We spent many hours on research to finding rj45 cable tester, reading product features, product specifications for this guide. For those of you who wish to the best rj45 cable tester, you should not miss this article. rj45 cable tester coming in a variety of types but also different price range. The following is the top 10 rj45 cable tester by our suggestions:
Reviews
1. Cable tester, ELEGIANT XQ-350 Wire Tracker Tester RJ45 RJ11 Network Tester Telephone Phone Wire Finder Ethernet LAN Line Finder Cat5 Cat6 with 2 Network Wire Stripper, Headphone, Toolkit
Feature
Please Note. Before you use the product to test or track cables, please make sure that the wires are in low-electricity or power-off condition(maximum currents for emitter and receiver are 10mA and 30mA respectively, and the maximum voltage is 24 V ), otherwise the item will get damaged. Besides, you may need two 9V laminated cell, which are NOT included in the packaging of this item.Multifunctional & Easy to Operate. It can trace not only Ethernet LAN wires, but also electrical and speaker wires when connecting to the alligator clip. In this situation, the wires must be in power-off status, otherwise the units will be damaged. There are only 2 buttons on the emmiter,FUNCTION SLECETING & FUNCTION SWTICHING, and 1 INCHING button on the receiver. The indicating words such as "SCAN" and "TEST" are clear and easy to identify.
Convenient to Use. Wire Tracking: Connect the wire to the emitter through alligator clips. Select "SCAN". Emitter works properly if the indicator "STATUS" is on. Use the receiver to find target wires. No need of multi-testers. Network Cables Verifying: Plug one side of the cable into the emitter and the other side into the receiver. Select "TEST", the emitter works properly if the indicating light "VERIFY" is on. Determine circuit problems from numerous cables. No need of network tester.
Low-Voltage Reminding & Energy Saving. Select "SCAN", the "STATUS" indicator and the "VERIFY" indicator will flash at the same time when the cell voltage is below 6V. It will automatically switch off while not using, which can prolong the service life of the cell to more than 50 hours.
Additional Earphone & Equipped Lamp. In a noisy environment, you can put on the earphones to accurately find the target cable through comparing the strength of "beep beep" sound. Adjust the volume knob to make the volume proper and avoid being interfered. At night or in a dark environment, you can turn on the illuminating lamp, which can be helpful during operating.
Description
Features:1.Easy to operate and smooth appearance.
2.Flexible interface,wide application.
3.Portable and easy to carry.
4.Light touch switch,saving energy and power.
5.Indicator and sound reminding.
6.Quick or slow,volume adjustable.
7.Headset to fit the noisy environment.
8.Software control,stable and reliable.
Function:
1.Wire tracking(able to track wires with exchanger,router n or off).
2.Wire verification(with 18 indicators,short circuit,broken circuit,crossing,etc.can be tracked)
3.Line status test.
Specification:
1.Power specs:DC,9V laminated battery(not included)
2.Max. operating current:Emitter+-10mA; Receiver+-30mA
3.Signal transmission format:Multi-frequency pulse
4.Signal transmission format:Multi-frenquency pulse
5.Signal output level:8Vp-p
6.Signal tranjsmission distance:<3km
Applicable scope:
Phone network line engineering;computer network engineering;Other metal wire line engineering.
