If you looking for arduino nano shield then you are right place. We are searching for the best arduino nano shield on the market and analyze these products to provide you the best choice.
Reviews
1. ITEAD Arduino Nano I/O Shield
Feature
All digital and analog pins breakoutXBee and nRF24L01+ module interface
External power supply current support
Compatible pin map for electronic brick modules and servos
Description
Nano IO shield is a breakout board for Arduino Nano. It breaks out all pins as a 3pin interface for driving servos or interfacing with sensors, Zigbee XBee Series Modules and nRF24L01 wireless interfaces. Supports 7-12V external power supply.2. Aideepen 5pcs Nano Screw Terminal Adapter Shield Expansion Board Nano V3.0 AVR ATMEGA328P-AU Module for Arduino
Feature
Designed for Arduino Nano V3.0The item is a terminal expansion adapter, working very well for prototyping Arduino Nano projectsFinished ProductThese boards are fully assembled. No soldering required. Size is about 2.21" x 1.65" x 0.50" (L* W* H)
Nice Platform for Wiring CircuitsIt provided a nice platform for wiring circuits to Arduino Nano.It can connect a large number of digital lines to Arduino while maintaining the footprint of the original Nano
Easy to UseYou can use this adapter to easily hook up Arduino Nano to an outside world via hook up wires, and It can be used in conjunction with or in place of a breadboard
Little TipsIt lables for Arduino Nano version 3.0, however you can still use this adapter for the older version (just have to remember that A0-A7 are in the reverse order). Any questions, you can contact me by email at any time
Description
This is a small and simple Arduino nano expansion board.It will lead out all the Nano pins, it is convenient for us to wiring and experiment.
Features:
Great for temporary things you don't want to solder.
It provided a nice platform for wiring circuits to an Arduino Nano. It can be used in conjunction with or in place of a breadboard.
It lets you make a temporary circuit without the reliability issues you get with prototyping boards, but maybe need a bit more effort.
You need to use your Nano to hold the black pin headers straight and flat during soldering.
Size: about 2.21" x 1.65" x 0.50" (L* W* H)
Package Included:
5 x Nano Terminal Adapter Expansion Boards
3. Solu Nano I / O Expansion Sensor Shield Module for Arduino UNO R3 Nano V3.0/nano Pro I / O Expansion Shield for Arduino UNO Nano 3.0 Compatible
Feature
Usually, you will get it actually in 9~19 days, If you are in the USA and the item is NOT Fulfilled by Amazon. the item will be sent to you by USPS with shipping information from China. The estimated delivery time offered by Amazon is not the real time. Your patience is highly appreciated. Hope you will receive your item soon and enjoy using it.About us (Solu ), Professional factory of circuit boards for Arduino.5 I2C expansion Pin
I2C interface on the main board, convenient and connection of the I2C device
Compatible with Arduino or Arduino-compatible Nano v3.0
14 I/O Pin (servo type with GND, power and signal)
Description
About us (Solu ), Professional factory of circuit boards for Arduino, welcome to our store for more choices with best price. What we pursue is your satisfication of our service, not just for our goods.For any reason you are unsatisfied with our product at any time, simply contact support for exchange or refund. we will reply you about any question you ask within 24 hoursSpecifications :
This IO Expansion Shield is specifically designed to facilitate an easy connection between Arduino Nano and many other devices. used for Arduino Nano direct, if your seal the Pin of the board also Compatible Arduino Duemilanove 2009 and UNO R1. AREF output
3.3V output
8 analog Pin with power output and GND
6 PWM Pin
1 Servo power input
I2C expansion Pin
Draw out all of the digital I/o mouth and analog I/o mouth, every IO mouth has the positive and negative power supply interface standard
Increase the DC power supply interface.
The NANO plate on the USB interface power supply current is actual only 50 ma, to bring high current equipment such as steering gear
Size:6x5.3x1.3cm(approx)
Package Includes :
1 * Expansion Shield for Arduino Nano *
4. HiLetgo Nano I/O Expansion Sensor Shield for Arduino UNO R1 Nano 3.0 Duemilanove 2009
Feature
14 I/O Pin (servo type with GND, power and signal)8 analog Pin with power output and GND
6 PWM Pin
1 Servo power input
5 I2C expansion Pin
Description
Features :Nano IO Expansion Shield is specifically designed to facilitate an easy connection between Nano and many other devices. In essence, it expands the Nano controller to link those devices in a simple and trouble free manner. It is a perfect companion of Nano breadboard and compatible with both Arduino Nano v2.x and v3.x.
