When you looking for soldering wire holder, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable soldering wire holder is not an easy task. In this post, we show you how to find the right soldering wire holder along with our top-rated reviews. Please check out our suggestions to find the best soldering wire holder for you.
Reviews
1. Mini Magnetic Base Holder Third Hand Tool Helping Hands Soldering Iron Third Hand Tool Magnetic Soldering Clamp Wire Holder Assembly
Feature
Offers an extra pair of hands when solderingFlexible design allows different ways to attach and hold wire
Clips and base are magnetic and can be attached to any ferrous surface
Magnetic arms are detachable and can be moved and used without the base
Base is also hex shaped and can fit in a vise when needed
Description
> New Designed Magnetic Base With 2 Angled Fexible Shaft Alligator Clips.Easy Using For Metalwork Pieces. Big Magnetic Power (Max Power
Base Magnetic3.2cm
Package Content:
1 x Magnetic Base Holder Third Hand Tool
2. Repair Tools kit of 3 in 1 Repair Set with Helping Hands Magnifying Glass Solder Tip Cleaning Wire Holder and Desoldering Pump Univeral Repair Tools Set By Kaisi
Feature
Easy to use and desirable tools set: It is commonly use tools in repair working,this is a necessary tools set in your daily work-boxWidespread use: This group set enables you to do solder repairing work with high proficiency, which is suitable for fixing precise miniature circuit board, interface board, connection wire, fly-wire, network card drive
Soldering Magnifier Holder: 1 piece soldering holder with (2x) magnifying glass is conducive to tiny soldering work, 2 Alligator clips on 4-way swivels-hold items securely (leaving hands free)1 soldering stand
Solder Tip Cleaning Wire: 1 piece solder tip cleaning wire and holder that no water required ,would not cause premature wear of soldering iron tips, no contamination risk compared to conventional tip tinners
Desoldering Vacuum Pump: 1 piece Desoldering Pump tools gun that can remove solder splash. All Kaisi repair tools have 1 year warranty, 100% satisfaction and zero hassle returns guaranteed
Description
Features:1.Solder Tip Cleaning Wire and Holder:
Cleans better than conventional sponges
No water required
Will not reduce the tip temperature
Does not cause premature wear of soldering iron tips
No contamination risk compared to conventional tip tinners
2.Repair Stand:
The Helping Hand with Magnifying Glass-perfect for hobbyists, electricians,
jewelers, and everyday users while soldering and working with small parts and details.
The magnifier and clips will adjust to most angles, and the magnifier greatly reduces the need for extra visual aid.
A.Magnification: 2x
B.2 Alligator clips on 4-way swivels
C.soldering iron holder
3.Desoldering Pump:
Suck the Solder Away Easily
The solder sucker measures 7.48"X0.79", which will fit your hands perfectly no
matter if you are left-handed or right-handed. With metal body and high pressure
vacuum, this desoldering gun can help you suck the solder away effectively.
Package Include:
1*Solder Tip Cleaning Wire and Holder
1* Repair stand
1*Desoldering Pump
*Size:250*160*80
*Weigh: 400g
3. QuadHands Helping Hands Third Hand Soldering Tool and Vise - Four Flexible Metal Arms Can Be Positioned Exactly Where You Want - Professional Grade
Feature
FLEXIBLE METAL ARMS - Four all metal flexible gooseneck helping hands are easily positioned where you want them. Eliminates the frustration of traditional helping hands.MASSIVE STEEL BASE - Heavy 8" by 8" powder coated solid steel base - Won't tip over even with a heavy project.
WON'T TIP OVER - Supported by four large rubber feet that keep the QuadHands from sliding around on your bench.
STAINLESS STEEL CLIPS WITH INCLUDED COVERS - Stainless steel alligator clamps can be rotated 360 degrees then "locked" into place with knurled thumb nuts. Includes Removable Silicone Clamp Covers for Delicate Electronics.
BUILT IN THE USA - 100% Lifetime Warranty - Satisfaction Guaranteed
Description
The Ultimate Helping Hands ToolWe needed a sturdy, well built helping hands device for use in our product development studio. The ones on the market we tried were flimsy, hard to adjust, and came with tiny little bases that would tip over with anything but the smallest project mounted to them. Plus, we needed some extra "hands" to make it truly useful.
The other devices had only two hands to hold our project. That isn't enough when doing most electronic work. With solder in one hand and an iron in the other, having extra hands to hold wire or a component plus the project was important to us. So, in true "scratch our own itch" fashion, the QuadHands "four armed" helping hand device was created
Four Hands are Better Than Two
Four all metal flexible 'gooseneck' arms can be put exactly where you want and they'll stay. No more fumbling around with tiny set screws or other hard to adjust arms. Just move them where you want and let go.
