If you looking for 12a esc blheli then you are right place. We are searching for the best 12a esc blheli on the market and analyze these products to provide you the best choice.
Reviews
1. BLHeli-S 4-in-1 12A ESC Electric Speed Controller 2-3s LiPo Support Dshot 150/300/600 for FPV Racing Drone Multirotor
Feature
Small size: 20x20mm mounting holes, ultra Lightweight, and compact sizeNew BusyBee2 MCU at 48MHz, up to 500k eRPM support, improved firmware using BLHeli_S
Supports Oneshot125 (125-250us), Oneshot42(41.7-83.3us) and Multishot (5-25us). Auto-detection, DSHOT compatible
2-3s LiPo battery compatible, adaptive timing, compatible with a wide range of motors and Kv
Sychronous rectification technology adds efficiency, damped light
Description
BLHeli-S 4-in-1 12A ESC Electric Speed Controller 2-3s LiPo Support Dshot 150/300/600 for FPV Racing Drone MultirotorSpecification
Item: BLHELI-S 4-in-1 12A ESC
Con.Current: 12A
Peak Current(10s): 15A
BEC: NO
Lipo: 2-3S
Programming: YES
Weight: About 7.5g
Size(PCB): 27*27mm
M3 mounting hole20mm x 20mm
Features:
Chips on EFM8BB21F16, 48MHZ Greatest.
BLHeli_S firmware is the next generation code, following the base BLHeli code.
BLHeli_S is designed for superior performance in multirotors, and uses hardware generated motor pwm for smooth throttle response and silent operation.
Small size combined with light weight for easy installation.
The code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us) , Multishot (5-25us) and Dshot.
The input signal is automatically detected by the ESC upon power up.
All codes use damped light mode.Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
The code supports features to prevent sync loss. There are tuneable parameters that can make the code run well even in the most demanding situations, although default settings will work.
Excellently in normal operating environments.
The code also supports a beacon functionality, where the ESC will start beeping after a given time of zero throttle. This can be very useful for finding lost crafts.
Package Including
1 * BLHeli-S 4-in-1 12A ESC
2. Hobbypower Emax BLHeli 12A ESC Speed Controller for Mini FPV QAV210 QAV250 Quadcopter Drone
Feature
With low voltage, overheat protection and self detection functionParameter adjustable by programer or remote controller
Throttle stroke adjustable, compatible with different receivers.
Built-in linear BEC
Suitable for mini FPV drone QAV180/QAV210/QAV250/QAV270/QAV280 quadcopter
Description
Blheli firmware- With low voltage, overheat protection and self detection function
- Max.support rotation speed: 210,000rpm/2-pole; 70,000rpm/6-pole; 35,000rpm(12-pole)
- MCU and BEC with independant regulator
- Parameter adjustable by programer or remote controller
- Throttle stroke adjustable, compatible with different receivers.
- Built-in linear BEC
Features
- Use authentic electronic components to ensure high quality and enhance the current endurance ability of the ESC.
- Based on BLHeli firmware,optimized for high performance with great linearity and much quicker throttle response.
- Special designed for multirotors, and compatible with great linearity and much quicker throttle response.
- Multiple protection featured including Low-voltage vut-off protection/ over-heat protection/ throttle signal loss protection.
- Throttle tange can be configured and is full compatible with all receivers, providing smooth with all receivers,providing smooth,linear and precise throttle reponse.
- All parameters can be programmed via using a program card or a transmitter,including default settings.
- Suitable for mini FPV drone QAV180/QAV210/QAV250/QAV270/QAV280 quadcopter
Specification
- Item:EMAX Blheli 12A
- Continuous Current:12A
- Burst current(10S):15A
- Li-po battery: 2-4S
- Dimension L*W*H(mm):40x20x8
- Weight wires Included:11g
- BEC Mode: Linear
- BEC Output:1A/5A
- Programmable:yes
Package includes
1x EMAX BLHeli 12A esc
1x Mnaual
3. Hobbypower Emax BLHeli 12A ESC Speed Controller for Mini FPV QAV210 QAV250 Quadcopter (pack of 4 pcs)
Feature
With low voltage, overheat protection and self detection functionParameter adjustable by programer or remote controller
Throttle stroke adjustable, compatible with different receivers.
