When you looking for j link v8, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable j link v8 is not an easy task. In this post, we show you how to find the right j link v8 along with our top-rated reviews. Please check out our suggestions to find the best j link v8 for you.
Reviews
1. Gikfun J-link Emulator V8 JTAG Adapter Converter EK1199
Feature
This Adapter board for the common 20PIN2.54 spacing, 20PIN 2.0 spacing, 10PIN 2.54 spacing, 10PIN 2.0spacing, JTAG 14PIN 2.54 spacing.Description
J-link ULINK2 Emulator V8 all-ARM JTAG Adapter Converter2. Goodqueen ARM Programmer Emulator ARM7 ARM9 ARM11 Cortex-M3 J link V8 ADS IAR STM32 JTAG
Feature
Long life cycles: 1200000 times charge and discharge.This unit seems extremely well built, especially compared to the original inverter. The heat-sink is very solid and the whole case is water tight, great to have on a boat! Output voltage is consistent, regardless of the fluctuating source voltage from the alternators when the boat is running.
Great for building a prototype of an electronic circuit, With referencing numbers printed on one side for easy reference of individual holes.
The scale of the circuit can produce different sounds, while different keys correspond to different scales. The play of the electronic organ is to use the fingers to press different keys to produce different scales.
Note:Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Description
Specifications:USB power supply, the whole current: <50mA
USB Interface USB 2.0 full speed 12Mbps
Target board interfaces
JTAG (20P)
J-Link and target board serial data transfer speed between the 12MHz maximum
Supported target board voltage 1.2 - 3.3V, 5V compatible
Target board power supply voltage 4.5 - 5V (provided by the USB 5V)
Target board power supply current max 300mA, with overcurrent protection
Operating temperature: +5 C-+60 C
Storage temperature: -20 C -+65 C
Humidity: <90%
Size: 10.2x5.2cm/4.02x2.05"
EMC EN 55022, EN 55024
Supported Operating Systems
Microsoft Windows 2000
Microsoft Windows XP
Microsoft Windows XP x64
Microsoft Windows 2003
Microsoft Windows 2003 x64
Microsoft Windows Vista
Microsoft Windows Vista x64
Quantity: 1 Set
Note:
Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you
No Retail Package
Package Includes:
1 x J link V8 ARM Emulator
1 x USB Cable
1 x Connector Cable
3. Yuly New 1Pc High Speed J-Link JLink V8 USB ARM JTAG Emulator Debugger J-Link V8 Emulator HOT
Feature
Electromagnetic compatibility (EMC) EN 55022, EN 55024Relative humidity (non-condensing) Max. 90% rH
100% brand new and high quality
Description
100% brand new and high qualityMaterial: Plastic
Color:?Black
Specifications
Electromagnetic compatibility (EMC) EN 55022, EN 55024
Operating temperature +5C ... +60C
Storage temperature -20C ... +65 C
Relative humidity (non-condensing) Max. 90% rH
Supported Operating Systems
Microsoft Windows XP
Microsoft Windows XP x64
Microsoft Windows 2003
Microsoft Windows 2003 x64
Microsoft Windows Vista
Microsoft Windows Vista x64
Windows 7
Windows 7 x64
Windows 8
Windows 10
Size: See the picture
No retail package
Quantity: 1Pc
Note: Due to the difference between different monitors, the picture may not reflect? the actual color?of the item. Thank you
4. NOYITO J-Link Emulator V8 JTAG Adapter Converter EK1199
Feature
This is a J-Link JTAG converter, which is a good choice for your ARM emulator.It also supports new versions of MINI2440, TQ2440 and popular ARM boards.
This Adapter board for the common 20PIN2.54 spacing, 20PIN 2.0 spacing, 10PIN 2.54 spacing, 10PIN 2.0spacing, JTAG 14PIN 2.54 spacing.
Description
DescriptionThis is a J-Link JTAG converter, which is a good choice for your ARM emulator.
