When you want to find hf amplifier power, you may need to consider between many choices. Finding the best hf amplifier power is not an easy task. In this post, we create a very short list about top 10 the best hf amplifier power for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 hf amplifier power:
Reviews
1. Toogoo 1MHz-700MHZ 3.2W HF VHF UHF FM Transmitter RF Power Amplifier For Ham Radio
Feature
Application:Broadband RF power amplifier for all types of wireless applications, FM shortwave radios remote control toys, digital radio, etc., enter 1 milliwatt (0DBM) maximum output of 3 watts, 15V voltage supply, broadband work 1MHZ to 700MHZ can be work. As a result of well-designed, low end that can reach 35DBM (3W), at 500M, the output power can reach 32DBM (1.6W), please refer to the specific parameters S21 and point frequency test chart.
Amplifier size 37MM * 56CM * 1.5CM (behind with a large heat sink).
color: green
Material: metal
Description
* TOOGOO is a registered trademark. ONLY Authorized seller of TOOGOO can sell under TOOGOO listings.Our products will enhance your experience to unparalleled inspiration.TOOGOO(R) 1MHz-700MHZ 3.2W HF VHF UHF FM Transmitter RF Power Amplifier For Ham Radio
Technical indicators:
1.supply voltage: + 15V DC (typical current 450mA / gain maximum output)
2.the operating frequency: 1MHZ-700MHZ, input and output impedance: 50 ohms
3.the maximum output amplitude: 35dbm (3.2W / 50 Ohm)
4. Gain: 35 dB (see specific curves S21 curves, different frequencies are different)
5.the input signal Size: low frequency (0DBM / 1 mW), high frequency (2DBM)
Note:
Do not power it when there is no signal input or output is not connected to load.
Package included:
1 x 1MHz-700MHZ 3.2W HF VHF UHF FM Transmitter RF Power Amplifier For Ham Radio
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
2. FidgetFidget Power Amplifier DIY KIT MINIPA 100W SSB linear HF For YAESU FT-817 KX3 AM CW FM
Description
Feature :
Notice: it is DIYKIT , without heastink
1.Operating frequency band 1.8 - 54 MHz
2. power supply voltage: 12V-16V
3. current: 12A
4.max input power:5W
5.max output power: 100W(13.8V/80W;16V/100W)
6. air cooling: forced fan cooling
Warning: the output is forbidden to open circuit, short circuit, the prohibition of Bobbi 2 or more
7.Size: 50 x 100 mm
3. Zowaysoon 45W HF Power Amplifier for QRP Radio FT-817 IC-703 KX3 Enhancing Transmission Power (KX3 + FT-817 adapter+Bare wire,need weld by you)
Feature
1. Operating frequency: 80m 40m 30m-17m 15m-10m2. Work mode: SSB CW AM,RTTY and FM-Reduced duty cycle
3. 5W Input Power, 45W Output Power
4. Power Requirements: 13.8V 8A///Antenna Interface: SO-239 50
5. MX-P50A hf power amplifier, for QRP transceiver, Improve signal. Can be used bothas a base and mobile unit, Extremely Small Compact and light weight, Full integrationwith the FT-817 using the supplied interface cable, The amplifier incorporatesvarious protection circuits such as high VOLTAGEfront mounted LED display
Description
MX-P50M hf power amplifierfor QRP transceiverImprove signalCan be used bothas a base and mobile unit, Extremely Small Compact and light weight
Full integrationwith the FT-817 using the supplied interface cable,
The amplifier incorporatesvarious protection circuits such as high VOLTAGEfront mounted LED display
This amplifier can be successfully used with other QRP rigs such as the ICOMIC-703(and Elecraft KX3).
YAESU FT-817ND Quick operating manual:
1. Connect power cord to DC power supplier, Red to "+", Black to" -"
2. Connect ACC cable to FT-817 ACC and amp
3. Adjustment "BAND ADJ" buttonSelect the band.
4. Connect antenna to amp "ANT" and "input" from FT-817 antenna out.Notice! Theantenna you used that should well tuned, the SWR should less than 1:1.5
5. Open the power on both power supplier and AMP. The power indicate on.
6. Power on FT-817, the band indicate on Amp shoule be on.
7.Press PTT, the TX indicate on Amp should be on.
Notice! If working onFM or SSTV for long operating time, should lower the output power on FT-817,say 2.5W or 1W.
Other QRP transceiver operating manual:connect acc cable to transceiver PTT-TX and amplifierACC green to"GND"REDTO"TX-PTT"the radio "TX-PTT"view manual.
