When you looking for servo 17kg, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable servo 17kg is not an easy task. In this post, we show you how to find the right servo 17kg along with our top-rated reviews. Please check out our suggestions to find the best servo 17kg for you.
Reviews
1. LewanSoul LD-3015MG Standard Full Metal Gear Digital Servo with 17kg High Torque for RC Robot Car(Control Angle 270)
Feature
17kg large torque. 15 kgcm (208 ozin) 6.6V; 17 kgcm (236 ozin) 7.4VFull metal gear. it's better for accuracy, service life has been greatly increased
270 degree rotation. Controllable angle range from 0 to 270 degrees, Excellent linearity, precision control. Can be rotated within 360 degrees when power off
Using high-precision potentiometer with new design. Accuracy and linearity have been greatly improved! Accurate movement can satisfy the needs of making robots
Dimension: 40*20*40.5mm(1.57*0.78*1.59inch)
Description
Specifications:Weight: 60g(2.1OZ)
Dimension: 40*20*40.5mm(1.57*0.78*1.59inch)
Speed: 0.16sec/60(7.4V)
Accuracy: 0.3
Torque: 15 kgcm (208 ozin) 6.6V;17 kgcm (236 ozin) 7.4V
Working Voltage: 6-7.4V
Min Working Current: 1A
No-Load Current: 100mA
# Spline: 25T(6mm diameter)
The servo wire: 30cm(11.8inch) in length
Control Specifications:
Control Method: PWM
Pulse Width: 500~2500
Duty Ratio: 0.5ms~2.5ms
Pulse Period: 20ms
Please make sure that the duty cycle of the controller you are using conform to our specifications, otherwise the servo can't turn up to claimed degree
Wire Layout:
Red Wire: +
Black Wire: GND
White Wire: PWM/Signal
Package Contents:
1 x Digital servo
1 x 30cm servo wire
1 x Servo horn kit(as shown in the figure)
If you have any questions, please feel free to contact us at [email protected]
Note:
Note: Please be sure to avoid locked-rotor when using servo, locked-rotor means that artificially or machine obstructs the servo to rotate normally, the locked-rotor will lead to internal current increased to more than 7 times and the temperature increases, servo will burn out.
Notice for use:
1. It's recommended that use lithium polymer battery with high rate discharge(min 5C), please don't use dry battery.
2. Please use a short and thick power cord, don't use Dupont cord
2. LewanSoul LDX-218 Full Metal Gear Standard Digital Servo 17kg High Torque Dual Ball Bearing Robot(Control Angle 180)
Feature
17kg large torque. 15 kgcm (208 ozin) @6.6V; 17 kgcm (236 ozin) @7.4VFull metal gear. it's better for accuracy, service life has been greatly increased
Dual ball bearing: one is the driving ball bearing, one is the assistant ball bearing(support role)
Using high-precision potentiometer with new design. Accuracy and linearity have been greatly improved! Accurate movement can satisfy the needs of making robots.
Convenient plug-in wire. Eliminate the situation of desoldering. In the production of making robots, it is very convenient for you to replace the servo and wiring become much more easier.
Description
Specifications:Weight: 60g(2.1OZ)
Dimension: 40*20*40.5mm(1.57*0.78*1.59inch)
Speed: 0.16sec/60(7.4V)
Accuracy: 0.3
Torque: 15 kgcm (208 ozin) @6.6V;17 kgcm (236 ozin) @7.4V
Working Voltage: 6-7.4V
MIn Working Current: 1A
No-Load Current: 100mA
# Spline: 25T(6mm diameter)
The default wire: 35cm(13.78inch) in length
180 degree rotation. Controllable angle range from 0 to 180 degrees, Excellent linearity, precision control. Can be rotated within 360 degrees when power off
Control Specifications:
Control Method: PWM
Pulse Width: 500~2500
Duty Ratio: 0.5ms~2.5ms
Pulse Period: 20ms
Please make sure that the duty cycle of the controller you are using conform to our specifications, otherwise the servo can't turn up to claimed degree
Package Contents:
1 x Digital servo
1 x 30cm servo wire
1 x Primary servo horn(4mm/0.157in thick)
1 x Assistant servo horn(2mm/0.078in thick)
15 x M2*5 Self-tapping screws
2 x Bracket
If you have any questions, please feel free to contact us at [email protected], we'll offer help to you ASAP
Note:
Note: Please be sure to avoid locked-rotor when using servo, locked-rotor means that artificially or machine obstructs the servo to rotate normally, the locked-rotor will lead to internal current increased to more than 7 times and the temperature increases, servo will burn out.