It also supports new versions of MINI2440, TQ2440 and popular ARM boards.
This Adapter board for the common 20PIN2.54 spacing, 20PIN 2.0 spacing, 10PIN 2.54 spacing, 10PIN 2.0spacing, JTAG 14PIN 2.54 spacing.
Package Included:
1pcs J-link Emulator V8 JTAG Adapter Converter
5. FidgetFidget Debugger Programmer Downloader 2pcs J-Link OB ARM Replace v8 SWD M74
Description
Product Description
Description:
J-Link- OB SEGGER developed by a separate set of debugging downloader, usually designed to major companies Evaluation Board ("on-board"), which is the suffix "OB" reasons. Entitled "J-Link- OB" downloader debugger with USB communication with PC communications, and the other end through the JTAG or SWD way communication device can support complete debugging download task.
6. J-Link Emulator V8 All-ARM JTAG Adapter Converter Supports MINI2440,TQ24 1 Pcs
Feature
Quantity : 1 Items / lotJ-link Emulator V8 all-ARM JTAG Adapter Converter Supports MINI2440 ,TQ24
7. The J-link OB ARM Emulator Debugger Programmer Downloader JLINK Instead Of V8 SWD
Feature
the interface is simplified, the four line: VCC, SWDIO, SWCLK, GND four interface, compared to JTAG, can save a variety of IO, high speed, download error search. fully compatible with the traditional J-Link, with all the functions of the J-Link.with the Mirco usb interface (the smart phone with the type of data), general line. 3.3V output, also can give the target marine power supply, convenient debugging and download.
onboard recovery fuse, avoid damage to the circuit board, safer. has a unique ID logo, several devices at the same time troubleshooting is not conflict
with a transparent shrink tube, beautiful and intimate protection. stable work, no loss of the firmware.
The size of the 9, only u-disk, simple circuit, stable and reliable, convenient to move and carry.
Description
J-Link OB is developed by SEGGER, a series of independent simulation troubleshooting search, are generally to large companies on the evaluation board ( "on-board"), which is the suffix "OB" reason. This set of named & ldquo; Whether J-Link-? Simulation download debugger with USB communication function, can communicate with the PC, the other end by SWD / JTAG and can make communication devices, bug fixes simulation download troubleshooting. J-Link OB simulation debugger against the original J-Link OB jtag interface, only retains the swd interface, many companies use the ARM kernel debug-MCU download.Support object:
All swd interface with the ARM7 9 11 and Cortex M0's M2's M3 M4's A5's A8's A9 series embedded microcontroller.The generation of vendors to support MCU
ST (st) and Freecale (Freescale Carle), Nuvoton (Xin Tang), (En Zhipu), TI (TI)
Cypress, for Atmel (SAI Plath), Analog (Adno), Fujitsu (Fuji), for Toshiba
Energy Micro.
connection mode SWD mode
Support IDE software
J-Flash ARM, wedge MDK-ARM, IAR EWARM, CoIDE mikroC, PRO for ARM, nRFgo Studio
Function and performance
Programming function: Shaoxie FLASH-ROM, EEPROM, AFR etc ..
Function: full speed support simulation, single step debugging, stoppoint troubleshooting, and other troubleshooting methods, see IO state variable data. Programming power: with USB2.0 interface, SWD-DOWNLOAD, download-speed!
Performance simulation: simulation debugging, with USB2.0 interface step debugging, halterpunkt debugging, quick response!
The shop alone design and development, technical support, super weapon to study the development of ARM, user-friendliness!
Package included:
1 x J-Link debugger1 x USB cable
1 x 4-pin jumper
8. B Blesiya J-Link OB ARM Debugger Programmer Downloader Replace V8 SWD
Feature
Simplified interface, using four-wire system: VCC, SWDIO, SWCLK, GND four interfaces, high-speed debugging and downloading.Fully compatible with traditional J-Link, with all J-Link functions.
