When you looking for i2c cable, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable i2c cable is not an easy task. In this post, we show you how to find the right i2c cable along with our top-rated reviews. Please check out our suggestions to find the best i2c cable for you.
Reviews
1. Elegoo EL-CB-001 UNO R3 Board ATmega328P ATMEGA16U2 with USB Cable for Arduino
Feature
New improvement: clearly printed on the female header connector, more precise and easier to use the wireThe Uno now uses an ATMega16U2 instead of the ATMega8U2 chip. Faster transfer rates and more memory
Control using ATMEL ATMEGA328P chip
100 percent compatible with the official version, for Arduino uno R3
We have always cared about the customer experience and improve the product function details
Description
We have the manufacture factory, making productions and selling by ourselves. So we can control the quality of our productions by ourselves for you. We'd like to receive your valuable suggestions for our products and make your idea come true. Features * ATmega328P microcontroller * Input voltage - 7-12V * 5V Electric current: 500MA * 3.3V Electric current: 50MA * 14 Digital I/O Pins (6 PWM outputs) * 8 Analog Inputs * 32k Flash Memory * 16Mhz Clock Speed Component listing: 1pcs UNO R3 Development Board 1pcs USB cable.2. Arduino Compatible 4-Pin/I2C Connector, 8" Cable (Pack of 4)
Feature
Length: 205 mm +/- 5MmConnector: 4-pin 2.54Mm pitch (0.1 inch
Wire: Ul1571 -24Awg
Pin mapping: straight through
Contains four 8 inch
Description
OSEPP LS-CAB4P-08 IC Connector, Female/Female, 4-Pin, 8" Cable. Length: 205 mm +/- 5Mm. Connector: 4-pin 2.54Mm pitch (0.1 inch. Wire: Ul1571 -24Awg.3. Gikfun Assorted APM 2.6 2.52 Flight Control Cable (DF13 4/5/6 Position Connector) Pack of 8pcs AE1032
Feature
6P/5P/4P, 20cm4P*2pcs
5P*4pcs
6P*2pcs
Description
Specifications: 6P/5P/4P, 20cmpackage include:
-4P*2pcs
-5P*4pcs
-6P*2pcs
This communication cable uses the DF13 series connector. It is 20 cm long and it is designed to be used on the APM and PX4 board series.
4. SMAKN Pixhawk-i2c Splitter Expand Module for 1 trailer 4 Pixhawk APM Flight Controller
Feature
Pixhawk / APM flight control only one I2C interface, the situation To connect over multiple I2C peripherals, you can use this breakout board; Pixhawk-I2C Breakout Board with five completely parallel vertical 1.25-4 bit socket convenient in 1 trailer 4 is connected four I2C peripherals such situation while using an external compass module with RGB or hope the case of connecting a plurality of RGB modulesPixhawk-I2C module x 1.
4P cable 150mm x1.
Description
*Pixhawk / APM flight control only one I2C interface, the situation To connect over multiple I2C peripherals, you can use this breakout board; Pixhawk-I2C Breakout Board with five completely parallel vertical 1.25-4 bit socket convenient in 1 trailer 4 is connected four I2C peripherals such situation while using an external compass module with RGB or hope the case of connecting a plurality of RGB modules.Package content *Pixhawk-I2C module x 1.
*4P cable 150mm x1.
Feedback: We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help. Our aim is to provide Top Level Customer Service, so we will try our best to solve any problem.Thank you very much!
