When you looking for apm power module, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable apm power module is not an easy task. In this post, we show you how to find the right apm power module along with our top-rated reviews. Please check out our suggestions to find the best apm power module for you.
Reviews
1. FPVDrone Power Module V1.0 XT60 Plug Current Sensor for APM2.8 APM2.6 APM Pixhawk Flight Controller
Feature
The APM 2.5 Power Module is a simple way of providing your APM 2.5 with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable.The APM Power Module are used to detect the battery voltage and the battery current, flight control board receives two signals, calculate the remaining battery power, estimate the remaining flight time.
The on-board switching regulator outputs 5.3V and a maximum of 2.25A from up to a 6S LiPo battery.
The Power Module comes completely assembled with Deans connectors, and wrapped in shrink tubing for protection.
Note: The Power Module is only designed to power APM, a RC receiver and APM accessories (GPS, 3DR radio). It isnotdesigned to power servos. Use your aircraft's own ESC/BEC for that.
Description
The APM 2.5 Power Module is a simple way of providing your APM 2.5 with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. The on-board switching regulator outputs 5.3V and a maximum of 2.25A from up to a 6S LiPo battery. The Power Module comes completely assembled with Deans connectors, and wrapped in shrink tubing for protection.Note: The Power Module is only designed to power APM, a RC receiver and APM accessories (GPS, 3DR radio). It isnotdesigned to power servos. Use your aircraft's own ESC/BEC for that.
Notice:
we have many buyer burned this cable when connet it to 6S battery because he solder the cable to our this module cable.please don't connect or solder any other cable on this current cable,otherwise it will be burned Power Module is a simple way of providing your APM/Arduflyer with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6P cable.
The on-board switching regulator outputs 5.3V and a maximum of 3A from up to a 7S LiPo battery .
Special for APM2.5.2 APM2.6 Pixhawk flight controller.
Specifications:
Max input voltage: 22.2V
Max current sensing: 90A
Voltage and current measurement configured for 5V ADC
Switching regulator outputs 5.3V and 3A max
6-pos DF13 cable plugs directly to APM 2.5's 'PM' connector
Support 6S battery
Package including :
1 * APM Power Module XT60 Plug
If any questions, please do not hesitate to contact us and we will try our best to help you !
2. Power Brick Mini
Feature
Max Input Voltage: 8S (35V)Max DC Current: 30A
3. HobbySoar Power Module Output BEC 3A with XT60 Plug for APM2.5 APM2.6 APM2.8 APM Pixhawk Flight Controller
Feature
For sale is Power Module which is suitable for APM2.5/2.6,Pixhawk Flight controller ,have soldered already, ready to work!The APM Power Module is a simple way of providing your APM FC with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pin cable.
The Power Module comes completely assembled with XT60 connectors, and wrapped in shrink tubing for protection.
Input voltage: 6~28V ,max current sensing: 90A
Note: The Power Module is only designed to flight controller, rc receiver and APM accessories (GPS, 3DR radio). It is not designed to power servos. Pls do not use this to power the servo.Otherwise,due to the large current of servo system, it will seriously affect the reliability of the flight control equipment.If the kit is equipped with a servo,please use the BEC to power the servo system.
Description
Features:Input voltage: 6~28V
Max current sensing: 90A
Voltage and current measurement configured for 5V ADC
Switching regulator outputs 5.3V0.1V and 3A max
6P molex cable plugs directly to APM/Arduflyer 2.5's 'PM' connector
Dimension(mm): 25 x 21 x 9
Weight(g): 17(include all wire)
Package content (Soldered, as picture shows)
Power Module x 1
Connection cable(6P 150mm) for APM/Pixhawk
Note: The Power Module is only designed to flight controller, rc receiver and APM accessories (GPS, 3DR radio). It is not designed to power servos. Pls do not use this to power the servo.Otherwise,due to the large current of servo system, it will seriously affect the reliability of the flight control equipment.If the kit is equipped with a servo,please use the BEC to power the servo system.
