99C
Accuracy: 1C(-50C~70C)
Description
Detailed Product DescriptionMeasure range:-50~+99C
Mounting size:71*29mm
Auto switch between refrigerating and heating
Retrun difference value
All-purpose Temperature Controller STC-1000:
Features:
Switch the modes between cool and heat; Control temperature by setting the temperature setting value and the difference value; Temperature calibration; Refrigerating control output delay protection; Alarm when temperature exceeds temperature limit or when sensor error.
Specification and Size:
1.Front panel size75(L)34.5(W)mm;
2.Mounting size:71(L)29(W)mm;
3.Product size75(L)34.5(W)85(D)mm;
4.sensor length2minclude the probe.
Technical Parameters:
1. Temperature measuring range: -50~99oC;
2. Resolution: 0.1C; 3. Accuracy: 1C (-50~70C);
4. Sensor error delay: 1 minute
5. Power supply: 110VAC10%, 50/60Hz;
6. Power consumption: 3W;
7. Sensor: NTC sensor (1PC);
8. Relay contact capacity: Cool 10A/250VAC;Heat 10A/250VAC;
9. Ambient temperature: 0~60C;
10.Storage temperature: -30~75C;
11.Relative humidity: 20%~85% (No condensate).
Package Content:
1PCS STC-1000 Temperature controller 110v
10. Inkbird Pre-wired Plug Digital Humidity Controller AC 110V - 240V w/ Sensor for Humidifier Dehumidifier
Feature
Control humidity by setting value and differential value;Delay protection for Control output; Query current temperature;
Switch the modes between humidification and dehumidification automatically;Calibrate the humidity value;
Alarm when sensor error or humidity exceeds limit;
Alarm when humidity exceeds high/low humidity setting value;
Description
IHC-200 is an easy-to-use, safe and reliable dual relay output humidity controller. Its play-n-plug designed, dual LED screens enabling more humanized. IHC-200 can control any 100-265 volt humidifier, dehumidifier or fan.Feature:
Power Input: 100 ~240VAC, 50Hz/60Hz
Power Output: Max. 10A, 100V ~240V AC
Humidity Measuring Range : 5%-99.99%RH
Humidity Control Range : 5%-99%RH
Resolution: 1%RH
Accuracy: 3%RH
Sensor model: AM-2301
Sensor stability: <0.5%RH/yr
Sensor Length2m / 6.56ft
Relay Contact Capacity
Humidification (12A, 100-240VAC)
Dehumidification (12A, 100-240VAC)
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Dimension: Body: 140x68x33mm (5.5x2.7x1.3inch)
Socket: 85x42x24mm(3.3x1.7x1inch)
Ambient Temperature : -30~ 75 C / -22~ 167 F
Storage: Temperature -30~ 75 C / -22~ 167 F
Humidity 20~85% (No Condensate)
Warranty: 1 Year
Package included:
1 x IHC200 humidity controller
1 x User manual
11. Lerway 110V All-Purpose Temperature Controller+ Sensor 2 Relay Output Thermostat Stc-1000
Feature
Temperature calibration; Refrigerating control output delay protectionAuto switch between refrigerating and heatingRetrun difference value
Control temperature by setting the temperature setting value and the difference value
Alarm when temperature exceeds temperature limit or when sensor error.
Note to check whether the sensor is connected well. Please be sure to connect the heating relay.
Description
Specification and Size:1.Front panel size75(L)34.5(W)mm;
2.Mounting size:71(L)29(W)mm;
3.Product size75(L)34.5(W)85(D)mm;
4.sensor length2minclude the probe.
Technical Parameters:
1. Temperature measuring range: -50~99oC;
2. Resolution: 0.1C; 3. Accuracy: 1C (-50~70C);
4. Sensor error delay: 1 minute
5. Power supply: 110VAC10%, 50/60Hz;
6. Power consumption: 3W;
7. Sensor: NTC sensor (1PC);
8. Relay contact capacity: Cool 10A/250VAC;Heat 10A/250VAC;
9. Ambient temperature: 0~60C;
10.Storage temperature: -30~75C;
11.Relative humidity: 20%~85% (No condensate).