Four stainless steel alligator clamps are mounted onto the threaded end of the goosenecks. Matched with a thumb nut, each clamp can be rotated 360 degrees in either direction then locked into place. Exactly where you want. This makes precision positioning much easier than other devices. And we even include a set of silicone clamp covers for use on delicate electronics
The solid steel base is a stable 8" by 8" with a heavy powder coat finish. Supported by four large rubber feet, it won't tip over or slide around your bench. Even when you are working on a heavy project. The whole system tips the scale at over 3.2 pounds. Much heavier and larger than others.
The QuadHands is a sturdy, well built device that simply does what it was designed to do. We think it is exactly the type of product you would have built for yourself given the time and inclination. Consider getting one for your bench today.
4. Soldering Iron Tip Cleaner and 3 Pack Brass Ball Wire-type with Holder By WYCTIN
Feature
Cleans better than conventional spongesDoesn't Require Water To Be Used With It
Do not reduce the tip temperature
Does not cause premature wear of soldering iron tips
No contamination risk compared to conventional tip tinners
Description
Description:To replace the traditional water seepage sponge for the United States THE RoHs standard
Without adding water,avoid iron head cooling,no the outbreak of solder ball,improve the efficiency of welding
Effectively prevent the oxidation of the soldering iron head,increase the iron head the service life
The ball design,tin slag can not be splashed on the work table, keep working environment clean
The iron head is inserted into the metal wire,multiple points of contact to achieve multi-point clean,effectively improve the work efficiency.Tip cleaner has the advantages of simple structure,obvious effect.
Warranty:
60Days Warranty. It's appreciate your patience to view and please feel free to contact with us.-Click to Add to Cart.Thank you
5. 2 Pack Welding Soldering Iron Tip Cleaner Stand Cleaning Solder Steel Wire And Holder Set Nozzle Sponge (Gold)
Feature
Best solder tip cleaner brush cleans the soldering tip.To clean the tip, simply plunge (stab) the iron into the holder
No water required and will not reduce the tip temperature.
Does not cause premature wear of soldering iron tips.
Dome design, tin slag will not splash on the table, keep the working environment clean
Description
* Best solder tip cleaner brush cleans the soldering tip.* To clean the tip, simply plunge (stab) the iron into the holder
* No water required and will not reduce the tip temperature.
* Does not cause premature wear of soldering iron tips.
* Dome design, tin slag will not splash on the table, keep the working environment clean.
Features:
* size: approx 2.5*2.1 inch
Package:
*2pack of Iron Tip Cleaner
Attention:
*Please wear gloves during replace the metal wire,put the cleaner up rightly when open it. Metal wire is springy so that don't take it out to sweep the tip,will possibly splash the melted residual solder,Please be careful.
6. Hakko 599B-02 Wire-type soldering iron tip cleaner
Feature
Cleans better than conventional spongesNo water required
Will not reduce the tip temperature
Does not cause premature wear of soldering iron tips
No contamination risk compared to conventional tip tinners
Description
The Hakko 599B-02 is a replacement solder tip cleaning wire sponge. These sponges are hard enough to remove debris and some corrosion from the solder tips while being soft enough not to damage the tip. They help to remove oxides and excess solder to preserve tip life and enable clean, precise soldering.7. Lisle 55000 Wire Holder Assembly
Feature
Offers an extra pair of hands when solderingFlexible design allows different ways to attach and hold wire
Clips and base are magnetic and can be attached to any ferrous surface
Magnetic arms are detachable and can be moved and used without the base
Base is also hex shaped and can fit in a vise when needed
Description
Offers an extra pair of hands when soldering. Alligator clamps firmly hold wire and small parts when soldering. Flexible design allows different ways to attach and hold wire. Clips and base are magnetic and can be attached to any ferrous surface. Magnetic arms are detachable and can be moved and used without the base. Base is also hex shaped and can fit in a vise when needed.8. Pro'sKit 900-015 Helping Hands Soldering Aid
Feature
Two alligator style clips to hold your components in placeWeighted base to keep unit upright
Several points of adjustments
Description
Helping Hands Soldering Aid This table top soldering aid features a weighted base and alligator style clips for holding your project in place. Multiple points of adjustment for ease of use.9. Aoyue 937+ Kit includes 60 Watt Soldering Station, Solder Wire, Flux, Fast Chip Removal Alloy, Tip Cleaner, Desoldering Pump and Solder Wick
