When you looking for registers vents 10×8, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable registers vents 10×8 is not an easy task. In this post, we show you how to find the right registers vents 10×8 along with our top-rated reviews. Please check out our suggestions to find the best registers vents 10×8 for you.
Reviews
1. HVAC Premium 3-Way Curved Blade Supply Air Grille - Maximum Air Flow - HVAC Vent Cover, 10 x 8-Inch
Feature
10"w X 8"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 11.75" Width X 9.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLEMulti-Shutter Damper With Handle Operator - Screws Included
Quality Packaging - Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System
Description
10"w X 8"h 3-Way FIXED CURVED BLADE AIR SUPPLY DIFFUSER - Vent Duct Cover - Grille Register - Sidewall or Cieling - High Airflow - White10"w X 8"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 11.75" Width X 9.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Rigid Gauge Steel. Rigid gauge built for durability and long life in mind, but still light and handy.
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Quality Packaging - Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the "hole" in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +1.75".
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20" wide by 14" tall, order a 20x14. If your hole is 14" wide by 20" tall, order a 14x20.
2. Hart & Cooley 682 10x8 W HVAC Register, 10" W x 08" H, Two-Way Steel for Sidewall/Ceiling - White (043830)
Feature
All-steel construction (682) / Bright White finishUsed for ceiling or sidewall installations / Interlocking valve louvers for positive shut-off
Ideal for shallow duct installations
Two-way deflection / Multi-shutter valve
1/2" spaced fins set at 40 degrees / 1 5/8" depth when fully opened
Description
Hart & Cooley3. Grill Return Air 8x10in Brn
Feature
UPC: 063467117339Weight: 2.650 lbs
Description
8X10 BRN RETURN AIR FLR GRILL4. IMPERIAL GROUP USA 400B8X10 8x10 Grav FLR Register
Feature
The product is manufactured in chinaThe product is highly durable and easy to use
Easy installation and easy handling
Description
8" x 10", brown gravity floor register, heavy WEIGHT painted steel bars, adjustable damper. The product is manufactured in china. Easy installation and easy handling.5. 8" X 14" Heavy Duty Rigid Floor Grille - Fixed Blades Air Grill - Brown
Feature
8"w X 14"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 10" Width X 15.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLERigid Extra Heavy Duty to withstand constant walk on situations - Powder-Coat Finish - Smooth, Shiny, Beautiful. Looks Like It Was Just Waxed
Quality Packaging - Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Smooth Surface Edges - Run Your Fingers Across The Surface To Feel The Smoothness
Easy Unrestricted Air Flow For Your HVAC System
Description
8" X 14" Heavy Duty Rigid Floor Grille - Fixed Blades Air Grill - Brown8"w X 14"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 10" Width X 15.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house.
But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that you can point out to your family members and house guests.
Some of our best features aren't readily apparent, but you'll appreciate the benefits over a long period of time.
High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Heavy Gauge Rigid Steel. Heavier gauge than needed, built for durability and long life in mind, You can Dance on this one, no problem, will take all the weight.
Quality Packaging - Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the "hole" in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +2" at wisth and + 1.75" at width.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20" wide by 14" tall, order a 20x14. If your hole is 14" wide by 20" tall, order a 14x20.
6. Floor Register, 8" x 10"
Feature
AMERI-FLOW FLOOR GRAVITY REGISTERAdjusts with screw driver
One piece face
Brown
Shrinkwrapped, 8" x 10" Opening, 9-7/8"x11-7/8" Overall
Description
AMERI-FLOW FLOOR GRAVITY REGISTER *Adjusts with screw driver *One piece face *Brown *Shrinkwrapped *8" x 10" Opening *9-7/8"x11-7/8" Overall7. 10" x 8" 3-WAY SUPPLY GRILLE - DUCT COVER & DIFUSER - Flat Stamped Face - White
Feature
Sidewall and/or Ceiling GrilleEasy Unrestricted Air Flow For Youre HVAC System
Carefully shrink wrapped with cardboard backing to prevent damage in shipment
Screws Included
No Sharp Surface Edges
Description
10w" x 8h" opening (vent hole) dimension - actual size is approx 2" wider.You may think of grilles and registers as a generic component of the ventilation system in your house.