Specifications
Frequency Band80m40m30m-17m 15m-10m
Operating ModesSSB CW AMRTTY and FM-Reduced duty cycle
Rf input5WOut
power40-50W
Band modeManual
Power requirement13.8V(11-15V) 8ARED "+"BLACK "-"
Cooling method:passive air cooling
Antenna connectorSO-23950
Size155*100*35mmD*W*H
Weight0.55KG
4. FidgetFidget Amplifier 45W HF Power For YASEU FT-817 ICOM IC-703 Elecraft KX3 QRP Ham Radio
Description
Specifications :
- Frequency Band: 80m 40m 30m-17m 15m-10m
- Operating Modes: SSB CW AM
- Rf input: 5W
- Out power: 45W
- Band mode: Encoder Manual, ACC auto
- Power requirement: 13.8V 8A
- Cooling method:passive air cooling
- Antenna connector: SO-239 50Ohm
- Size: 120*84*38mm L*W*H
- Weight: 0.55KG
5. Ampeg BA115v2 1 x 15-Inch Combo Bass Amplifier
Feature
150 watts RMS powerAmpeg Ultra Hi/Lo tone shaping
Legacy Ampeg preamp with 3-band EQ
Bass Scrambler overdrive delivers SVT grind (footswitch optional)
1 HF tweeter and True 60sound reinforcement monitor angle
Description
Ampeg BA115v2 1 x 15-Inch Combo Bass Amplifier
BA Series Bass Combos - Classic Tone. Modern Flexibility. Rugged Portability.
View larger
View larger
BA-115 15 inches Bass Combo - The world's most popular combo
View larger
View larger
Ampeg BA-115 15 inches Bass Combo
The Ampeg BA-115 Bass Combo delivers classic Ampeg tone with features designed for maximum performance for the gigging musician. Featuring the revolutionary new Bass Scrambler overdrive, this amp delivers classic tube-like grind. The BA-115 also features a true 60 monitoring angle with front-facing controls, auxiliary inputs and a headphone jack for silent practice. Delivering classic Ampeg tone at volume levels perfect for the stage, the BA-115 is the ultimate portable, powerful 15 inches combo.
Classic Ampeg Tone
Ampeg is known for its classic tone and the new BA series is no exception. Each amp offers legacy Ampeg preamps and tone stack circuits for an extensive choice of classic Ampeg tone. BA series amps feature perfectly matched Ampeg Custom speakers, designed specifically to get the most out of your BA combo.
Modern Flexibility
The new BA Bass Combos feature an all-new cabinet design with a true 60 sound reinforcement monitor angle which provides an increase in clarity. This flexible design directs sound directly at your ears even in small spaces. Front-facing controls make adjustments quick and easy in both the upright and wedge position. Players can easily transition from a true monitor angle for added clarity or a traditional upright position for added bass response.
Rugged Portability
Featuring a protective all-steel amp chassis, impact-resistant metal corners and rugged embraced enclosures, BA Series Bass Combos are designed for the long haul. Created for performance and portability, these amps are ready to go wherever you do.
Features
- 150 watts RMS Power
- 15 inches Ampeg Custom15 speaker
- Bass Scrambler overdrive delivers SVT grind
- 1 inch HF tweeter
- Ampeg Ultra Hi/Lo tone shaping
- Legacy Ampeg preamp with 3-band EQ
- True 60 sound reinforcement monitor angle
- Dedicated XLR balanced line out
- Independent effect send and return
- HF mute defeats horn for a rounder, more vintage tone
- Aux input for playing along with smartphone or iPod
- Headphone output for silent practice
- Roadworthy braced cabinet construction
- 45.0 lbs / 20.4kg
BA Series Bass Combos |  View larger BA-108 |  View larger BA-110 |  View larger BA-112 |  View larger BA-115 |  View larger BA-210 |
|---|---|---|---|---|---|
True 60 sound reinforcement monitor angle | |||||
Bass Scrambler overdrive for SVT grind | |||||
XLR Line Out | |||||
Front-facing controls | |||||
Ultra Hi/Lo controls | |||||
Extension speaker output | |||||
-15dB input pad | |||||
Independent effects send and returns |
6. NAGOYA NA-300N HF Transceiver HF Powe Amplifier for Handheld CB Radio with FM-SSB-CW-AM
Feature
The HF Handheld CB Radio Amplifier most effective working frequency is 20-30 MHz , and with the situations of working under20 MHz, the v.s.w.r will be higher and also the heat dissipation will be higher.This HF Handheld CB Radio Amplifier working general output for AM & FM mode is around 100W and the most effective output isaround 200 W with input 5 W and around 200-250 when the input is 10W.
If you want to reach the HF HandheldCB Radio Amplifier PE MAX output, please check that the input should exactly 10W or 5W,the DC Power should actually be over 14V and 18A and also other conditions should be perfecT. Different mode have the different input requirement.
