When you want to find arduino line follower, you may need to consider between many choices. Finding the best arduino line follower is not an easy task. In this post, we create a very short list about top 10 the best arduino line follower for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 arduino line follower:
Reviews
1. SunFounder IIC I2C Line Follower Module 8 Channel Infrared IR Detection Tracking Sensor for Arduino Smart Car Robot Robotics MCU STM8S105C4 TCRT5000
Feature
Uses the MCU STM8S105C4 as the controller, and the TCRT5000 infrared photoelectric sensor on each of the 8 line-following modulesAdopts I2C ports which only occupies 4 pins of the MCU
The sensor TCRT5000 is highly sensitive with reliable performance(SensingDistance12mm , 8mmwill be the best
With a RESET button on the board for resetting, and positioning holes on the board for easy assembly
Supply Voltage: 5V; PCB Dimensions: 124mm x 30mm
Description
IntroductionThe TCRT5000 infrared photoelectric switch adopts a high transmit power infrared photodiode and a highly sensitive phototransistor. It works by applying the principle of objects' reflecting IR light -the light is emitted, then reflected, and sensed by thesynchronous circuit. Then it determines whether there exists an object or not by the light intensity. It can easily identify black and white lines. In other words, the different conduction levels of the phototransistor when it passes over black and white lines can generate different output voltages. Therefore, all we need to do is to collect data by the AD converter on the STM8S105C4 and then send the data to the master control board via I2C communication.
This module is an infrared tracking sensor onethat uses a TRT5000 sensor. The blue LED of TRT5000 is the emission tube and after electrified it emits infrared light invisible to human eye. The black part of the sensor is for receiving; the resistance of the resistor inside changes with the infrared light received.
Note: When the module is working, it's normal to get heated. And this module is not compatible with Raspberry Pi.
More details can be found in http://wiki.sunfounder.cc/index.php?title=Line_Follower_Module
Package Included
1 x Tracking Sensor Module
1 x 4-Pin anti-reverse Cable
2. SunFounder Remote Control Robot Smart Car Kit V2.0 for Arduino Uno R3 Ultrasonic Line Follower Sensor IR Receiver
Feature
A complete robot kit based on Arduino - for better learning, an elaborately-written user manual, detailed assembly tutorials, and schematic diagrams are provided.With the sample sketches provided, you can control the car remotely via IR module, and make it follow lines, track hand and avoid obstacle.
Many I/O ports reserved on the Sensor Shield for you to install more sensors for function extension.
Gives interesting experience of assembly - you can really build a robot from scratch and make it move as you want, which is great achievement!
Working Voltage: 7V-12V; Size: 280 x 153 x 83mm; Powered by two 18650 rechargeable lithium batteries
Description
IntroductionThis smart car robot kit is a great platform to get started with robots. What we provide are multiple parts, instructions and code needed, so you need to assemble them by yourself, with the help of the user guide. During the course you can thus enjoy the fun of making! Based on the manual in the kit package, you can make the car all by yourself and then create your own sketch to realize different movements of the car as you want. It supports remote control, line following, hand tracking and obstacle avoidance. For further exploration, a sensor shield is used so that there can be more I/Os from the SunFounder Uno, to which more parts can be connected.
Download the user manual and code needed on our LEARN page:
https://www.sunfounder.com/learn/category/smart-car-kit-v2-0-for-arduino.html
Package Included 1 Set x Acrylic Plate
1 set x Screws
1 x Tower Pro MG995 Micro Servo
2 x Gear Motor
2 x Driven Wheel
2 x Driving Wheel
1 x SunFounder Uno
1 x Sensor Shield
1 x DC Motor Driver Module
1 x Step-down DC-DC Converter Module
1 x Switch Module
1 x HC-SR04 Ultrasonic Module
1 x Line Follower Module
1 x IR Receiver Module
1 x IR Remote Controller
1 x 18650x2 Battery Holder
1 x Ribbon (13cm)
1 x USB Data Cable (1m)
1 set x Jumper Wires
1 x Cross Screwdriver
1 x Cross Socket Wrench
1 x Heat Shrink Tube
Self-provided Parts
2 x 18650 Rechargeable Li-ion Battery (3.7V) without protection circuit board
3. Line Tracking Sensor Infrared IR Detection - SunFounder I2C 5-Channel Line Follower Module for Raspberry Pi Arduino Smart Car Robot Robotics MCU ATMEGA328P TCRT5000
Feature
High Grade - Uses the MCU ATMEGA328P as the controller and the TCRT5000 infrared photoelectric sensor on each of the 5 line follower modules.Less Interfaces - Adopt I2C ports which only occupies 4 pins of the MCU.