Built-in linear BEC
Suitable for mini FPV drone QAV180/QAV210/QAV250/QAV270/QAV280 quadcopter
Description
Blheli firmware- With low voltage, overheat protection and self detection function
- Max.support rotation speed: 210,000rpm/2-pole; 70,000rpm/6-pole; 35,000rpm(12-pole)
- MCU and BEC with independant regulator
- Parameter adjustable by programer or remote controller
- Throttle stroke adjustable, compatible with different receivers.
- Built-in linear BEC
Features
- Use authentic electronic components to ensure high quality and enhance the current endurance ability of the ESC.
- Based on BLHeli firmware,optimized for high performance with great linearity and much quicker throttle response.
- Special designed for multirotors, and compatible with great linearity and much quicker throttle response.
- Multiple protection featured including Low-voltage vut-off protection/ over-heat protection/ throttle signal loss protection.
- Throttle tange can be configured and is full compatible with all receivers, providing smooth with all receivers,providing smooth,linear and precise throttle reponse.
- All parameters can be programmed via using a program card or a transmitter,including default settings.
- Suitable for mini FPV drone QAV180/QAV210/QAV250/QAV270/QAV280 quadcopter
Specification
- Item:EMAX Blheli 12A
- Continuous Current:12A
- Burst current(10S):15A
- Li-po battery: 2-4S
- Dimension L*W*H(mm):40x20x8
- Weight wires Included:11g
- BEC Mode: Linear
- BEC Output:1A/5A
- Programmable:yes
Package includes
4x EMAX BLHeli 12A esc
4. Hobbyking - Favourite Sky 3 Quattro 4 x 12A Brushless Quadcopter ESC 2-4S 1A BEC BLHeli
5. Emax BLHeli 12A 2-4S Brushless ESC for FPV RC Multicopters
Feature
Emax BLHeli 12A 2-4S Brushless ESC for FPV RC MulticoptersDescription
Emax BLHeli 12A 2-4S Brushless ESC for FPV RC Multicopters6. EMAX D-SHOT Bullet Series 12A ESC BLHELI_S FPV Drone Speed Controller
Feature
Brand new Bullet Series (purple), super-mini, ultra-light ESC.BLHeli-S firmware/ Supports DSHOT, MULTISHOT, ONESHOT42, ONESHOT125.
New heat sink design both effectively reduces the core temperature, and avoids propeller strike damage.
Imported MOS tube, Japanese ceramic capacitors, 3oz High-TG PCB board, significantly reduces electrical heat soak and improves system efficiency.
Description
Emax NEW FPV ESC brand new bullet serisepurple, super-mini, ultra-light ESC, BLHeli-S firmware/supports DSHOT MULTSHOT, ONESHOT42, ONESHOT 125 New heat sink design both effectively reduces the core temperature,and avoids propeller strike damage. Key Features: The market's lightest and smallest ESC, designed specifically for high-level FPV racing. Utilizing the latest BLHeli-S firmware (16.5), hardware PWM generates a signal to boost smoother throttle response and reduce noise. Supports new digital signal: DSHOT, and analog signals: MULTISHOT, ONESHOT42, ONESHOT125. Top quality MOSFET, ceramic capacitors. 3oz high TG PCB board, significantly improves heat dissipation and improves system efficiency. New aluminum heat sink, offers protection from propeller strike damage. Features high-temperature silicone signal cable for wire flexibility and ease of installation.7. Hobbypower Emax BLHeli 12A ESC Speed Controller for Mini FPV QAV210 QAV250 Quadcopter Drone
Feature
With low voltage, overheat protection and self detection function.Parameter adjustable by programer or remote controller
Throttle stroke adjustable, compatible with different receivers.
Built-in linear BEC.
Suitable for mini FPV drone QAV180/QAV210/QAV250/QAV270/QAV280 quadcopter.
Description
Blheli firmware- With low voltage, overheat protection and self detection function
- Max.support rotation speed: 210,000rpm/2-pole; 70,000rpm/6-pole; 35,000rpm(12-pole)
- MCU and BEC with independant regulator
- Parameter adjustable by programer or remote controller
- Throttle stroke adjustable, compatible with different receivers.