Notice for use:
1. It's recommended that use lithium polymer battery with high rate discharge(min 5C), please don't use dry battery.
2. Please use a short and thick power cord, don't use Dupont cord
3. MakerFocus Digital Servo with 15 KG / 17KG High Torque, 270 Control Angle, with Metal Gear Standard, Two-axis Serv High Precision with Two U Brackets for Robot RC Car DIY
Feature
High-precision digital servo-adapting high-precision potentiometer, the precision and linearity are greatly improved.Convenient wiring-adapting the way of plugging and unplugging the wire, put an end to the situation of desoldering occurs.
Control Angle 270 degree-the control angle range is 270 degree, good linearity, high-precision control. If the power is off, it can rotate 360 degrees.
17KG high torque. Biaxial support: one is the active shaft, another is the imaginary axis (support role)
Full metal gear. It can improve the servo's service life.
Description
Why choosing this:Comparing to model servo, only sending the singal once time, our digital servo can lock the angle not to change. And our digital has high control accuracy, good linearity and fast speed.
Features:
High-precision digital servo-adapting high-precision potentiometer, the precision and linearity are greatly improved.
Convenient wiring-adapting the way of plugging and unplugging the wire, put an end to the situation of desoldering occurs.
Control Angle 270 degree-the controble angele range is 270 degree,
good linearity, high-precision control. If the power is off, it can rotate 360 degrees.
17KG hght torque-Biaxial support: one is the active shaft, anothe is the imaginary axis (support role)
Full metal gear-It can improve the servo's service life.
Specifications:
Weight: 60g
Dimension: 40*20*40.5mm
Speed: 0.16sec/60(7.4V)
Torque: 15 kgcm 6.6V, 17 kgcm 7.4V
Working Voltage: 6-8.4 V
No-Load Current: 100mA
The servo wire: 30cm(11.8inch) in length
Control Specifications:
Control Method: PWM
Pulse Width: 500~2500
Duty Ratio: 0.5ms~2.5ms
Pulse Period: 20ms
Accuracy: 3us
Note:
Please be sure to avoid locked-rotor when using servo, locked-rotor means that artificially or machine obstructs the servo to rotate normally, the locked-rotor will lead to internal current increased to more than 7 times and the temperature increases, servo will burn out.
Package Including
1 * digital servo
1 * servo line
1 * spindle drive plate(tickness:4 mm )
1 * secondary shaft rudder disc(tickness: 2 mm)
1 * 54*33*23mm U Bracket
1 * 43*27*23mm U Bracket
4. LewanSoul LX-16A Full Metal Gear Serial Bus Servo Robotic Servo 17kg High Torque, Real-Time Feedback Position Voltage Temperature, Dual Ball Bearing RC Robot Arm(Control Angle 240)
Feature
17kg large torque. 15 kg/cm (208 oz/in) 6.6V; 17 kg/cm (236 oz/in) 7.4V. We provide communication protocol and detailed video tutorialsReal-time feedback of position, temperature, voltage. The top of the servo has a warning light, and the indicator will blink when overcurrent, over temperature or locked-rotor occurs
Full metal gear. it's better for accuracy, service life has been greatly increased. Dual ball bearing: one is the driving ball bearing, one is the assistant ball bearing(support role)
Using high-precision potentiometer with new design. Accuracy and linearity have been greatly improved! Accurate movement can satisfy the needs of making robots
The control board use a I/O port to connect the serial servo, servos are connected in series through a dual interface, which reduce the use of serial ports. Simple wiring make product more simple, Exquisite, attractive
Description
Important:LX-16A Bus Servo use our private serial protocol, so you must use our TTL/USB debug board(compatible for Arduino) to control bus servo, otherwise you cannot do anything with the bus servo.