Package Content:
1 x STC-1000 Temperature controller 110v
1 x 2M Sensor
Note to check whether the sensor is connected well. Please be sure to connect the heating relay.
FAQ:
1, Does not read temperature at all?
A: 1. Check whether the sensor is connected well. 2. Check your wiring diagram. Most of customers don't wire it right and think the unit is bad. The right wired diagram is displayed in pictures.
2. Cooling relay not activating ?
A: Cooling has the delay function. We set the default value as 3 minutes. When the heating turns off, the cooling will be on after 3 minutes. If the customers want it turns on immediately, you can set it as 0.
12. Inkbird Digital 110V, 1100W Only Heat Temperature Controller 10-42C / 50-108F with NTC Sensor, and Display c206
Feature
Plug and play design, easy to use. ONLY FOR HEATING, NO COOLING.Centigrade or Fahrenheit selection.
IP68 waterproof NTC Probe.
The temperature calibration (to calibrate the temp if it's measuring incorrectly)
The stainless steel diameter: 40mm x 5mm/1.57" x 0.2"
Description
Description:
ONLY FOR HEATING, NO COOLING.
Plug and play design, easy to use;
Support reading with Centigrade or Fahrenheit
Three display window, be able to display measured temperature and the low and high temperature at the same time
Temperature calibration
Keep your desire temperature for your seed heat mat, aquarium heater, brewing heater ect.
It can be shut off to protect against overheating
The NTC Probe is waterproof. It is IP68.
The stainless steel diameter: 40mm x 5mm/1.57" x 0.2"
Feacture:
Input: 100~265VAC 50/60HZ Maximum Current: 10A
Maximum Power: 1100W (110V) /2300W230V
Temperature Control Range:10-42C / 50-108F
Ambient Temperature: -30~75 C-22F~167F
Dimension: 93(L)*63(W)*34(H) mm (3.66(L)*2.48(W)*1.34(H) in)
Package included:
1 x Only Heat Temperature Controller C206
1 x 6.56FT Sensor
1 x Manual
13. DIGITEN Digital LCD Thermostat Pre-wired Temperature Controller Heating Cooling 2 Stage Outlet
Feature
Large LCD screen, glare free and eye protected, plug and play design, easy to read and programmeThe temperature sensor is made of silicone, is waterproof with high quality, high-accuracy
Dual relay output,can control heating and refrigeration equipment at the same time
Support reading with Centigrade or Fahrenheit unit
Max output load: 1000W@110V, 2200W@220V, max current: 10A
Description
Features:Large LCD screen, glare free and eye protected;
Dual relay output, control heating and refrigeration equipment at the same time;
Support reading with Centigrade or Fahrenheit unit;
Max current: 10A;
Max output load: 1000W@110V, 2200W@220V;
Easy to use and program, Plug and play device;
Built-in a temperature correction function;
Delay starting protection for refrigerating compressor;
High and low temperature alarms are available;
Over-temperature and sensor fault alarm;
Heating/Cooling differential could be set separately for refrigeration and heating to protect temperature controller from violent change;
Can use heating or cooling function separately.
Specifications:
Power Supply: 100-240VAC 50/60HZ
Temperature Control Range: -40~120-40~248
Temperature Control Mode: Heating and Cooling
Temperature Resolution: 0.1, 0.1
Temperature Accuracy: 11
Buzzer Alarm: High and Low Temperature Alarm
Input sensor: NTC Waterproof, sensor length:Approx 2m(6 fts)
Input Power Cable Length: 1m (3ft)
Input Power Cable Length: 120 cm
Output Power Cable Length: 30cm
Controller Dimension: 137*65*28mm
Packaging include:
1 x DTC-102 Temperature Controller
1 x NTC sensor
1 x Manual