If you looking for ads1256 module then you are right place. We are searching for the best ads1256 module on the market and analyze these products to provide you the best choice.
Reviews
1. WINGONEER ADS1256 24bit 8channel ADC AD module high precision ADC acquisition data
Feature
On-board high precision TI ADS1256IDB ADC chipsOn-board ADR03 2.5V datum voltage source chips
Data output rates up to 30ksps, nonlinearity is low to 0.0010
The module can be configured as either 8 single-ended inputs or 4 differential inputs ADS1256 module is suitable for measuring analog voltage within 3V
Module operating voltage is 5V The board size:35*60mm
Description
WINGONEER trademark Reg.NO:4747611WINGONEER ADS1256 24bit 8channel ADC AD module high precision ADC acquisition data
Overview:
ADS1256 8 road 24-bit ADC module mounted TI ADS1256IDBminimum Power consumptionhigh precision ADC chips and 2.5V datum voltage source, using SPI interface communication protocol, data output rates up to 30ksps, support single-ended input and differential input.
The function and characteristics
On-board high precision TI ADS1256IDB ADC chips
On-board ADR03 2.5V datum voltage source chips
Data output rates up to 30ksps, nonlinearity is low to 0.0010
The module can be configured as either 8 single-ended inputs or 4 differential inputs
ADS1256 module is suitable for measuring analog voltage within 3V
Module operating voltage is 5V
The board size:35*60mm
Instructions:
5VGND5V power input
SCLKDINDOUTCSSPI communication Interface
DRDYADS1256data be ready output (Active low level)
PDWNADS1256 Sync / Turn off the power input (Active low level)
AIN0-AIN7Analog voltage input, it can be configured as either 8 single-ended inputs or 4 differential inputs,(The measured voltage should be shared with the module)
Interface description:
VCC, RXD, TXD, GND: UART interface
VCC, SDA, SCL, GND: I2C interface
MISO,MOSI,SCK,CS2,CS1,CS0,GND,VCC: SPI interface
Precautions:
Because the voltage of ADS1256 is 5V,and The measured voltage should be 2V below the supply voltage, so The module is only suitable for measuring analog voltages within 3V.
Package included:
1x WINGONEER ADS1256 24bit 8channel ADC AD module high precision ADC acquisition data
2. Bobury ADS1256 24-bit ADC AD Module ADS1256 Module Analog-to-Digital Conversion High Precision ADC Acquisition Card
Feature
LP2985, LDO can effectively suppress the low frequency noise, produces a very pure +5V, to provide analog power for the ASD1256ADR431BRZ, B series for high precision benchmark. Reference chip to produce a high precision 2.500000V benchmark
Analog inputs, AIN0-AIN7 a total of eight input ports, can be regarded as 8 independent single input, can also do a 4 differential input, AIN0 and AIN1 as a group, AIN2 and AIN3 AIN4 and AIN5 AIN6 and AIN7
Input resistance and attenuation resistance. Decay resistance is not welded by default
Power input terminal, the upper is ground, the lower end is +5V
Description
DescriptionThe module can be configured as either 8 single-ended inputs or 4 differential inputs ADS1256 module is suitable for measuring analog voltage within 3V.
On-board high precision TI ADS1256IDB ADC chips.
On-board ADR03 2.5V datum voltage source chips.
Data output rates up to 30ksps, nonlinearity is low to 0.0010.
Module operating voltage is 5V The board size:35*60mm.
Specification:
Color: show as pictures.
Size: 60 * 35mm.
Note:
There might be a bit color distortions due to different computer resolutions.
There might be size errors due to different computer resolutions.
Package include:
1 * module.
3. Baoblaze ADS1256 24 Bit 8 Channel ADC AD Module High Precision ADC Data Acquisition Card, Suitable for Measuring Analog Voltage within 3V
Feature
The module can be configured as either 8 single-ended inputs or 4 differential inputs ADS1256 module is suitable for measuring analog voltage within 3V.On-board high precision TI ADS1256IDB ADC chips.
On-board ADR03 2.5V datum voltage source chips.
Data output rates up to 30ksps, nonlinearity is low to 0.0010.
ADS1256 module is suitable for measuring analog voltage within 3V; Module operating voltage is 5V.
Description
Description:
- The module can be configured as either 8 single-ended inputs or 4 differential inputs ADS1256 module is suitable for measuring analog voltage within 3V.