The debug board required to purchase separately from our store. (no matter how many servos you control, you only need a debug board)
Features:
Each servo can set the ID number for the identification of the servo, the ID defaults to 1.
240 degree rotation. Controllable angle range from 0 to 240 degrees, Excellent linearity, precision control. Can be rotated within 360 degrees when power off.
Dual ball bearing: one is the driving shaft, one is the assistant shaft(support role)
Specifications:
Weight: 52g(1.8oz)
Dimension: 1.78*0.97*1.38inch
Speed: 0.18sec/60@6V; 0.16sec/[email protected]
Servo accuracy: 0.24
Torque: 15 kg/cm (208 oz/in) @6.6V; 17 kg/cm (236 oz/in) @7.4V
Minimum working current: 1A
Servo ID: 0~253
Storage users' parameter setting after power off: support
Control method: serial command
Communication baud rate: 115200
Package Contents:
1 x Bus servo
2 x Servo Horn
1 x Main Screw
1 x Deputy Screw
15 x M2*4 Self-Tapping Screw
1 x 20cm(7.87inch) Servo Wire
1 x Service Card
Note:
1, Please access the link in the service card to get all informations, contain user manual, testing software, pc software, communication protocol, video tutorials(Windows only)
2, Please ignore the website on the label of product.
3, Please refer to the torque parameter in our "Product Description"(it's accurate).
Please be sure to avoid locked-rotor when using servo, the locked-rotor will lead to internal current increased to more than 7 times and the temperature increases, servo will burn out.
5. Junsi Power HD 1501MG Copper Gear Servo 17KG 25T High-Torque Parts for RC Cars Buggy
Feature
HD 1501MGHigh-Torque Parts
RC Cars Buggy
Description
Description: Condition: Brand new & high quality. Brand: Power HD Feature: Torque(4.8V): 15.5 kg-cm (215.3 oz/in) Torque(6.0V): 17.0 kg-cm (236.1 oz/in) Speed: 0.16 sec (4.8V) 0.14 sec (6.0V) Operating Voltage4.8 ~ 6.0 DC Volts Weight: 63.0 g (2.22 oz) Bearing TypeBall Bearing x 2 Motor TypeDC Motor Gear TypeCopper Operating Temperature-20~60 Working frequence1520s / 50hz Size40.7 x 20.5 x 39.5 mm ( 1.60 x 0.81 x 1.56 in) for RC Cars Buggy Truck JR Futaba etc. Package includes: 1x servo w/part (send without retail package)6. Digital Robot Motor Servo,Quimat High Performance Full Metal 17KG Torque 180 Degree Rotating Digital Brushless Motor with Big U Mounting Case and Hand Bracket
Feature
Double bearings and full metal gear, 17kg Digital High Torque Brushless motor servoConvenient wiring mode, adopt plugging and drawing wire mode of connection, avoid unsoldering.
Widely used, suitable for Robots Helicopter Airplane Car Truck Boat controls
Stall Torque :Stall Torque:15kg/cm6.6v) ;17kg/cm(7.4v)
Operating speed & Dimension: 0.16 sec/60 (7.4v); 402040.5mm
Description
Features: Net Weight: 60g (Servo only) Dimension: 402040.5mm Stall torque:15kg/cm6.6v); 17kg/cm(7.4v) Operating speed: 0.16 sec/60(7.4v) Control Angle: 180 degree Operating voltage: 6-7.4v Gear Type: Metal gear servo wire length: 30cm Dead band width: 3us Compatible with:RC Robot Package Contents Dual Output Shaft Servo Motor * 1 Big U Servo Bracket * 2 Hand Bracket Metal Horn * 2 Screws7. Junsi 330HZ 17KG 6.8-8V Coreless Motor Digital Servo for RC Helicopter Car Boat Truck
Feature
330HZ 17KG 6.8-8V CorelessMotor Digital Servo
RC Helicopter Car Boat Truck
Description
Description: Condition: Brand new & high quality. Specification: Working frequence:1520s/330hz Motor:coreless motor Operating Voltage:DC6-8.4V Operating Temperature Range:-10 to +60 Operating Speed(6.0v):0.1sec/60 Operating Speed(8.4v):0.08sec/60 Stall Torque(6.0v):13.56kg.cm(188.31oz/in) Stall Torque(8.4v):17.18kg.cm(238.58oz/in) Dimensions:40.5*20.5*36mm/1.59*0.80.1.43in Weight:59.3(2..09oz) Connector Wire length: JR 265mm(10.43in) Bearing:2BB Package includes: 1x servo w/accessories(send with retail package)8. Detectoy Power HD High-Torque 60G Standard Servo 1501MG All Metal Gear 17KG 0.14 SEC Worldwide Sale
Feature
The 1501MG is a metal-geared analog servo from Power HD that delivers extra-high torque normally associated with much more expensive or larger servos. This servo is a replacement for-and upgrade over-the original HD-2550A servo. Servo horns and associated hardware are included.Key specs at 6 V: 0.14 sec/60, 240 oz-in (17 kg-cm), 60 g.