4. FPVDrone Power Module XT60 Plug Current Sensor for APM 2.5.2 APM 2.6 Pixhawk Flight Controller
Feature
The APM 2.5 Power Module is a simple way of providing your APM 2.5 with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cableThe on-board switching regulator outputs 5.3V and a maximum of 2.25A from up to a 6S LiPo battery
The Power Module comes completely assembled with deans connectors, and wrapped in shrink tubing for protection
Easy to be used, 6-pos DF13 cable plugs directly to APM 2.5's 'PM' connector,have high quality,very durable
Note: The Power Module is only designed to power APM, a RC receiver and APM accessories (GPS, 3DR radio). It isnotdesigned to power servos. Use your aircraft's own ESC/BEC for that
Description
Specifications:Max input voltage: Support 6S battery
Max current sensing: 90A
Voltage and current measurement configured for 5V ADC
Switching regulator outputs 5.3V and 3A max
6-pos DF13 cable plugs directly to APM 2.5's 'PM' connector
Support 6S battery
Package including:
1 pcs Power Module
Note :
the original connector is for APM or pixhawk controller , if you want to use with Naze32 controller.
please change the wires as the video show :
https://www.youtube.com/watch?v=_YaCexm_yMc
5. Dshot APM2.5.2 APM2.6 Pixhawk Power Module cable V1.0 Output BEC 3A with XT60 Plug
Feature
XT60 Plug Max inputvoltage: 30V Max
current sensing: 90A
Description
Notice:we have many buyer burned this cable when connet it to 6S battery because he solder the cable to our this module cable.please don't connect or solder any other cable on this current cable,otherwise it will be burned Power Module is a simple way of providing your APM/Arduflyer with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6P cable
The on-board switching regulator outputs 5.3V and a maximum of 3A from up to a 7S LiPo battery
Special for APM2.5.2 APM2.6 Pixhawk flight controller
Note:
The Power Module is only designed to power APM/Arduflyer, a RC receiver and accessories (GPS, Radio telemetry)
It is not designed to power servos
Use your aircraft's own ESC/BEC for that
Features:
XT60 Plug Max input voltage: 30V
Max current sensing: 90A Voltage and current measurement configured for 5V ADC Switching regulator outputs 5.3V and 3A max 6P molex cable plugs directly to APM/Arduflyer 2.5's 'PM'
connector Specifications: Dimension(mm): 25 x 21 x 9
Weight(g): 17(include all wire)
Dshot is US trademark,all the Dshot products are selling by our own company,we never Authorize other company to sell it
6. Eztronics Corp APM2.5 APM2.6 Power Module Current Modul T Plug 5.3V DC BEC For RC Model
Feature
Max input voltage: 20VMax current sensing: 90A
Voltage and current measurement configured for 5V ADC
Switching regulator outputs 5.3V and 2.25A max
6-pos DF13 cable plugs directly to APM 2.5's 'PM' connector
Description
Product DescriptionThe APM 2.5 Power Module is a simple way of providing your APM 2.5 with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. The on-board switching regulator outputs 5.3V and a maximum of 2.25A from up to a 4S LiPo battery. The Power Module comes completely assembled with Deans connectors, and wrapped in shrink tubing for protection.
Function:
Used to detect the battery voltage and the battery current, flight control board receives two signals, calculate the remaining battery power, estimate the remaining flight time. In addition the module also comes with BEC function, you can output 5.3 DC, 3A maximum continuous current for the flight control board to provide a stable power supply. Another signal cable connectors are used in Japan original fittings, non-domestic joint, so APM flight control board and reliable connection between the power supply module.
Specifications:
Max input voltage: 20V
Max current sensing: 90A
Voltage and current measurement configured for 5V ADC
Switching regulator outputs 5.3V and 2.25A max
6-pos DF13 cable plugs directly to APM 2.5's 'PM' connector
Note: The Power Module is only designed to power APM, a RC receiver and APM accessories (GPS, 3DR radio). It isnotdesigned to power servos. Use your aircraft's own ESC/BEC for that.