However, we do not suggest to work theHF Handheld CB Radio Amplifier PE Max for a long time,it will decrease the amp' life time and also if the antenna can not endure the output watt, which will damage the amp,thank you very much!
During the programming of investigating regular customers of the HF Handheld CB Radio Amplifier , over two thirds of the customers leave the mssage that they need to put a additonal fan to cool the Amplifier when it is working.They think sometimes, when a fan is not availabel, it will get much more business. Also, considering that the high degree of heat dissipation will affect the amp's working efficiency, our engineers decided to put a fan on the amplifier. It does greatly ease the problem.
Description
Handheld Radio Frequency range: HF(20-30MHz)Handheld Radio Amplifier Operate voltage :12-14 Vcc
Handheld Radio Input current:14-20 A
Handheld Radio Input power:3-5 W
SSB input power:2-10 W
Handheld Radio Amplifier FM Output power Max : 150 W(Input 10W), Normal 70W to 100W
Handheld Radio Amplifier AM Output power Max :150 W(Input 10W),Normal 70W to 100W
Handheld Radio Amplifier SSB output power Max: 300 W(Input 10W)Normal 150W to 250W
Max 250W (Input 5W ),Normal 100W to 200W
Handheld Radio Amplifier 's Working mode FM- AM-CW-SSB
Handheld Radio Amplifier 's Blown fuse 2x12 A
Dimension 109x225x35 mm
Net weight 750 g.
Product Description
Compact high power all mode amplifier with automatic TX/Rx switch and On/Off switch.
Electronic switch. Inversion polarity protection.
Something New and impirtance about the Updated Version:
Q1. Why chose such a " loud voice " fan to put on the amp.
A1. Dear friend, if it is that at the first, we got two kinds of the fans to consider ---- one is with lower noise and cost but just with lower rotate speed, while another one is with a louder noise and higher cost, but the HF Handheld CB Radio Amplifier works more perfectly and feectively with hiher rotate speed. So, we choose the later one, although the noise is louder but it does work well with the heat dissipation.
Warm prompt:
1. To reach the Max output, the input power also should be the MAX. 2. The input power should be within the range, or it will be damaged. 3. The different modes work under different conditions, so please check instruction before using it.
7. TWAYRDIO TW-300N HF High Power Amplifier for Handheld Ham CB Radio with a Mini Fan
Feature
TWAYRDIO TW-300N HF Amplifier best effect Frequency range:20-30mhz.( Works on 15 meter, 12 meter and 10 meter).Operate voltage 13.8Vcc.Input current/POWER:14-20 A. Input power(FM/AM/CW):3-5 W Input power (SSB):2-10 W. Compact high power all mode amplifier with automatic TX/Rx switch and On/Off switch.
HF amplifier bellow 20Mhz the output power will be lower and vswr will be higher than 20-30Mhz.Connection of antenna is very important for low frequency product , the effect of the antenna will seriously affect HF amplifier effect.
New design, adding an external fan can also cool the amplifier, this is low frequency amplifier, the high power output will cause to amplifier internal heat, so the mini fan will give amplifer best help, which can extend its life.
The amplifier different model ,such as FM,AM,SSB,CW. Please learn about how to operate when you want to purcahse. Or ask for us and give professional advice.
Description
This model can be amplify for HF radio.1.Turn on/off switch
2.Auto receive/transmit switch
3.Electrode reversal protect
Specifications
Frequency range: HF(HF Amplifier best effect Frequency range:20-30mhz.( Works on 15 meter, 12 meter and 10 meter)
Operate voltage:12-14Vcc
Input current/POWER:14-20A
Input power:3-5W
Input power SSB:2-10W
FM Output power:PEP Max 150 W(Input 10W)(Note: Note:Normal the output power is 70-100W)
AM Output power:PEP Max 150 W(Input 10W) (Note:Normal the output power is 70-100W)
Output power SSB:300 W(Input 10W) PEP Max 250W (Input 5W ) PEP Max(Note:Normal the output power is 120-250w)
Working mode:FM- AM-CW-SSB
Note:if you will test the max PE power to FM/AM 150W or SSB 300w,you can try use input 10w from FM/AM /SSB radio but please don't use too long time, the operate will cause damage to power transistor, more serious will cause the amplifier to burn out.
Blown fuse:2x12 A
Product Description
Compact high power all mode amplifier with
automatic TX/Rx switch and On/Off switch. Electronic switch.
Inversion polarity protection.
Packing Incudes:1*TWAYRDIO TW-300N Amplifier
8. Walmeck 45W SSB AM Linear Power Amplificateur CW FM Power Amplifier HF Radio Transceiver Shortwave DIY Kit
Feature
Common used in SSB, AM linear power amplifier, the CW, FM, power amplifier, and the most basic signal amplification.Easy installation and operation.