But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that you can point out to your family members and house guests.
Some of our best features aren?t readily apparent, but you?ll appreciate the benefits over a long period of time.
This grille has a high standard of design, production and finish on all products.
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you?ll find a smooth finished surface.
Heavy Gauge Steel. Heavier gauge than needed, built for durability and long life in mind.
8. Decor Grates SPH408-RB Scroll Plated Register, 4-Inch by 8-Inch, Rubbed Bronze
Feature
Scroll steel plated rubbed bronze floor registerEasy to install
Crafted for long trouble free operation
Classic design
Rust proof damper body with easy air flow control
Description
Decor Grates floor registers are built with the finest materials. Each and every register goes through a quality assurance process to ensure your satisfaction. Our classic designs will enhance any rooms decor and give you years of trouble free operation. Our family owned company takes great pride in making sure you are totally satisfied with your purchase.9. C-Box HVAC Plenum Ceiling Box 10 x 10 x 8 Round-Connects to Vent Register Diffuser by SMK
Feature
Our C-Boxes are built with a 1/2" flange all the way around the square portion which can be used for attachment or folded over.We also have a full line of ceiling registers and hvac fittings.
The best way to regulate air flow is to install a manual volume damper in the duct run.
Call us with your hole size and duct size so we can help (866) 309-9899
Connects a 8" Round Duct to a 10 x 10 Diffuser or Register Vent.
Description
10 Inches X 10 Inches is the actual size of the square portion. Your diffuser or register will be slightly larger than this.10. 10" x 8" ADJUSTABLE DIFFUSER - Vent Duct Cover - Grille Register - Sidewall or Cieling - High Airflow
Feature
Sidewall and/or Ceiling GrilleEasy Unrestricted Air Flow For Youre HVAC System
Carefully shrink wrapped with cardboard backing to prevent damage in shipment
Screws Included
No Sharp Surface Edges
Description
10w" x 8h" opening (vent hole) dimension - actual size is approx 2" wider.You may think of grilles and registers as a generic component of the ventilation system in your house.
But they are also the most visible representation of you air system.
Metal-Fab grilles and registers give you an extra measure of quality that you can point out to your family members and house guests.
Some of our best features aren?t readily apparent, but you?ll appreciate the benefits over a long period of time.
Metal-Fab has a high standard of design, production and finish on all products.
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you?ll find a smooth finished surface.
Heavy Gauge Steel. Heavier gauge than needed, built for durability and long life in mind.
11. 10" x 8" - 2-Way SUPPLY GRILLE - DUCT COVER & DIFUSER - Flat Stamped Face
Feature
10"w X 8"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 11.75" Width X 9.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLEMulti-Shutter Damper With Handle Operator - Screws Included
Quality Packaging - Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System
Description
10"w X 8"h 2-Way-Horizontal FIXED CURVED BLADE AIR SUPPLY DIFFUSER - Vent Duct Cover - Grille Register - Sidewall or Cieling - High Airflow - White10"w X 8"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 11.75" Width X 9.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Rigid Gauge Steel. Rigid gauge built for durability and long life in mind, but still light and handy.
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Quality Packaging - Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the "hole" in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +1.75".
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20" wide by 14" tall, order a 20x14. If your hole is 14" wide by 20" tall, order a 14x20.
12. Truaire 170 10X08 Return Air Grille 10-Inch x 8-Inch Sidewall or Ceiling Return Air Grille, White
Feature
Heavy gage all steel constructionExceptional free area
1/2-inch spaced fins
High quality powder coated
For heating or cooling applications
Description
10"w X 8"h Steel Return Air Grilles - Sidewall and Cieling - HVAC DUCT COVER - White10"w X 8"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 11.75" Width X "w X 9.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
Some of the best features aren't readily apparent, but you will appreciate the benefits over the period of time.
This grille has a high standard of design, production and finish on all products.
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Quality Packaging - Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the "hole" in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +1.75".
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20" wide by 14" tall, order a 20x14. If your hole is 14" wide by 20" tall, order a 14x20.