Package includes:
1 set emitter
1 set receiver
1 PC earphone
1 PC RJ11 adapter
1 PC RJ15 adapter
1 PC alligator clip adapter
1 PC Toolkit
1 PC User manual
2. UbiGear Cable Tester +Crimp Crimper +100 RJ45 CAT5 CAT5e Connector Plug Network Tool Kits (Crimper315)
Feature
1 x Network Crimper 315 -- works for RJ11 (6P4C), RJ12 (6P6C) and RJ45 (8P8C) connectors1 x Cable Tester for cables with RJ45/RJ11/RJ12 Connector
1 x Wire Stripper (Free)
100 x RJ45 RJ-45 CAT5 Modular Plug
UbiGear One-Year Limited Warranty
Description
Cable Tester: 1.Test RJ11/RJ12/RJ45 cables. 2.Test correspondingly double-twisted cables 1, 2, 3, 4, 5, 6, 7, 8 and Ground. 3.Can judge wrong connection, short circuit and open circuit. 4.Put cables into both main tester and remote tester. 5.The lights of the main tester will turn on sequentially from 1 to G. 6.Detachable remote tester, test remote cable up to 1000ft. in length. 7.Power supply: 2 pcs AAA batteries (not included). 8.Come with protective leather case.3. UbiGear Cable Tester +Crimp Crimper +50 RJ45 CAT5e Pass-though Connector Plug Network Tool Kits (568ToolKits)
Feature
1 x UbiGear Network Crimper 568R -- works for RJ11 (6P4C), RJ12 (6P6C) and RJ45 (8P8C) connectors1 x UbiGear 916D Cable Tester for cables with RJ45/RJ11/RJ12 Connecto (battery/charger not included)
50 x RJ45 RJ-45 CAT5e Pass-through Modular Plug
1 x Wire Stripper (Free)
UbiGear One-Year Limited Warranty
Description
916D Cable Tester: 1.Test RJ11/RJ12/RJ45 cables. 2.Test correspondingly double-twisted cables 1, 2, 3, 4, 5, 6, 7, 8 and Ground. 3.Can judge wrong connection, short circuit and open circuit. 4.Put cables into both main tester and remote tester. 5.The lights of the main tester will turn on sequentially from 1 to G. 6.Detachable remote tester, test remote cable up to 1000ft. in length. 7.Power supply: Any 5V micros USB charger (not included), or DC 9V battery (not included). 8.Come with protective leather case.4. Optimal Shop 4 In 1 Network Cable Tester RJ45/RJ11/USB/BNC LAN Cable Cat5 Cat6 Wire Tester
Feature
Test 4 types of cables: RJ-45, RJ-11, USB and BNC. Test installed wiring or patch cables. Tests shielded (STP) or unshielded (UTP) LAN cables.Test shields in USB cables. Can test from 2 remote points. Beeper provides audible annunciation of test results. Remote unit stores in Main unit.BNC terminator 25/50 Ohm indications. Straight or crossover indications. LEDs indicate connections and faults of wire and pins. RJ-11/RJ-45 are equipped with 50u gold plating.
300 feet test distance (RJ-45/RJ-11/BNC). Ergonomic portable handheld design. Powered by a 9V Alkaline battery. (Not included) Convenient battery access.
Low Battery Indicator. Simple one button test. Fast speed testing. High quality warranted.
Description
Buyers Please Note:Optimal Shop PRODUCT,Optimal Shop Is a USA registered trademark. Beware of counterfeit products using Optimal Shop copyrighted photos or descriptions without authorization, and beware of products imitating Optimal Shop branding. Please help fight counterfeiting.
Specifications:
Cable Tested:
UTP and STP LAN cables, terminated in RJ-45 male connectors (EIA/TIA 568);RJ-11 cables with male connectors, 2 to 6 conductors installed;USB cables with Type A flat plug on one end and type B square Plug on other end;BNC cables with male connectors.
Faults Indicated: No Connections, Shorts, Opens and Crossover
Low Battery Indicator: LED lights to indicate low battery
Power: 1 x 9 V 6F22 DC Alkaline Battery (Battery Not Included)
Color: Grey
Item dimensions: Appox. 162 x 85 x 25mm (6.38 x 3.35 x 0.98 inch)
Item weight: 164g (Battery excluded)
Package dimensions: 225 x 110 x 43 mm
Package weight: 215g
Package Includes:
1 x Optimal Shop 4-in-1 Network Cable Tester
1 x Far End Remote Jack (USB RJ45 RJ11) (Attached to the main unit)
1 x BNC Remote Jack
1 x Carrying bag
1 x Instruction Manual
5. Optimal Shop Multifunctional RJ45 RJ11 RJ12 CAT5 UTP Network LAN Cable Tester Networking Tool
Feature
Can test correspondingly double-twisted cables 1, 2, 3, 4, 5, 6, 7, 8andG, meanwhile,Can judge wrong connection, short circuit and open circuit.
Can tests RJ 11and RJ45
Test of double-twisted cables: Switch on the power. (S is slow automatic grade, Mis manual.) Put cables into both main tester and remote tester. The lights of the main tester will turn on sequently form 1 to G.
Description
Description:Main tester: 1-2-3-4-5-6-7-8-G
Remote tester: 1-2-3-4-5-6-7-8-G RJ45
1-2-3-4-5-6 RJ11
Following are abnormal connections:
If one cable, for example cable NO.3 is open circuited, the two NO.3 lights of the main tseter and remote tester will not turn on.
