If you looking for pcb etching kit then you are right place. We are searching for the best pcb etching kit on the market and analyze these products to provide you the best choice.
Reviews
1. 10pcs 3.175mm 30 Degree 0.4mm CNC Router Conical Flat Tool PCB Engraver Flat Bottom Cutter
Feature
Shank diameter: 3.175mm / 1/8"Degree: 30 Degree
Cutting edge diameter: 0.4mm
This set of V-shape carbide flat bottom engraving bits is perfect replacements for your CNC/PCB machinery
Description
100% Brand new , never usedThis set of V-shape carbide flat bottom engraving bits is perfect replacements for your
CNC/PCB machinery, make you enjoy a precise, easy cutting experience.
Specification:
High efficiency & large capacity Chip elimination
Product Type: Flat bottom engraving bits
Shank diameter: 3.175mm / 1/8"
Cutting edge diameter:0.4mm
Total length: 32mm
Shape: V-shape
Degree: 30 Degree
Weight: 38g
Material: solid carbide
Application: Majority of plastics ,Wood,Fibre glass,Carbon,PCB board such as circuit boards,most plastic such as Acrylic ABS,Metal such as aluminum.
Package include: 10pcs Carbide CNC Engraving Cutter
2. MG Chemicals Ferric Chloride Copper Etchant Solution, 1 liter Liquid Bottle
Feature
Copper etchantMore aggressive than persulphate alternative
Can be stored and reused
Ready to use solution designed for etching printed circuit boards and other metals
Recommended for use with M.G. Chemicals professional etching process kit and M.G. economy etching process kit
Description
Copper etchant. More aggressive than persulphate alternative. Can be stored and reused. Ready to use solution designed for etching printed circuit boards and other metals. Recommended for use with M.G. Chemicals professional etching process kit and M.G. economy etching process kit. Ferric chloride (FeCl3) liquid solution phase. 1.4 specific gravity. 162.21 Molecular weight. Dark brown appearance. 106 degree C boiling point. 1.0 - 2.0 pH (5 percent by volume). 0 degree C freezing point. 100 grams/liter maximum copper holding capacity. 175-200 microinch/minute at 50 - 55 degree C etch rate. 50 - 55 degree C operating temperature. ROHS Compliant.3. PCB Etching Kit System (ET20)
Feature
Molded plastic tank construction, high impact plasticPlug in heater to heat ferric chloride or etching chemical
120 v agitating air pump
Wire circuit board holders that hold board during etching & ease board handling
Graduated markings on molded tank to assist with pouring the etching solution
Description
This PCB Etching Kit System is easy to use and easy to assembly. PCB Etching can occur in 4 minutes. The printed circuit board etching tank features graduated markings to assist in setting appropriate etchant depth. Normal usage requires a minimum of 2000cc (2 liter) to a maximum of 2300cc's (2.3 litre) of etching solution Also included are some handy wire clips used to hang your PCB(s) in the tank. This feature makes it easy to lift the board out for easy quick check of the boards progress.Or, since the tank is translucent, board progress can be viewed by shining a light into the tank during the etching process.4. Dremel 220-01 Rotary Tool Workstation Drill Press Work Station with Wrench
Feature
Articulating Drill Press- Drills Perpendicular and Angled Holes in 15-degree Increments, up to 90 Degrees HorizontalTool Holder- Holds Tool at 90 Degrees Horizontal for Tasks Such as Polishing Metal Objects, Sanding Different Shapes and Grinding Metal Pieces
Flex Shaft Tool Stand- Allows Telescopic Adjustment to Any Height Between 16 and 29 Inches, Crow's Nest Provides On-board Storage for Drill Bits, Wrenches, and Other Dremel Accessories
Cord Management Clips - for Safe Storage of Power Cords, Inch/Metric Marking on Base - For Accurate Drilling of Workpiece, Depth Markings with Depth Stop - for Consistent Depth, Sturdy Metal Base with 4 Clamping Points - to Securely Hold the Station.
Compatible with Dremel Rotary Tool models 100, 200, 275, 285, 300, 395, 398, 400, 800, 3000, 4000, 4200, 8100, 8200, 8220.
Description
It's a drill press, tool holder and flex shaft holder all in one. Drill accurate perpendicular and angled holes. Holds your tool in place for applications like sanding and buffing, and the telescoping flex shaft holder extends to any height between 16 and 29 inches.5. MG Chemicals Liquid Tin, 125 ml Bottle
Feature
Quickly tinplates copper circuits on PC boards in 5 minutes or less at room temperatureProvides excellent solderability
Protects against oxidation
No mixing or dilution required
For commercial/industrial use only
Description
This MG Chemicals 421 Liquid Tin is a clear immersion tin for coating a copper substrate or solder deposit with a dense tin coating. It tinplates copper circuits on PC boards in 5 minutes or less at room temperature for immediate soldering capability. It leaves a dense coating, and it contains no co-deposited organics for strong resistance to oxidation. Liquid Tim can be readily soldered, has a long shelf life, and does not require mixing or diluting. Residues can be rinsed away with warm water for easy cleanup. Liquid Tin will cover 3600 square inches of board per half liter of solution, and it is Restriction of Hazardous Substances (RoHS) compliant. This solution is strongly acidic; protective gloves, clothing, and eye protection must be worn.
