When you want to find grooving router bits, you may need to consider between many choices. Finding the best grooving router bits is not an easy task. In this post, we create a very short list about top 8 the best grooving router bits for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 8 grooving router bits:
Reviews
1. Magnate 728 V-Grooving Router Bits - 120 Degree; 2" Cutting Diameter; 1/2" Shank Diameter
Feature
2 Flute Carbide Tipped ; 120 Degree;; 120 Degree; 2" Cutting Diameter; 1/2" Shank Diameter11/16" Cutting Length; 1-1/2" Shank Length
Description
These bits make both shallow and deep grooves in solid wood and composition boards. Can be used for decorative veining of drawers and cabinets. Also good for sign lettering. When used with the Legacy Ornamental Mill, this bit can be used to chamfer square to round transitions. It can also be used to mill a diamond pattern on flat or spindle stock. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. It is also equipped with wide open gullets for easy disposal of wood chips. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Note : In order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. Excessive overall length may cause tool damage. In case a bit doesn't come with a speed chart. You may try the following suggestion. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness: Run 24,000 rpm maximum for 1" overall diameter router bits; Run 18,000 rpm maximum for 1-1/4" overall diameter router bits; Run 16,000 rpm maximum for 2-1/4" to 2-1/2" overall diameter router bits; Run 12,000 rpm maximum for 3" to 3-1/2" overall diameter router bits;2. Freud 1/2" (Dia.) V Grooving Bit with 1/4" Shank (20-104)
Feature
Overall Dia. (D) 1/2", Carbide Height (h) 7/16", 1/4" ShankCuts all composition materials, plywoods, hardwoods, and softwoods.
Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
Kickback reducing design
Individually computer balanced
Precision ground for the smoothest cuts
Covered by Freud's limited lifetime warranty
Description
Ideal for making signs and adding decorative accents to furniture and plaques, Freud's "V" grooving bits are designed to cut deep or shallow "V" grooves.3. EnPoint Round Grooving Carbide-Tipped 2 Flutes Radius Core Box Router Bit 1/2" Shank 1.13" Cut Diameter 0.7" Cut Height Woodwroking Industrial Quality Long Reach CNC Round Nose Router Bit
Feature
Have a solid carbide cutting egde brazed onto a HSS steel shank and body for sharp cuts, long lifeThis fluting cutter cuts half-round grooves for decorative columns, finger pulls, sill drip nails
Teflon coating for build-up heat resistant; high grade carbide keeps its edge with no edge chipping
Two flutes: sturdy and vibration-free; the bit is well balanced and does not pull to one side
Designed for cutting Laminate, MDF, Veneered Plywood, Wood Panels
Description
Specifications:Bit Type: Round nose bit
Shank diameter: 1/2 inch (12.7mm)
Cutter diameter: 1.13 inches (28.6mm)
Cutter height: 0.7 inch (17.5mm)
Total length: 2-9/32 inches (58mm)
Material: High-speed steel body and shank, carbide-tipped edge
Application:
1. Commonly used for sign-making, and are also ideal for fluted columns, millwork, finger pulls, drain grooves on cutting boards, drip rails for window sills and more.
2. Can cut rounded grooves and slots perfectly for a variety of materials from wood panels, flakeboard, plywood, MDF and other wood composites sheet materials; can also be used in all handled and table mounted routers.
Package: Pack of 1
Note: The metric sizes were relatively accurate
4. Yonico 16101 10 Bit Architectural Molding Router Bit Set 1/2-Inch Shank
Feature
Industrial Quality Router BitsC3 Micro-grain Tungsten Carbide Cutters
Solid Hardened Steel Bodies with Anti-Kickback Design
Build-up & Heat Resistant Teflon Coating
Satisfaction Guaranteed & Lifetime Warranty
Build-up and Heat Resistant Teflon Coating
Satisfaction Guaranteed and Lifetime Warranty
Description
Boost your molding router bit collection with the Yonico 10 bit architectural molding router bits set (16101). From base to case. from ceiling to floor, this fabulous assortment of Yonico molding router bits will yield thousands of molding design possibilities limited only by the imagination! Great for architectural mill work including: baseboards, chair rails, door casings, panel moldings, picture frames, window sills and much, much more. You will not find a more valuable collection! The expense of buying single high quality molding router bits places the value of this set at way more than its price. Bits are industrial quality, made of premium k10 carbide and double fluted. Set includes a beautiful solid wood storage case for easy and convenient storage. All router bit shanks are 1/2".5. 2Pcs Tongue and Groove Router Bit, Grooving Router Bit, 3 Teeth T Shape, 1/4"" Shank Wood Milling Saw Cutter New Woodworking Tools
Feature
High quality material with long service time.Build-up & Heat Resistant Teflon Coating
Solid Hardened Steel Bodies with Anti-Kickback Design
Provides much convenience to your daily woodworking.
Description
Specification:Material: carbide alloy
Color: yellow
Coating: Yes
Size: 1/4*1/4 inch
Cutting thickness: 6.35mm
Tooth width: 6.35mm
Tooth depth :12.7mm
Yellow paint processing board size: 13-19mm
Package included:
1xTongue Router Bit
1xGroove Router Bit
6. Hiltex 10100 Tungsten Carbide Router Bits | 15-Piece Set
Feature
Precisely machined sharp YG8 tungsten carbide blade makes clean and accurate cuts on all types of wood with excellent resistance to heatHardened solid alloy steel main construction with power coating finish for durability and longevity
Enclosed bearing roller for smooth and aligned operations with 1/4 inch universal shank fits all models of routers
Comes with wooden index case for easy storage and organization
Perfect for edging, trimming, veining and grooving in all woodworking projects for both professional carpenters and hobbyists
Description
Solid carbide flush trim. " With Ball Bearing: Flush Trim Bit: 1/2"" Corner Round Bit3/4"" 45DegreeChamfer Bit: 1/2"" Cove Bit1/2"" Roman Ogee Bit5/16"" ".7. Yonico 14460q 4 Bit Round Nose Router Bit Set, Plunge 1/4-Inch Shank
Feature
Industrial Quality Router BitsC3 Micro-grain Tungsten Carbide Cutters
Solid Hardened Steel Bodies with Anti-Kickback Design
Build-up & Heat Resistant Teflon Coating
Satisfaction Guaranteed & Lifetime Warranty
Build-up and Heat Resistant Teflon Coating
Satisfaction Guaranteed and Lifetime Warranty
Description
The Yonico 14460q round nose router bit set is a multi function set otherwise known as core box bits. Cut grooves in virtually anything wood such as drawers, doors, trimming and columns. Great for sign making and wooden toy grooving. Includes 4 round nose router bits with the following measurements: 3/8" Diameter Long Reach - no Bearing - 1" Cutter Height, 2-5/8" Overall Height 1/2" Diameter with Bearing - 1-1/4" Cutter Height, 2-7/8" Overall Height 5/8" Diameter with Bearing - 1-1/4" Cutter Height, 2-7/8" Overall Height 3/4" Diameter with Bearing - 1-1/4" Cutter Height, 2-13/16" Overall Height Two flute carbide cutters and 1/4" shanks.8. Diablo 3/4 in. x 1/2 in. Carbide V Grooving Router Bit