- On-board high precision TI ADS1256IDB ADC chips.
- On-board ADR03 2.5V datum voltage source chips.
- Data output rates up to 30ksps, nonlinearity is low to 0.0010.
- ADS1256 module is suitable for measuring analog voltage within 3V; Module operating voltage is 5V.
- Board Size: 60 x 35mm
Package Includes:
1 Piece ADS1256 Module
Note:
Color maybe slightly different due to different monitor.
The above size is measured by hand, please allow slightly difference. Thanks !
We have many years of experience in selling merchandise online, we are focus on providing best product and service to customers.
4. MagiDeal ADS1256 Module 24 Bit 8 Channel High Precision ADC Data Acquisition Board
Feature
The module can be configured as either 8 single-ended inputs or 4 differential inputs ADS1256 module is suitable for measuring analog voltage within 3V.On-board high precision TI ADS1256IDB ADC chips.
On-board ADR03 2.5V datum voltage source chips.
Data output rates up to 30ksps, nonlinearity is low to 0.0010.
ADS1256 module is suitable for measuring analog voltage within 3V; Module operating voltage is 5V.
Description
You will find what you want in Sports & Outdoors, Home & Kitchen, Beauty, Clothing, Health & Household, Tools & Improvement, Automotive Parts etc.
Description:
- The module can be configured as either 8 single-ended inputs or 4 differential inputs ADS1256 module is suitable for measuring analog voltage within 3V.
- On-board high precision TI ADS1256IDB ADC chips.
- On-board ADR03 2.5V datum voltage source chips.
- Data output rates up to 30ksps, nonlinearity is low to 0.0010.
- ADS1256 module is suitable for measuring analog voltage within 3V; Module operating voltage is 5V.
- Board Size: 60 x 35mm
Package Includes:
1 Piece ADS1256 Module
Note:
Color maybe slightly different due to different monitor.
The above size is measured by hand, please allow slightly difference. Thanks !
5. ADS1256 24 Bit 8 Channel ADC AD Module High Precision ADC Acquisition Data Acquisition Card - Arduino Compatible SCM & DIY Kits
Feature
Package Includes: 1 x ADS1256 24 Bit 8 Channel ADC AD ModuleOn-board high precision TI ADS1256IDB ADC chips
On-board ADR03 2.5V datum voltage source chips
Data output rates up to 30ksps, nonlinearity is low to 0.0010%
The module can be configured as either 8 single-ended inputs or 4 differential inputs
Description
Overview:ADS1256 8 road 24-bit ADC module mounted TI ADS1256IDB, minimum Power consumption, high precision ADC chips
and 2.5V datum voltage source, using SPI interface communicationprotocol, data output rates up to 30ksps, support
single-ended input and differential input.
Features:
On-board high precision TI ADS1256IDB ADC chips
On-board ADR03 2.5V datum voltage source chips
Data output rates up to 30ksps, nonlinearity is low to 0.0010%
The module can be configured as either 8 single-ended inputs or 4 differential inputs
ADS1256 module is suitable for measuring analog voltage within 3V
Module operating voltage is 5V
The board sizeis 35*60mm
Interface Descriptions:
5V, GND: 5V power input
SCLK, DIN, DOUT, CS: SPI communication Interface
DRDY: ADS1256data be ready output (Active low level)
PDWN: ADS1256 Sync / Turn off the power input (Active low level)
AIN0-AIN7: Analog voltage input, it can be configured as either 8 single-ended inputs or 4 differential inputs,
(The measured voltage should be shared with the module)
Precautions:
Because the voltage of ADS1256 is 5V, and The measured voltage should be 2V below the supply voltage,
so The module is only suitable for measuring analog voltages within 3V.
Testing Methods:
Module provides STC15W and STM32 microcontroller 8-channel serial display reference program and STC89C52 single-chip
4-channel 1602LCD display reference program, the STC89C52 Microcontroller + 1602 LCD LCD test method is as follows:
5V, GND connect to DC 5V power supply, SCLK, DIN, DOUT, DRDY, CS connect to Microcontroller P1.2, P1.3, P1.4, P1.5, P1.6 respectively,
AIN0, AIN1, AIN2, AIN3 connect to 2.5V, 2.5V, 2.5V,2.5V respectively (The measured voltage should be in common with the ADS1256),
then 1602 LCD will shows these four sets of voltage values, in which, the 1st ,2nd ,4th sets are single-ended input
6. Compatible SCM & DIY Kits Module Board - ADS1256 24 Bit 8 Channel AD Module High Precision Acquisition Data Acquisition Card - 1 x ADS1256 24 Bit 8 Channel ADC AD Module
Feature
Overview: ADS1256 8 road 24-bit module mounted TI ADS1256IDB, minimum Power consumption, high precision chipsand 2.5V datum voltage source, using SPI interface communicationprotocol, data output rates up to 30ksps, support
single-ended input and differential input.