Low noise, high cost performance, very suitable for DIY enthusiasts.
Our product is sent by parts, which not include heat radiator, please help yourself to assemble.
The overall gain more than 40db, which is 10000 times, 10W input 1mW output.
Description
Specifications:Input Power: 1-5mW
Output Power: 45W (Max.)
Input Voltage: DC 13.8V 10A or higher
Max. Output Power: 57W (not with cooling fin)
Output Impedance: 50 ohm, can according to need to adjust between 10-200 ohm
Input Frequency Range: 3M-30MHz(HF channel)
Input/Output Interface: Standard SMA interface, external thread hole
PCB Size: 60 * 100 mm
Diameter of Located Hole: 3mm
Color: Green
Package Size: 13 * 8 * 1.5cm
Package Weight: 58g / 2.07oz
Note:
-The following data to test in person, these data sheet is in a large heat sink can withstand 200W above measured, there is not enough cooling capacity, please do not limit, it's not safe.
-The upgrade board test data,so it can be used for all HF Channel,
-In 3 to 5 MHz this period, because of the low frequency, small inductance, lead to the gain has a certain loss, the output power is lower than 7 MHz this point.
3.500MHz 54W
7.050MHz 56W
10.000MHz 57W
14.270MHz 55W
21.400MHz 41W
24.000MHz 37W
28.100MHz 25W
29.600MHz 20W
Package List:
1 * SSB Linear Power Amplifier
English User Manual:
https://www.dropbox.com/s/k6a1zbv7ou9m5kj/E1585-English%20User%20Manual.pdf?dl=0
The Winding Method of Magnetic Coils:
https://www.dropbox.com/s/2d92imnguqsoo0g/E1585-the%20Winding%20method%20of%20Magnetic%20coils%20V306.pdf?dl=0
9. HF Power Amplifier For YASEU FT-817 ICOM IC-703 Elecraft KX3 QRP Ham Radio
Feature
HF power amplifierfor QRP transceiver Improve signalCan be used both as a base and mobileunit,Extremely Small Compact and lightweight Full integration with the FT-817 using the supplied interface cable,This amplifier can be successfully used with other QRP rigs such as the ICOM IC-703(and Elecraft KX3).
Using : Press encoder 3 seconds or more power, the default manual mode, you can switch the band rotary encoder; short press coder into the automatic mode, the automatic mode indicator lights, the band switching control by external ACC line; press the encoder over 3 seconds shutdown
Frequency Band80m 40m 30m-17m 15m-10m , Operating ModesSSB CW AM
Rf input5W ,Out power45W
Description
SpecificationsFrequency Band80m 40m 30m-17m 15m-10m
Operating ModesSSB CW AM
Rf input5W
Out power45W
Band modeEncoder Manual, ACC auto
Power requirement13.8V 8A
Cooling method:passive air cooling
Antenna connectorSO-239 50
Size120*84*38mmL*W*H
Weight0.55KG
Package list:
1x AMP
1x Power cord
1x for FT-817ND ACC control cable
10. SODIAL 1MHz-700MHZ 3.2W HF VHF UHF FM Transmitter RF Power Amplifier For Ham Radio
Feature
Application:Broadband RF power amplifier for all types of wireless applications, FM shortwave radios remote control toys, digital radio, etc., enter 1 milliwatt (0DBM) maximum output of 3 watts, 15V voltage supply, broadband work 1MHZ to 700MHZ can be work. As a result of well-designed, low end that can reach 35DBM (3W), at 500M, the output power can reach 32DBM (1.6W), please refer to the specific parameters S21 and point frequency test chart.
Amplifier size 37MM * 56CM * 1.5CM (behind with a large heat sink).
color: green
Material: metal
Description
* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings.Our products will enhance your experience to unparalleled inspiration.SODIAL(R) 1MHz-700MHZ 3.2W HF VHF UHF FM Transmitter RF Power Amplifier For Ham Radio
Technical indicators:
1.supply voltage: + 15V DC (typical current 450mA / gain maximum output)
2.the operating frequency: 1MHZ-700MHZ, input and output impedance: 50 ohms
3.the maximum output amplitude: 35dbm (3.2W / 50 Ohm)
4. Gain: 35 dB (see specific curves S21 curves, different frequencies are different)
5.the input signal Size: low frequency (0DBM / 1 mW), high frequency (2DBM)
Note:
Do not power it when there is no signal input or output is not connected to load.
Package included:
1 x 1MHz-700MHZ 3.2W HF VHF UHF FM Transmitter RF Power Amplifier For Ham Radio
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.