This expansion shield provides:
*14 I/O Pin (servo type with GND, power and signal)
*8 analog Pin with power output and GND
*6 PWM Pin
*1 Servo power input
*I2C expansion Pin
*AREF output
*3.3V output
Package Included:
1 * Nano I / O Expansion Sensor Shield
5. ELEGOO for Arduino Nano V3.0, Nano Board CH340/ATmega328P Without USB Cable, Compatible with Arduino Nano V3.0 (Nano x 3 Without Cable)
Feature
You could download the driver of Elegoo Nano V3.0 at: http://bit.ly/2jKlJMOThe Nano is using the chips ATmega328P and CH340, not FT232 as official Arduino, so pls. use the driver from above link.
It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper.
Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
Description
The Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x). It has more or less the same functionality of the Arduino/Genuino UNO, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one.You could download the driver of Elegoo Nano V3.0 at: http://bit.ly/2pMF4in
Technical specs
Microcontroller: ATmega328
Architecture: AVR
Operating Voltage: 5 V
Flash Memory: 32 KB of which 2 KB used by bootloader
SRAM: 2 KB
Clock Speed: 16 MHz
Analog I/O Pins: 8
EEPROM: 1 KB
DC Current per I/O Pins: 40 mA (I/O Pins)
Input Voltage: 7-12 V
Digital I/O Pins: 22
PWM Output: 6
Power Consumption: 19 mA
PCB Size: 18 x 45 mm
Weight: 7 g
Package Include :
3 X Nano Board
ATTENTION:
We dont have USB cables in this kit and you will need to buy a mini USB cable to use this NANO board.
6. Areyourshop 5x Prototype Shield I/O Expansion Module Extension Board for Arduino Nano V3.0
Feature
Draw out all of the digital I/o mouth and analog I/o mouth, every IO mouth has the positive and negative power supply interface standard Lead the I2C interface on the main board, convenient and connection of the I2C deviceIncrease the DC power supply interface. The NANO plate on the USB interface power supply current is actual only 50 ma, to bring high current equipment such as steering gear, when I was at this time in DC power supply interface provides an external power supply, ensure the stability of equipment operation.
14 I/O Pin (servo type with GND, power and signal) 8 analog Pin with power output and GND 6 PWM Pin
1 Servo power input I2C expansion Pin
AREF output 3.3V output Size:6x5.3x1.5cm
Description
100% brand new and high quality
Draw out all of the digital I/o mouth and analog I/o mouth, every IO mouth has the positive and negative power supply interface standard
Lead the I2C interface on the main board, convenient and connection of the I2C device
Increase the DC power supply interface. The NANO plate on the USB interface power supply current is actual only 50 ma, to bring high current equipment such as steering gear, when I was at this time in DC power supply interface provides an external power supply, ensure the stability of equipment operation.
14 I/O Pin (servo type with GND, power and signal)
8 analog Pin with power output and GND
6 PWM Pin
1 Servo power input
I2C expansion Pin
AREF output
3.3V output
Size:6x5.3x1.5cm
Package Included:
5Pcs
Note: We only provide the hardware,If you need software, please search on Google.
7. Emakefun for Arduino Nano V3.0, Nano board ATmega328P 5V 16M Micro-controller board with USB cable (Pre-soldered Nano 5pcs)
Feature
CH340G Replace FT232RL,so pls. use the driver from this link:https://github.com/emakefun/emakefun-nano-kitTheUpgradedEmakefun Nano is a small, complete, breadboard-friendly andhigh qualityboard based on the Atmega328P-AU MCU.Adopting Immersion Gold Technology. Support ISP download, USB download and USB Power
No Soldering needed.TheUpgradedEmakefun Nano improved the design of PCB to solve the issue that the pins of Nano can't fit to breadboard perfectly. When you use our upgraded Nano, you will find the Pins arealigned nicely with the holes of breadborad
Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. We use high quality PCB original material and iproved produce technology to make sure every board has smooth edge and more reliable quality
It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27).