Feature:
Compatible SCM & DIY Kits Module Board - ADS1256 24 Bit 8 Channel AD Module High Precision Acquisition Data Acquisition Card - 1 x ADS1256 24 Bit 8 Channel ADC AD Module
Description
Overview: ADS1256 8 road 24-bit module mounted TI ADS1256IDB, minimum Power consumption, high precision chipsand 2.5V datum voltage source, using SPI interface communicationprotocol, data output rates up to 30ksps, support
single-ended input and differential input.
Feature:
On-board high precision TI ADS1256IDB ADC chips
On-board ADR03 2.5V datum voltage source chips
Data output rates up to 30ksps, nonlinearity is low to 0.0010%
The module can be configured as either 8 single-ended inputs or 4 differential inputs
ADS1256 module is suitable for measuring analog voltage within 3V
Module operating voltage is 5V
The board sizeis 35*60mm
Interface description:
5V, GND: 5V power input
SCLK, DIN, DOUT, CS: SPI communication Interface
DRDY: ADS1256data output (Active low level)
PDWN: ADS1256 Sync / Turn off the power input (Active low level)
AIN0-AIN7: Analog voltage input, it can be configured as either 8 single-ended inputs or 4 differential inputs,
(The measured voltage should be shared with the module)
Precautions:
Because the voltage of ADS1256 is 5V, and The measured voltage should be 2V below the supply voltage,
so The module is suitable for measuring analog voltages within 3V.
Testing Methods:
Module provides STC15W and STM32 microcontroller 8-channel serial display reference program and STC89C52 single-chip
4-channel 1602LCD display reference program, the STC89C52 Microcontroller + 1602 LCD test method is as follows:
5V, GND connect to 5V power supply, SCLK, DIN, DOUT, DRDY, CS connect to Microcontroller P1.2, P1.3, P1.4, P1.5, P1.6 respectively,
AIN0, AIN1, AIN2, AIN3 connect to 2.5V, 2.5V, 2.5V,2.5V respectively (The measured voltage sh
7. SYEX ADS1256 Module 24 Bit ADC AD Module High-precision ADC Data Acquisition Card
Feature
SYEX ADS1256 Module 24 Bit ADC AD Module High-precision ADC Data Acquisition CardDIY card making baby shower Suppliers
Cheap cards phone
Integrated Circuits
card sensor
Description
Type : Voltage Regulatoris_customized : Yes
Model Number : ADS1256 Module
Brand Name : ReYeBu
Condition : New
Application : Instruments and Apparatuses
ADS1256 Module 24 Bit ADC AD Module High-precision ADC Data Acquisition Card
Description:
1 power input terminal, the upper is ground, the lower end is +5V.
2.LT3461 power chip, high ripple noise rejection ratio.
3 power indicator light.
4.LP2985, LDO can effectively suppress the low frequency noise, produces a very pure +5V, to provide analog power for the ASD1256
5.ADR431BRZ, B series for high precision benchmark. Reference chip to produce a high precision 2.500000V benchmark
6 benchmark test hole.
7 analog inputs, AIN0-AIN7 a total of eight input ports, can be regarded as 8 independent single input, can also do a 4 differential input, AIN0 and AIN1 as a group, AIN2 and AIN3 AIN4 and AIN5 AIN6 and AIN7.
8 analog grand input port
9 input resistance and attenuation resistance. Decay resistance is not welded by default.
10.ADS1256 master chip.
11.AMS1117-3.3v, to provide digital voltage for ADS1256.
12.The brand of NSK crystal, 7.68MHZ
13 communication interface with MCU.