Analog Servo-HD-1501MG
Description
Feature:The 1501MG is a metal-geared analog servo from Power HD that delivers extra-high torque normally associated with much more expensive or larger servos. This servo is a replacement for-and upgrade over-the original HD-2550A servo. Servo horns and associated hardware are included.
Specifications:
Key specs at 6 V: 0.14 sec/60, 240 oz-in (17 kg-cm), 60 g.
Analog Servo-HD-1501MG
Function of Performance
Dimension:40.7x20.5x39.5mm
Supply voltage:4.5~6.0V
tall Torque:17kg.cm
Operating Speed:0.14sec/60(no load running)
Storage Temperature -20~55
Dead band width:4us
Package including:
1 x Servo(other accessories are not included)
9. HITSAN JX BLS-HV7117MG 17KG HV High Precision Steel Gear Digital Brushless Servo One Piece
Feature
Toys hobbies and robotRc toys & hobbies>rc helicopter parts
No returns or no refunds after 10days except damage and defective case
No cancellation after dispatch
Description
Specification: dead band: 1 s working frequence: 1520 s / 330hzmotor: brushless motoroperating speed (6v): 0.11sec/60 operating speed (7.4v): 0.09sec/60 stall torque (6v): 15.5kg. Cm stall torque (7.4v): 17.8kg. Cm dimensions: 40.5x20.5x36mm weight: 71 g connector wire length: jr 265 mm bearing: 2bb feature: - high voltage- high performance programmable digital brushless standard servo- high-precision taiwan-made steel gears with hard anodizing- full cnc aluminium shell structure- dual ball bearings- waterproof package include: 1x jx bls-hv7117mg 17kg servo10. kuman 17KG High Torque Digital Robot Servo Motor with 270 Degree Rotating, U Bracket and Side cover servo Mount Case for RC Robot Helicopter Airplane Boat KY72-1
Feature
Kuman 17kg Digital High Torque Robot Servo full Metal Gear and double-axis Servo Motor, with U Bracket and Side cover servo Mount Case.Stall Torque:15kg/cm6.6v) ;17kg/cm(7.4v)
High-Precision Digital Servo: Advanced linearity and accuracy with precision potentiometers.
Convenient wiring Connection: Pull and Plug connections avoids sealing-off. Easy to replace servo and wiring.
High Rotation: well-controlled, up to 270 degree rotation. 360 degree rotation when power-off. EcoFriendly:noanychemicalsLikemercuryandlead.
Description
Description:High quality robot servo with advanced interior design and precision potentiometers.
Pull and Plug connections and servo wire works better for robot.
Dual-ball Servo which means one is Driving shaft and another is virtual axis (supporting function).
High torque and 270 degree rotation, barely absent and dead zone.
Specification:
Weight: 60g
Size: 40*20*40.5 mm
Speed:0.16 sec/607.4V
Locked-Rotor Torsion15Kg.cm 6.6V; 17Kg.cm 7.4V
Voltage: 6-7.4V
Unload Current: 100mA
Line Length: 30cm
Package Contain
1*Double-axis digital Servo Motor (402040.5mm)
1*Servo wire (30cm)
1*U bracket (56*44*25mm)
1*Side cover servo Mount Case (42.5*13*42.5mm)