Description
Specification: CH340G Replace FT232RL. Operating Voltage(logic level): 5V. 8 analog inputs ports:A0 ~ A7. 14 Digital input / output ports:TX,RX,D2 ~ D13. 6 PWM ports:D3, D5, D6, D9, D10, D11. 1 pairs of TTL level serial transceiver ports RX / TX. Support USB download and Power. Support for external 5V ~ 12V DC power supply. Support power supply by 9V battery. Support ISP download. Package including: 5 x Arduino Nano V3.0 with ATMEGA328P Module (welded) 1 x USB Cable8. WYPH Nano Terminal Adapter for Arduino Nano V3.0 AVR ATMEGA328P-AU Module Board
Feature
This is a terminal adapter for the Arduino NanoIt lables for Arduino Nano version 3.0
You can use this adapter to easily hook up Arduino Nano to an outside world via hook up wires
Pack of 1pcs
Description
This is a terminal adapter for the Arduino Nano. It lables for Arduino Nano version 3.0, however you can still use this adapter for the older version (just have to remember that A0-A7 are in the reverse order). You can use this adapter to easily hook up Arduino Nano to an outside world via hook up wires.Package Included:
- 1 X Terminal Adapter board for the Arduino Nano V3.0 AVR ATMEGA328P-AU Module
9. Qunqi Prototype Nano I/O Expansion Shield Sensor Module for Arduino UNO Nano 3.0
Feature
Lead All the digital IO port and analog IO port, each IO port has a standard positive and negative power interfaceI2C interface on the main board, convenient and connection of the I2C device
Lead the I2C interface on the motherboard to facilitate the connection with the I2C device
Increase the DC power supply interface. NANO board USB interface, the actual power supply current is only 50MA, to bring high-current equipment such as steering gear when it is obviously insufficient, this time in the DC power supply interface to provide external power supply to ensure the stability of equipment operation
Compatible with Arduino Nano v3.0
Description
Specification:14 I/O Pin (servo type with GND, power and signal)
8 analog Pin with power output and GND
6 PWM Pin
1 Servo power input
I2C expansion Pin
AREF output
3.3V output
Size:6x5.3x1.3cm(approx)
Package Include :
1 x NANO 3.0 Shield Expansion Shield
10. Anmbest 5PCS Nano Screw Terminal Adapter Shield Expansion Board DIY Kits for The Arduino Nano V3.0 AVR ATMEGA328P CH340G
Feature
The terminal expansion kit is designed for any version of Nano that conforms to the Arduino. The kit comprises of a circuit board measuring approximately 55mm x 37mm, 2x 15 pin o.1" pitch sockets, and 10x 3 pin screw terminal blocks.The expansion board is a terminal adapter for the Arduino Nano. It lables for Arduino Nano version 3.0, however you can still use this adapter for the older version (just have to remember that A0-A7 are in the reverse order). You can use this adapter to easily hook up Nano to an outside world via hook up wires.
Once constructed (soldering required) the completed kit will allow you to plug your Nano into the header socket and will then provide a convenient means of connecting wires to your Nano via its screw terminal blocks. Two mounting holes on the adaptor board provide a means of securing the board and Nano.
Each pin is clearly marked. The mounting holes are well-spaced and you dont need a special small-head screw to mount this. Screw blocks are easy enough to insert/remove wires and screwdriver. It expands for Arduino Nano controller to link those devices in a simple and trouble free manner.
Specifically designed to facilitate an easy connection between expansion shield for Arduino Nano and many other devices.
Description
Technical Specifications:PCB size: Approx. 55*37mm/2.16*1.46 inch (L*W)
PCB Board color: Green
Net weight: Approx.22g
Package includes:
5 x Nano Screw Terminal Adapter Shield Expansion Board
Each set contains: 1x PCB2x 15 way 0.1" pitch SIL sockets10x 3 pin screw terminal blocks
Note:
This is a DIY Kit. You need to weld the component and install it by yourself. DIY kit installation requires some basic electronic production and practical ability, there is the risk of damage during the process of installing.