Package Included:
1 * ADS1256 module
8. Waveshare Raspberry Pi AD/DA Expansion Sheild Board for Adding High-Precision AD/DA Functions to Raspberry Pi Onboard ADS1256 DAC8552 Sensor Interface
Feature
The High-Precision AD/DA Board allows you to add high-precision AD/DA functions to the Raspberry PiOnboard ADS1256, 8ch 24bit high-precision ADC (4ch differential input), 30ksps sampling rate
Onboard DAC8552, 2ch 16bit high-precision DAC, up to 30MHz output
Onboard input interface via pinheaders, for connecting analog signal
Features AD/DA detect circuit, easy for signal demonstration
Description
Overview
There's no AD/DA function on the Raspberry Pi GPIO interface, this may trouble you in the Pi development. However, it won't be a problem anymore. The High-Precision AD/DA Board allows you to add high-precision AD/DA functions to the Raspberry Pi.
Supported Pi
Raspberry Pi 1 Model A+
Raspberry Pi 1 Model B+
Raspberry Pi 2 Model B
Raspberry Pi 3 Model B
Raspberry Pi 3 Model B+
Features
Onboard ADS1256, 8ch 24bit high-precision ADC (4ch differential input), 30ksps sampling rate
Onboard DAC8532, 2ch 16bit high-precision DAC
Onboard input interface via pinheaders, for connecting analog signal
--e pinout is compatible with Waveshare sensor interface standard, easy to connect various analog sensor modules
Onboard input/output interface via screw terminals, for connecting analog/digital signal
Features AD/DA detect circuit, easy for signal demonstration
Package Content
1.High-Precision AD/DA Board x 1
2.RPi screws pack (2pcs) x 1
If you have any question, please feel free to contact me on Amazon.
9. Compatible SCM & DIY Kits Module Board - ADS1256 24 ADC8 Road AD-precision Data Acquisition Module - 1 xADS1256 24 ADC8 Road AD-precision ADC Data Acquis
Feature
1. A0-A7 has 8 input channels, which can be easily configured as differential input and single-ended input.2. Low noise low temperature drift Vishay wafer metal film resistors.
3. Input filter (104), one for each channel.
4. High speed low noise LDO, high power supply rejection ratio, low quiescent current.
Compatible SCM & DIY Kits Module Board - ADS1256 24 ADC8 Road AD-precision Data Acquisition Module - 1 xADS1256 24 ADC8 Road AD-precision ADC Data Acquis
Description
jslist list_layout" aria-cont="productdetails"> Features:1. A0-A7 has 8 input channels, which can be easily configured as differential input and single-ended input.
2. Low noise low temperature drift Vishay wafer metal film resistors.
3. Input filter (104), one for each channel.
4. High speed low noise LDO, high power supply rejection ratio, low quiescent current.
5. Digital signal high-frequency attenuation resistor to isolate external high-frequency noise.
6. ADR03 2.5V voltage reference, composed of 0.1Hz~10Hz low-pass filter circuit through OPA350 high-speed buffer, large-capacitance tantalum and ceramic used in parallel and using low-noise metal film wafer resistor, effectively suppress low-frequency noise.
7. 100uF large-capacity filter tantalum capacitors and inductors form an LC filter circuit to make the power supply more pure.
8. Separate the analog signal ground from the digital signal ground.
9. Added GND, 2.5V, 3.3V test points to make the debugging circuit more convenient.
Package included:
1 xADS1256 24 ADC8 Road AD-precision Data Acquisition Module
10. Homyl 5V ADS1256 24 Bit 8 Channel ADC AD Module High-precision ADC Data Acquisition Board Analog Voltage Measurement
Feature
Data output rates up to 30ksps, nonlinearity is low to 0.0010.Suitable for daily wear, great swimwear, bikini, beachwear and holiday wear
On-board high precision TI ADS1256IDB ADC chips.
ADS1256 module is suitable for measuring analog voltage within 3V; Module operating voltage is 5V.
On-board ADR03 2.5V datum voltage source chips.
Description
Description:
- The module can be configured as either 8 single-ended inputs or 4 differential inputs ADS1256 module is suitable for measuring analog voltage within 3V.
- On-board high precision TI ADS1256IDB ADC chips.
- On-board ADR03 2.5V datum voltage source chips.
- Data output rates up to 30ksps, nonlinearity is low to 0.0010.
- ADS1256 module is suitable for measuring analog voltage within 3V; Module operating voltage is 5V.
- Board Size: 60 x 35mm
Package Includes:
1 Piece ADS1256 Module
Note:
Color maybe slightly different due to different monitor.
The above size is measured by hand, please allow slightly difference. Thanks !
Choose all you need in our store. You will have a nice purchase experience and get quality products and service corresponding to the policy of Amazon.