The maximum input voltage 20V, maximum current measurable 90A, to achieve the control panel on battery power and voltage monitoring. The design parameters of voltage and current detector design parameters consistent with 3DR official ground station (mission planer) settings can be set directly refer to the official Wiki.
Package includes:
BEC With T type Connector x1
7. Hobbypower APM Power Module V1.0 XT60 Plug for APM2.8 APM2.6 APM Pixhawk Flight Controller
Feature
The APM Power Module is a simple way of providing your APM FC with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. The on-board switching regulator outputs 5.3V and a maximum of 2.25A from up to a 4S LiPo battery. The Power Module comes completely assembled with Deans connectors, and wrapped in shrink tubing for protection.Used to detect the battery voltage and the battery current, flight control board receives two signals, calculate the remaining battery power, estimate the remaining flight time.
In addition the module also comes with BEC function, you can output 5.3 DC, 3A maximum continuous current for the flight control board to provide a stable power supply. Another signal cable connectors are used in Japan original fittings, non-domestic joint, so APM flight control board and reliable connection between the power supply module.
Description
Features:The APM Power Module is a simple way of providing your APM FC with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. The on-board switching regulator outputs 5.3V and a maximum of 2.25A from up to a 4S LiPo battery. The Power Module comes completely assembled with Deans connectors, and wrapped in shrink tubing for protection.
Used to detect the battery voltage and the battery current, flight control board receives two signals, calculate the remaining battery power, estimate the remaining flight time. In addition the module also comes with BEC function, you can output 5.3 DC, 3A maximum continuous current for the flight control board to provide a stable power supply. Another signal cable connectors are used in Japan original fittings, non-domestic joint, so APM flight control board and reliable connection between the power supply module.
Specifications:
Max input voltage: 30V
Max current sensing: 90A
Size:25*21*9mm
Net weight:25g
Voltage and current measurement configured for 5V ADC
Switching regulator outputs 5.3V and 3A max
6-pos DF13 cable plugs directly to APM 2.5's 'PM' connector
Note: The Power Module is only designed to power APM, a RC receiver and APM accessories (GPS, 3DR radio). It isnotdesigned to power servos. Use your aircraft's own ESC/BEC for that.
The maximum input voltage 20V, maximum current measurable 90A, to achieve the control panel on battery power and voltage monitoring. The design parameters of voltage and current detector design parameters consistent with 3DR official ground station (mission planer) settings can be set directly refer to the official Wiki.
Package include:
1x APM Power Module V1.0
8. Hobbypower Power Module Deans Plug Connector for Pixhawk PX4 APM2.8 APM2.6 Flight Control
Feature
The APM Power Module is a simple way of providing your APM FC with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. The on-board switching regulator outputs 5.3V and a maximum of 2.25A from up to a 4S LiPo battery. The Power Module comes completely assembled with Deans connectors, and wrapped in shrink tubing for protection.Used to detect the battery voltage and the battery current, flight control board receives two signals, calculate the remaining battery power, estimate the remaining flight time.
In addition the module also comes with BEC function, you can output 5.3 DC, 3A maximum continuous current for the flight control board to provide a stable power supply. Another signal cable connectors are used in Japan original fittings, non-domestic joint, so APM flight control board and reliable connection between the power supply module.
Max input voltage: 30V
Max current sensing: 90A
Description
The APM Power Module is a simple way of providing your APM FC with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. The on-board switching regulator outputs 5.3V and a maximum of 2.25A from up to a 4S LiPo battery. The Power Module comes completely assembled with Deans connectors, and wrapped in shrink tubing for protection.Used to detect the battery voltage and the battery current, flight control board receives two signals, calculate the remaining battery power, estimate the remaining flight time. In addition the module also comes with BEC function, you can output 5.3 DC, 3A maximum continuous current for the flight control board to provide a stable power supply. Another signal cable connectors are used in Japan original fittings, non-domestic joint, so APM flight control board and reliable connection between the power supply module.