Use Mirco USB interface, universal data cable.
3.3V output, can supply power to target board, convenient for user debugging and program download.
Onboard Self-recovery fuse to avoid damage caused by short circuit, make the board more secure.
Description
Description:
- Simplified interface, using four-wire system: VCC, SWDIO, SWCLK, GND four interfaces, high-speed debugging and downloading.
- Fully compatible with traditional J-Link, with all J-Link functions.
- Use Mirco USB interface, universal data cable.
- 3.3V output, can supply power to target board, convenient for user debugging and program download.
- Onboard Self-recovery fuse to avoid damage caused by short circuit, make the board more secure.
- ESD protection device is added to the signal line.
- It has unique ID identification, and multiple devices do not conflict at the same time.
- Add transparent heat-shrinkable tube, which is more beautiful.
- Stable work, no firmware loss.
Size Chart:
Size: 43.23 x 22.45mm
Package Includes:
1 Piece J-link OB ARM Debugger
1 Piece USB Cable
We strive to offer 5 Star Service in delivery, shipping and after-sales service. If you have any questions, please feel free to contact us. Thank you!
9. Flameer J-Link OB ARM Debugger Replace V8 SWD, High-Speed Debugging and Downloading
Feature
Simplified interface, using four-wire system: VCC, SWDIO, SWCLK, GND four interfaces, high-speed debugging and downloading.Fully compatible with traditional J-Link, with all J-Link functions.
Use Mirco USB interface, universal data cable.
3.3V output, can supply power to target board, convenient for user debugging and program download.
Onboard Self-recovery fuse to avoid damage caused by short circuit, make the board more secure.
Description
Description:
- Simplified interface, using four-wire system: VCC, SWDIO, SWCLK, GND four interfaces, high-speed debugging and downloading.
- Fully compatible with traditional J-Link, with all J-Link functions.
- Use Mirco USB interface, universal data cable.
- 3.3V output, can supply power to target board, convenient for user debugging and program download.
- Onboard Self-recovery fuse to avoid damage caused by short circuit, make the board more secure.
- ESD protection device is added to the signal line.
- It has unique ID identification, and multiple devices do not conflict at the same time.
- Add transparent heat-shrinkable tube, which is more beautiful.
- Stable work, no firmware loss.
Size Chart:
Size: 43.23 x 22.45mm
Package Includes:
1 Piece J-link OB ARM Debugger
1 Piece USB Cable
Your satisfaction is our priority. So we would deliver the highest quality products and services to meet your satisfaction.
10. Yangxiyan 1Pc High Speed J-Link JLink V8 USB ARM JTAG Emulator,J-Link V8 Debugger
Feature
Electromagnetic compatibility (EMC) EN 55022, EN 55024Operating temperature +5C ... +60C ;Storage temperature -20C ... +65 C
Supported Operating Systems:Microsoft Windows XP, Microsoft Windows XP x64,Microsoft Windows 2003, Microsoft Windows 2003 x64, Microsoft Windows Vista, Microsoft Windows Vista x64, Windows 7, Windows 7 x64, Windows 8, Windows 10
Relative humidity (non-condensing) Max. 90% rH
Material: Plastic
Description
100% brand new and high quality
Material: Plastic
Color:Black
Specifications
Electromagnetic compatibility (EMC) EN 55022, EN 55024
Operating temperature +5C ... +60C
Storage temperature -20C ... +65 C
Relative humidity (non-condensing) Max. 90% rH
Supported Operating Systems
Microsoft Windows XP
Microsoft Windows XP x64
Microsoft Windows 2003
Microsoft Windows 2003 x64
Microsoft Windows Vista
Microsoft Windows Vista x64
Windows 7
Windows 7 x64
Windows 8
Windows 10
Size: See the picture
No retail package
Quantity: 1Pc
Note: Due to the difference between different monitors, the picture may not reflect the actual colorof the item. Thank you!!