Feature
45 watt iron with over 50 available tip sizes (T-I is included)PTC Element for fast heat up and accurate temperature control
Temperature range 200-480 C (392-897 F)
The Soldering Kit includes the Aoyue 937+ iron, TF5000 Tacky Flux, Solder Wick, 2 oz Spool of 63/37 Solder Wire
Also Include Fast Chip Removal Alloy (6.5 inch piece), Desoldering Pump and a TY-98 Soldering Iron Tip Cleaner
Description
Features: Includes Long Life Plug-in Ceramic heat Element with removalable tip design Auto Sleep and Wake Functions Digital Offset System Lockout Feature 2 Quick Jump buttons for favorite settings Switchable between F and C 24 volt output to prevent circuit damage ESD Safe CE and RohS Compliant design 45 watt Power consumption Temperature range 200-480 C (392-897 F) 110 V AC Package content: 937+ soldering station, B02830oldering iron, 2660 Soldering iron holder.10. SE MZ101 Helping Hand with Magnifying Glass
Feature
Holds item securely (leaving hands free) with 2 alligator clips on 4-way swivelsBuilt-in magnifying glass (4x) aids in minute detail work
Heavy-duty base for stability
For hobbyists, electricians, jewelers, and everyday users
Great for soldering, detailed work, and working with small parts
Description
SE is proud to present our Helping Hand with Magnifying Glass. Designed with the hobbyist, electrician, jeweler, and everyday user in mindthis helping hand is perfect for soldering, detailed work, and working with small parts. The magnifier and clips will adjust to most angles and the magnifier greatly reduces the need for extra visual aid. The heavy-duty base also provides stability when working.
Disclaimer: Magnifications are approximates and may vary slightly.
Important:
Avoid getting counterfeit items. Genuine SE products come with our SE logo on the packaging.
SE products are quality items for extremely reasonable prices. SE is committed to providing the customer with the best source for value possible on the market. You will enjoy the quality, function and usefulness this Helping Hand with Magnifying Glass has to offer.
SE is a registered trademark protected by US Trademark Law.
11. Delcast Solder Dispenser Wire Spool Holder Metal Stand Welding & Soldering Tools
Feature
Delcast Solder Dispenser Reel positions a solder spool in an upright position, allowing solder to neatly unwind as it is threaded through the loop of the adjustable dispenser arm.Description
Delcast Solder Dispenser Wire Spool Holder Metal Stand12. Repair Tool Kit 3 in 1 Solder Station Accessories Including Helping Hand with Magnifying Glass and Solder Tip Cleaner Wire Holder and 0.3mm Solder Wire By Kaisi
Feature
Worth to Own It: These repair tools are the most popular instruments in maintenance, the necessary soldering tools during your DIY repairWide Application: This repair kit can make your work more easier. It suitable for repairing precision electronic devices, such as circuit board, interface board, connecting line, SSD, network card, electronic components replace or repair
Soldering Magnifier Holder: 1 piece soldering holder with (2x) magnifying glass is conducive to tiny soldering work, 2 Alligator clips on 4-way swivels-hold items securely (leaving hands free)1 soldering stand
Solder Tip Cleaner and Holder: 1 piece solder Tip Cleaning Wire and Holder, no water required, does not cause premature wear of soldering iron tips, no contamination risk compared to conventional tip tinners
0.3 mm Solder Wire: 1 piece solder Wire only 0.3mm 60/40 0.3Mm 50G Tin Lead Rosin Core Solder Soldering Wire. All Kaisi repair tools have 1 year warranty, 100% satisfaction and zero hassle returns guaranteed
Description
Features:
1. Solder Tip Cleaning Wire and Holder:
A. Cleans better than conventional sponges
B. No water required
C. Will not reduce the tip temperature
D. Does not cause premature wear of soldering iron tips
E. No contamination risk compared to conventional tip tinners
2.Repair stand:
The Helping Hand with Magnifying Glass-perfect for hobbyists, electricians, jewelers, and everyday users
while soldering and working with small parts and details. The magnifier and clips will adjust
to most angles, and the magnifier greatly reduces the need for extra visual aid.
A. Magnification: 2x
B. 2 Alligator clips on 4-way swivels
C. Soldering iron holder
3. Solder Wire: 60/40 0.3Mm 50G Tin Lead Rosin Core Solder Soldering Wire
A. 60/40 0.3mm 50g tin lead rosin core solder soldering wire
B. Ship from United States of America
C. This item is sent to the United States , Canada and etc.
Package Include:
1*Solder Tip Cleaning Wire and Holder
1* Solder Wire
1*Repair stand
Size: 6.3*9.64*2.75 inch
weight: 30.9 ounce