MG Chemicals manufactures chemical products for the electronics industry. The company, founded in 1955 and headquartered in Surrey, BC, Canada, meets International Organization for Standardization (ISO) standard 9001.
6. Radio Shack Circuit Board Etching Kit - Level 3 Advanced - 2770159
Feature
DIY CIRCUIT DESIGNCreate your own printed-circuit patterns with RadioShack's Circuit Board Etching Kit. It includes one blank copper PCB and three stencil sheets with component patterns.
Capacity UOM: mAh --- Rechargeable: No --- Package: 0.20 x 5.00 x 3.09 --- Model: 2770159 --- Product Type: Hobby kits --- Included in the box: Bank PCB, Patterned stencils (3) --- Operating Temperature UOM: F
Description
DIY CIRCUIT DESIGN - Create your own printed-circuit patterns with RadioShack's Circuit Board Etching Kit. It includes one blank copper PCB and three stencil sheets with component patterns - Capacity UOM: mAh --- Rechargeable: No --- Package: 0.20 x 5.00 x 3.09 --- Model: 2770159 --- Product Type: Hobby kits --- Included in the box: Bank PCB, Patterned stencils (3) --- Operating Temperature UOM: F7. MG Chemicals 416-K 9 Piece Photofabrication Kit
Feature
9 piece photofabrication kitProduce printed circuit boards using the positive photofabrication process
Tank measures 11" length by 7" width by 5" height
Description
This MG Chemicals 416-K photofabrication kit is a 9-piece set of items needed for producing a printed circuit board using positive photofabrication. It includes three presensitized, single-sided copper clad boards (3 x 5, 4 x 6, and 6 x 6", L x W) for transferring printed images during the exposure process. A bottle of Positive Developer and a plastic tray are provided for developing the image, and a bottle of ferric chloride and two foam brushes are provided for removing copper from the board during the etching process. Protective gloves and instruction sheet are also included. The materials in this photofabrication kit are compliant with either UL #E214381 for materials used in the fabrication of printed wiring boards, Restriction of Hazardous Substances (RoHS), or California Air Resources Board (CARB). Contains sodium hydroxide; protective gloves, clothing, and eye protection must be worn.
MG Chemicals manufactures chemical products for the electronics industry. The company, founded in 1955 and headquartered in Surrey, BC, Canada, meets International Organization for Standardization (ISO) standard 9001.
What's in the Box?
- 3 x 5" PCB
- 4 x 6" PCB
- 6 x 6" PCB
- 1 Bottle (475 ml) Positive Developer
- 1 Bottle (475 ml) ferric chloride
- 2 Foam brushes
- Plastic development tray
- Rubber gloves
- Instruction sheet
8. Printers TONER TRANSFER PAPER 10 SHEETS
Feature
Manufacturer: Pulsar Product Category: Printers RoHS: No Product: Dry Transfer GraphicsDescription
Printers TONER TRANSFER PAPER 10 SHEETS9. Uxcell a15091800ux0023 DIY Double Sided Copper Clad Laminate PCB Circuit Board 100x70 mm 12 Piece
Feature
Product name: copper Clad laminate circuit board; size(approx.): 100 x 70 x 1. 5mm / 4"x 2. 8"X 0. 6"(L*w*t)Layers: double sided; material: FR4 glass fiber
Surface finishing: copper Clad
Weight: 271G
Package content: 12 copper clad laminate pcb circuit board
Description
100mm x 70mm blank glass fiber FR4 double sided copper clad plate laminate universal PCB circuit board sheet for DIY.10. 10 PCB Circuit Board Thermal Transfer Paper A4 size Transfer Paper DIY Circuit Board Special Paper
Feature
Size: A4 / Color: Yellow / Quantity: 10(Please do not because of lack of experience, blame the thickness of the paper.Very sad)1 with a laser printer to print circuit board wiring diagram of the heat transfer paper surface(Note: can only be printed with a laser printer can not use inkjet printer!)
2 with a laminator adjusted to between 150-180 degrees Celsius, the heat transfer paper printed with a circuit diagram deposited in the copper-clad side for transfer; the system can also be used in place of iron plate machine, hand transfer
3 After printing remove the transfer paper, CCL will be etched into the ferric chloride solution
4 Finally, cleaning with gasoline toner board, sanding paper or water in the water to flush out carbon(For more success stories please check customer reviews)
Description
Product: TONER TRANSFER PAPERSpecifications: 10 sheets
Color: Yellow
Packing: File bag. Ensure paper integrity
Note: This DIY tool is a very easy to use a product. Please do not because of lack of experience, production failure, to blame the performance of paper.