5. M/F 4-Pin I2C Connector - 4 pack
Feature
Length: 205mm +/- 5mmConnector: 4-pin 2.54mm pitch Wire: UL1007 -24AWG
Pin mapping: straight through
Description
M/F 4-PIN I2C CONNECTOR - 4PC6. Grove I2C Hub - 6 Port with Grove Cable
Feature
Has 6 Grove I2C Plugs - compatible with 4 Grove I2C Port boardsSupports Raspberry Pi, Arduino, ESP32 and ESP8266
Comes with Grove Cable
Can be cascaded
See other Grove parts at www.switchdoc.com
Description
This Grove compatible I2C Hub can connect up to 6 I2C plugs and is cascadable. Compatible with 4 port I2C Hub.7. SparkFun (PID 12942) Bus Pirate - v3.6a with cable
Feature
5.5V tolerant pins. 6V measurement probe1Hz - 40MHz frequency measurement 1kHz - 4MHz pulse-width modulator, frequency generator
On-board multi-voltage pull-up resistors On-board 3.3volt and 5volt power supplies with software reset
Bus traffic sniffers (SPI, I2C)
A bootloader for easy firmware updates
Description
The Bus Pirate v3.6a, created by Ian Lesnet, is a troubleshooting tool that communicates between a PC and any embedded device over 1-wire, 2-wire, 3-wire, UART, I2C, SPI, and HD44780 LCD protocols - all at voltages from 0-5.5VDC. This product eliminates a ton of early prototyping effort when working with new or unknown chips.Working with the Bus Pirate is simple and effective - type commands into a terminal on your computer, those commands are interpreted by the Bus Pirate and sent via the proper protocol. The Pirate will also interpret data sent from your embedded device back to your computer terminal. A big bonus is the bootloader installed on the PIC, which allows you to easily update the firmware and change the functionality of the board.
The main components of the Bus Pirate are the PIC24FJ64 processor and a FT232RL USB-to-Serial chip. A Mini-B USB connector that has also been populated on the board, provides the power to the Bus Pirate and allows you to interact with via your PC. The major difference in this version of the Bus Pirate comes from the shrouded 0.1" pitch 2x5 pin header, which has been flipped around to help standardize this board. Additionally every pin on this header has been labeled, eliminating the need for a separate I/O pin description document like with earlier versions.
Supported protocols:
1-Wire
I2C
SPI
JTAG
Asynchronous serial
MIDI
PC keyboard
HD44780 LCD
2 and 3-wire libraries with bitwise pin control
Scriptable binary bitbang, 1-Wire, I2C, SPI, and UART modes
Note: We include the Bus Pirate Cable
Note: This product is a collaboration with Ian Lesnet. A portion of each sales goes back to them for product support and continued development.
8. I2C_LCD (With universal Grove cable)
Feature
Includes Open Source Software for Arduino and Raspberry PiGraphics and Text - 128*64 pixels
5V
Can be used with the Raspberry Pi with the Pi2Grover Grove Interface
Full Documentation and Software on store.switchdoc.com
Description
The Grove I2C_LCD is an easy-to-use display module. With the Arduino library for I2C_LCD, users just need a few lines of the code to achieve complex graphics and text displays.9. F/F 4-Pin I2C Connector - 4 pack
Feature
Length: 205mm +/- 5mmConnector: 4-pin 2.54mm pitch Wire: UL1007 -24AWG
Pin mapping: straight through
Description
F/F 4-PIN I2C CONNECTOR - 4PC10. UCTRONICS USB Logic Analyzer Device 8CH 24MHz with USB Cable CAN UART I2C SPI Debug for Arduino ARM FPGA SCM M100
Feature
High channel sampling rate: with 8 Channels and each channel sampling rate of 24M/sSample rate type: 24MHz,16MHz,12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz
Support built-in decoders for a variety of protocols, including CAN, I2C, JTAG, SPI, UART, etc
Application: Arduino ARM FPGA M100 SCM
Powered by USB
Description
UCTRONICS logic analyzer device with a USB cable has a high channel sampling rate of up to 24 MHz and has an 8 channels sampling rate of 24 M/s per channel. The software includes built-in decoders for a variety of protocols including CAN, I2C, JTAG, SPI, UART and more. It can be widely used in Arduino ARM FPGA M100 SCM etc.Features:
The number of channels: 8
Sampling rate: 24 MHz
Sampling death: 1T
Sample rate type: 24MHz,16MHz,12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz
Voltage range: 0-5.5V Voltage threshold: 1.5V. Below 1.5V will be considered low level, between 1.5V and 5.5V, will be considered high level.
Size7.9 x 3.7 x 0.4 inches
Weight: 2.88 ounces
Package including
1PCS USB logic analyzer device
1PCS USB cable
2PCS dupont cable
1PCS English user manual
Note: Sampling rates at 4MHz and above will be dependent on system performance including the speed of your computer and the USB interface it is connected to.