If several cables are not connected, several lights will not turn on respectively. If less than two cables are conntected, none of the lights is on.
If two ends of a cable is disordered, for example NO. 2and NO. 4, then displays on:
Main tester: 1-2-3-4-5-6-7-8-G
Remote tester: 1-4-3-2-5-6-7-8-G
If two cables are short circuited, neither of the corresponding lights is on of the remote tester while main tester remains unchanged. If three cables, including three, are short circuited, none of the corresponding liaghts is on.
If test patch panels or wall plate outlels, two cables which can match each other (RJ45) will be connected to the tester.
If test cables of the same axes, BNC turns on when the cable works.
9V reduplicated battery is used in this tester. Battery is advised to change if any weak light oppears.( Battery is not included.)
Colour: white
Main tester
Size: 105*67*28mm
Weight: 74g
Remote tester
Size: 105*38*28mm
Weight: 47
Package size: 185*113*34mm
Package weight: 175g
Package includes:
1 x Optimal Shop Network Cable Tester
1 x Optimal Shop black bag for tester
6. TRENDnet Network Cable Tester, Tests Ethernet/USB & BNC Cables, Accurately Test Pin Configurations up to 300M (984 ft), TC-NT2
Feature
Comprehensive cable tester for network professionalsAccurately test pin configurations for various voice and data cables for length up to 300 meters (984 Ft.)
Quickly identify faulty cables with the built-in audio tone indicator
Verifies cable continuity, opens, shorts, and miswires
Tests Pin Configuration of 10/100/1000Base-T, 10Base-2 (coax), RJ-11/RJ-12/RJ-45, EIA/TIA-356A/568A/568B, and Token Ring Cables
TRENDnet Network Cable Tester
Description
The TRENDnet's TC-NT2 is a convenient and comprehensive cable tester for network professionals. Its powerful and user-friendly features enable network installers to accurately check pin configurations of various voice and data communication cables. The TC-NT2 includes a master unit that transmits test signals to its corresponding remote terminator to verify cable reliability. It checks continuity and displays wiring configuration up to 300 meters of cable installation. With the unique feature of the audio tone generator, the TC-NT2 identifies and troubleshoots faulty cables to assure proper pin and wiring structure.7. Zoostliss Network Cable Tester RJ45 RJ11 RJ12 UTP LAN Cable Tester Networking Tool
Feature
Keep your network running smoothly by testing your cables to uncover problematic shorts, open wires, crossing pairs and other wiring mishapsUse for testing your homemade Ethernet patch cables to make sure they are in working order prior to connecting to your devices
Tests RJ45 cables, RJ11 telephone cables and network cables. Requires one 9-volt battery (not included)
Easy to read LED display indicates problems.Hand-held for portability.
If you do not like our products, we accept 30 days return and 60 days replacement, please feel free to contact us if you face any problems
Description
Features:Following are abnormal connections:
If one cable, for example cable NO.3 is open circuited, the two NO.3 lights of the main tester and remote tester will not turn on.
If several cables are not connected, several lights will not turn on respectively. If less than two cables are connected, none of the lights is on.
If two ends of a cable is disordered, for example NO. 2and NO. 4, then displays on:
Main tester: 1-2-3-4-5-6-7-8-G
Remote tester: 1-4-3-2-5-6-7-8-G
If two cables are short circuited, neither of the corresponding lights is on of the remote tester while main tester remains unchanged. If three cables, including three, are short circuited, none of the corresponding lights is on.
If test patch panels or wall plate outlles, two cables which can match each other (RJ45) will be connected to the tester.
If test cables of the same axes, BNC turns on when the cable works.
9V reduplicated battery is used in this tester. Battery is advised to change if any weak light appears.( Battery is not included.)