Specifications:
Max input voltage: 30V
Max current sensing: 90A
Size:25*21*9mm
Net weight:25g
Voltage and current measurement configured for 5V ADC
Switching regulator outputs 5.3V and 3A max
6-pos DF13 cable plugs directly to APM 2.5's 'PM' connector
Note: The Power Module is only designed to power APM, a RC receiver and APM accessories (GPS, 3DR radio). It isnotdesigned to power servos. Use your aircraft's own ESC/BEC for that.
The maximum input voltage 20V, maximum current measurable 90A, to achieve the control panel on battery power and voltage monitoring. The design parameters of voltage and current detector design parameters consistent with 3DR official ground station (mission planer) settings can be set directly refer to the official Wiki.
Package include:
1x Power Module V1.0
9. Hobbypower Shock Absorber Integrated Power Hub PDB Power Distribution Board BEC 12V for APM2.6 APM2.8 Pixhawk PX4 Flight Controller
Feature
Distribution panel, current and voltage sensors, 5VBEC, 12VBEC, damping plate, 5 in 1, copper thickens, over current can reach 90a, and integrates the current and voltage sensors and support 3S-6S input current.suitable for APM, PIX and others, also with 12V and 5VBEC, BEC increased the level of LC filtering, greatly reducing the power output of the ripple, 12V and 5V output is more pure, 12V and 5V support 3A current
integrated into the damping plate, a multi use, can let your aircraft to reduce unnecessary wiring and power module plug can be in line the public version of the APM2.5/2.6/2.8 and PIXHAWK flight control
Description
Features:Distribution panel, current and voltage sensors, 5VBEC, 12VBEC, damping plate, 5 in 1, copper thickens, over current can reach 90a, and integrates the current and voltage sensors and support 3S-6S input current.
Voltage is suitable for APM, PIX and others, also with 12V and 5VBEC, BEC increased the level of LC filtering, greatly reducing the power output of the ripple, 12V and 5V output is more pure, 12V and 5V support 3A current.
New ideas, using black heavy gold PCB board, the APM power module and ESC distribution board are integrated into the damping plate, a multi use, can let your aircraft to reduce unnecessary wiring and power module plug can be in line the public version of the APM2.5/2.6/2.8 and PIXHAWK flight control
Specifications:
Size: 90 x 60 x 8mm/3.5 x 2.4 x 0.3 inch
Delivery size: 150 x 128mm/5.9 x 5 inch
Net weight: 34g
Package weight: 37g
Package included:
1 x Shock Absorber
1 x cable
3 x stickers
1 x manual
10. QWinOut APM2.6 2.5 2.52 Power Module Current Module APM with 5.3V DC BEC for APM 2.8 PIX PIXHAWK RC DIY Drone Accessories
Feature
The on-board switching regulator outputs 5.3V and a maximum of 2.25A from up to a 4S LiPo battery.The Power Module comes completely assembled with Deans connectors, and wrapped in shrink tubing for protection.
ote: The Power Module is only designed to power APM, a RC receiver and APM accessories (GPS, 3DR radio). It is notdesigned to power servos. Use your aircraft's own ESC/BEC for that.
Max input voltage: 25V
For APM 2.5 2.6 2.8 PIX PIXHAWK
Description
The APM 2.5 Power Module is a simple way of providing your APM 2.5 with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. The on-board switching regulator outputs 5.3V and a maximum of 2.25A from up to a 4S LiPo battery. The Power Module comes completely assembled with Deans connectors, and wrapped in shrink tubing for protection.Note: The Power Module is only designed to power APM, a RC receiver and APM accessories (GPS, 3DR radio). It is notdesigned to power servos. Use your aircraft's own ESC/BEC for that.
Specifications:
Max input voltage: 25V
Max current sensing: 90A
Voltage and current measurement configured for 5V ADC
Switching regulator outputs 5.3V and 2.25A max
6-pos DF13 cable plugs directly to APM 2.5's 'PM' connecto
For APM 2.8 PIX PIXHAWK