Random to the poor assessment of the customer, please go to other businesses to buy
Printed circuit board production, electronic enthusiasts often compare headache one thing, many electronics enthusiasts in order to produce a printed circuit board, often described using paint board, Daoke, stickers, paste and other amateur production methods, speed slow. Thermal transfer method produced circuit boards, is to draw a good board graphics, laser printer to print in thermal transfer paper, transfer paper and then covered in Bonded Copper, after heating, the melted toner completely adsorbed in deposited on copper, etc. after cooling tear transfer paper, you can see the graphics board has been transferred onto a copper-clad, black anti-corrosion layer, that is what we want PCB diagram, and finally corrosion, and that we want to obtain the PCB board.
Thermal transfer board should pay attention to the following points:
1: Do not make the iron overheating or too cold, the best temperature is between 140 to 170, in this temperature range, the best transfer of plastic toner characteristics.
2: to wait for some lower temperature and then transfer paper peeled down, slowly exposing, and found no transfer of good parts, then cover, once again heating and heating for heat transfer.
3: some really problematic parts (such as broken) Please use oil-based carbon pen or nail polish, paint what remedial, but this is not a lot of this situation.
11. CNC 3 Axis Engraver Machine Milling Wood Carving DIY Mini Engraving Machine Kits
Feature
The mini CNC engraving machine laser engraving machine is suit for make non- metal processing such as plastic , wood , acrylic , pvc, pcb, wood or the like material , etc.And airframe adopt profiles + plastic small size, light weight , USB interface , open source GRBL control.DIY engraving machine, you need to assemble it by yourself.
Support laser engraving (not including the laser head)
We will send you the instruction and software together with the package. If you don't receive it, please contact us first, we will send it to you online, thanks.
1 year warranty - If you have any issues with this product, please feel free to contact us
Description
Introduction:The mini CNC engraving machine laser engraving machine is suit for make non- metal processing such as plastic , wood , acrylic , pvc, pcb, wood or the like material , etc.And airframe adopt profiles + plastic small size, light weight , USB interface , open source GRBL control.
Grbl is a no-compromise, high performance, low cost alternative to parallel-port-based motion control for CNC milling. It will run on a vanilla Arduino (Duemillanove/Uno) as long as it sports an Atmega 328.
The controller is written in highly optimized C utilizing every clever feature of the AVR-chips to achieve precise timing and asynchronous operation. It is able to maintain up to 30kHz of stable, jitter free control pulses.
It accepts standards-compliant g-code and has been tested with the output of several CAM tools with no problems. Arcs, circles and helical motion are fully supported, as well as, all other primary g-code commands. Macro functions, variables, and most canned cycles are not supported, but we think GUIs can do a much better job at translating them into straight g-code anyhow.
Grbl includes full acceleration management with look ahead. That means the controller will look up to 18 motions into the future and plan its velocities ahead to deliver smooth acceleration and jerk-free cornering.
Parameter:
Dimensions: 260 * 240 * 220mm
Stroke: 160 * 105 * 30mm
Screw: Professional T8 screw, lead 4mm, double copper nuts eliminating backlash
Stepper motor: 12V, 1.3A, 2.1, 0.25N.m
Spindle: 12-36V 7000r / min
Power: stepper motor (12V 3A), the spindle (24V 5A)
Countertops: 100X180mm
Package Included:
1 x set of Mini engraving machine (not including the laser head)
12. MG Chemicals Economy Etching Process Kit
Feature
Etch copper clad circuits professionallyAccommodates two 8-inches by 9-inches double sided copper clad boards
Ideal for students and hobbyists
An inexpensive etching process
Kit contains: 5 liter heavy duty polyethylene etching tank; air pump and tubing; sparging unit; bag of vinyl gloves; complete instructions
Description
This MG Chemicals 416-ES economy etching process kit is a 5-piece set of items for etching a copper clad board during positive photofabrication of a PCB. It includes a 5.6 liter polyethylene tank with lid for storing the etchant solution. An air pump with a single-line sparging unit creates bubbles to replenish the solution and agitate the board while etching. Vinyl gloves and instruction sheet are also included. This etching process kit will accommodate two 8 x 9" double-sided copper clad boards and requires ferric chloride or sodium persulphate (not included).
MG Chemicals manufactures chemical products for the electronics industry. The company, founded in 1955 and headquartered in Surrey, BC, Canada, meets International Organization for Standardization (ISO) standard 9001.
What's in the Box?
- Etching tank with lid
- Air pump
- Single-line sparging unit
- Pair of latex gloves
- Instruction sheet