Color: white
Main tester
Size: 105*67*28mm
Weight: 74g
Remote tester
Size: 105*38*28mm
Weight: 47
8. iMBAPrice - RJ45 Network Cable Tester for Lan Phone RJ45/RJ11/RJ12/CAT5/CAT6/CAT7 UTP Wire Test Tool with Carry Case
Feature
Automatically runs all tests and checks for continuity, open, shorted and crossed wire pairs. Visible LED status display.Cable state testing (2-wire): Line DC detecting, anode and cathode determination,Ringing signal detecting open, short and cross circuit testing
Cable Type: RJ11 Telephone cable and RJ45 LAN cable
Connectors: Ethernet Cat 5, Ethernet Cat 5e, Ethernet Cat 6, Ethernet Cat 7, RJ11 6P and RJ45 8P
Power Source: DC9V Battery Required (not included)
Description
With iMBPrice continuity tester you can check LAN patch cable (RJ45) and telephone cable (RJ11) for pass, open, short or cross wire. You can quickly test cables using scan mode, or step mode to check connection one contact at a time. Detachable remote unit allows you to test wires already installed. Pop a 9-Volt battery(Not Included) in and you're ready to test the connection to any room in your home or office!9. Vastar Network Cable Tester RJ45 RJ11 RJ12 CAT5 CAT 6 Multi-Functional UTP Network Cable Test Tool, Cable Lan Analyzer
Feature
The network cable tester used for testing rj45 cables, rj11 telephone cables and network cablesSmall and easy carried with smooth lines which is designed drop prevented and portable hand-held
Note: The cable tester can be only used with a certificated 9v battery
Easily switch between slow automatic grade and manual grade, easy to read led display which indicates problems
Keep your network running smoothly by testing wrong connection, short circuit and open circuit
Description
A. Functions:
1. Can test correspondingly double-twisted cables 1, 2, 3, 4, 5, 6, 7, 8 and G, meanwhile, can judge wrong connection, short circuit and open circuit.
2. NS-468 tests RJ 11and RJ45
B. Test of double-twisted cables
Switch on the power. Put cables into both main tester and remote tester. The lights of the main tester will turn on sequently from 1 to G.
Main tester: 1-2-3-4-5-6-7-8-G
Remote tester: 1-4-3-2-5-6-7-8-G
Following are abnormal connections:
1. If one cable, for example cable NO. 3is open circuited, the two NO. 3 lights of The main tester and remote tester will not turn on.
2. If several cables are not connected, several lights will not turn on respectively. If less than two cables are connected, none of the lights is on.
3.If two ends of a cable is disordered, for example NO. 2 and NO. 4, then displays on:
Main tester: 1-2-3-4-5-6-7-8-G
in tester: 1-2-3-4-5-6-7-8-G
Remote tester: 1-4-3-2-5-6-7-8-G
4. If two cables are short circuited, neither of the corresponding lights is on of the remote tester while main tester remains unchanged. If three cables, including three, are short circuited, none of the corresponding lights is on.
C. If test patch panels or wall plate outlels, two cables which can match each other(eg110 P4 and RJ45)will be connected to the tester.
D. If test cables of the same axes, BNC turns on when the cable works.
Main tester
Size: 106*68*27mm
Weight: 68g
Remote tester
Size: 106*38*27mm
Weight: 45g
Package included:
1 x Vastar Cable Tester
1 x Leather Bag
1 x User Manual
Warranty:
45 days money-back & 18-month warranty. For any question, please feel free to contact us. We will get back to you within 24 hours.
10. Tonor TM RJ45 RJ11 RJ12 CAT5 CAT 6 UTP Network Lan Cable Tester Test Tool
Feature
Keep your network running smoothly by testing your cables to uncover problematic shorts, open wires, crossing pairs and other wiring mishapsUse for testing your homemade Ethernet patch cables to make sure they are in working order prior to connecting to your devices
Tests RJ45 cables, RJ11 telephone cables and network cables
Easy to read LED display indicates problems.Hand-held for portability.
Requires one 9-volt battery (not included)
Description
Features:Following are abnormal connections:
If one cable, for example cable NO.3 is open circuited, the two NO.3 lights of the main tester and remote tester will not turn on.
If several cables are not connected, several lights will not turn on respectively. If less than two cables are connected, none of the lights is on.
If two ends of a cable is disordered, for example NO. 2and NO. 4, then displays on:
Main tester: 1-2-3-4-5-6-7-8-G
Remote tester: 1-4-3-2-5-6-7-8-G
If two cables are short circuited, neither of the corresponding lights is on of the remote tester while main tester remains unchanged. If three cables, including three, are short circuited, none of the corresponding lights is on.
If test patch panels or wall plate outlles, two cables which can match each other (RJ45) will be connected to the tester.
If test cables of the same axes, BNC turns on when the cable works.
9V reduplicated battery is used in this tester. Battery is advised to change if any weak light appears.( Battery is not included.)
Color: white
Main tester
Size: 105*67*28mm
Weight: 74g
Remote tester
Size: 105*38*28mm
Weight: 47