- Built-in linear BEC
Features
- Use authentic electronic components to ensure high quality and enhance the current endurance ability of the ESC.
- Based on BLHeli firmware,optimized for high performance with great linearity and much quicker throttle response.
- Special designed for multirotors, and compatible with great linearity and much quicker throttle response.
- Multiple protection featured including Low-voltage vut-off protection/ over-heat protection/ throttle signal loss protection.
- Throttle tange can be configured and is full compatible with all receivers, providing smooth with all receivers,providing smooth,linear and precise throttle reponse.
- All parameters can be programmed via using a program card or a transmitter,including default settings.
- Suitable for mini FPV drone QAV180/QAV210/QAV250/QAV270/QAV280 quadcopter
Specification
- Item:EMAX Blheli 12A
- Continuous Current:12A
- Burst current(10S):15A
- Li-po battery: 2-4S
- Dimension L*W*H(mm):40x20x8
- Weight wires Included:11g
- BEC Mode: Linear
- BEC Output:1A/5A
- Programmable:yes
Package includes
1x EMAX BLHeli 12A esc
1x Mnaual
8. Emax F3 Magnum | Mini Tower System 20x20mm 3-4S BLheli_S 12A 4 In 1 ESC + F3 Flight Controller OSD
Feature
Mounting size: 20x20mmDesigned for high performance Micro FPV racers, the F3 Magnum Mini packs in a F3 processor, Betaflight OSD and 12A 4 in 1 ESC that can handle up to 4s batteries. MPU6000 gyro is a proven performer for stable flight and resistance to vibration noise.
The FC and ESC with neatly stack together with pinned interconnects that make your build easy to assemble and cleaner looking. This tightly pre-assembled package will fit any frame that has 20 x 20mm mounting hole spacing.
The F3 Magnum Mini is the fastest way go from starting a new micro build to FPV Flight!
4 in 1 Main Board - F3 FC + Betaflight OSD + 5v Regulator + Buzzer
Description
Package included:1 x F3 flight controller
1 x BLheli_S Bullet 12A 4 In 1 ESC
1 x JST power wire with connector
4 x M2 nylon nut
4 x M2 x 6mm nylon post
4 x M2 x 5mm nylon post
4 x M2 x 5mm nylon screw
The heart of the flight control systems is a powerful STM32F303 MCU and MPU6000 gyro flashed with Betaflight for proven rocksteady flight stability. The integrated 5v/3A voltage regulator means clean power for all the FC/OSD components and other attached boards such as VTX, RX and FPV Camera. Betaflight OSD with easily customizable layout of vital flight information and ability to change FC flight parameters. On board buzzer for battery level warning or lost model finder functions.
9. Hobbypower Unassembled DIY 250 Mini 250mm Quadcopter Frame Kit + Hobbypower T2204 2300KV Motor +BLHeli 12A ESC + CC3D FC Flight Controller +5045 Props Propeller
Feature
This kit is a very popular Mini Drone.Easy to built, it has a strong rack, beautiful appearance, and a stable structure for smooth flight, it is the best choice for play and FPV.
Preferred by Knowledgeable Model Hobbists & R/C Enthusiasts
Unassembled,need remote control system and battery to complete.
Important note:If you are use 12A esc,pls replace the battery to 2S Lipo,DO NOT USE 3S,easy to burnt.
Description
This is a DIY QAV250 Quadcopter, it is unassembled, come with Hobbypower T2204 motor and EMAX BLHeli 12A esc .This kit is a very popular Mini Drone, it has a strong rack, beautiful appearance, and a stable structure for smooth flight, it is the best choice for play and FPV.
The kit includes:
1 x QAV250 Full carbon frame kit
4 x HP T2204 2300KV Brushless motor(2pcs CW +2pcs CCW)
4 x Emax BLHeli 12A Speed Controller
4 x 5045(CW+CCW) Propeller ( 2pair red, 2pair black)
1 x CC3D Flight Controller & protect case
1 x Matek Power Hub
1 x Spare parts pack
Note:Please be note this kit need remote control and battery to complete. we recommend 6CH above radio system and 3S 1000mah to 1800mah lipo battery.
10. HobbyKing KINGKONG 12A OPTO ESC BLHeli (2-4S) (4pcs) Combo Pack w/UBEC and Programing Adapter