High Accuracy - The sensor TRT5000 is highly sensitive with reliable performance.
Easy Assembly - With two 3mm positioning holes on the board for easily assemble with other robots.
Adjustable Sensibility - A potentiometer is added to adjust sensitivity if the signal of the black lines is too weak to detect. Normally you don't need to adjust.
Description
IntroductionThis 5-channel line follower module adopt ATMEGA328P microprocessor and change analog data get from five TCRT5000 sensors into digital signal in infrared tracking sensor. The different conduction levels of the phototransistor when it passes over black and white lines will generate different output voltages, thus it can easily identify black and white lines.
There are also RESET key and potentiometer that can regulate sensitivity to adjust to different conditions. MCU read and write interface is helpful to transfer data to MCU. The IC interface save more spaces. 5V is the work voltage. There are two positioning holes at the module to assemble with smart car or other robots.
Package Included
1 x Ultrasonic Module
1 x 4-Pin Anti-reverse Cable
4. 4-Channel Infrared IR Line Track Follower Sensor Module Obstacle Avoidance PCB for Smart Car/ Arduino
Feature
When the module detects obstacles signal, red indicator lights on and OUT port continuous outputs low voltage level signals at the same timeDetection distance can be adjusted with potentiometer, clockwise to increase and counterclockwise to reduce
Target reflectivity and shape is the key point of detection distance. Small and black objects have minimum detection distance, while large and white ones have maximum distance
Output port can be directly connected to the SCM IO port, also can drive a 5V relay module or buzzer module directly
Widely used in robot obstacle avoidance, car obstacle avoidance, assembly line counting and black white line tracking
Description
This module provides a versatile infrared detection system solutions for automation machinery devices such as smart cars, robots. The sensor module is adaptable to ambient light. It has a pair of infrared transmitting and receiving tube. Transmitting tube sends out a certain frequency IR which will be reflected when detecting obstacles (reflecting surface) and received by receiving tube. After processing with comparator circuit, signal output interface outputs digital signal (a low voltage level signal).
Specifications:
Working Voltage: 3.3V-5V DC
Working Current: >1A
Detection Distance: 2~60cm
Detection Angle: 35
Size:
Big Board: 42*38*12mm
Small Board: 25*12*12mm
Mounting Hole Diameter: 3mm
Note:
1, Do not put probe toward sunlight. Sunlight will cause interference to module.
2, Sensitivity should not be regulated excessively high because high sensitivity can easily lead to false trigger.
Package Includes:
1 x Infrared Tracking Module Set
5. OSOYOO 10PCS IR Infrared Obstacle Avoidance Sensor Module for Arduino Smart Car Robot
Feature
IR Infrared Obstacle Avoidance Sensor Module can be widely used in robot obstacle avoidance, obstacle avoidance car, line count, and black and white line tracking and so onthe module detects the distance 2 ~ 30cm, detection angle 35 , the distance can detect potential is adjusted
The output port OUT sensor module can be directly connected to the microcontroller IO port, you can directly drive a 5V relay
it has a pair of infrared transmitting and receiving tube, tube infrared emit a certain frequency, when detecting direction meet with obstacles (reflecting surface), reflected infrared receiving tube, after the comparator circuit processing, green indicator will light up, at the same time signal output interface to output digital signal (a low level signal).
Can be used for 3-5V DC power supply modules. It has red power indicator.
Description
The IR Infrared Obstacle Avoidance Sensor Module detection range can be through the potentiometer to adjust and have small interference, easy to assemble, easy to use. It can be widely used in robot obstacle avoidance, obstacle avoidance car, line count, and black and white line tracking and so onOn-line tutorial: http://t.cn/Rg0P3eS
Specification
The output port OUT sensor module can be directly connected to the microcontroller IO port , you can directly drive a 5V relay ;
the module detects the distance 2 ~ 30cm, detection angle 35 , the distance can detect potential is adjusted
Can be used for 3-5V DC power supply modules
When the power is turned on, the red power indicator light
Using the comparator LM393
Interface :
1. VCC: External 3.3V-5V voltage (can be directly connected to 5v MCU and 3.3v MCU)
2. GND: GND External
3. OUT: Small board digital output interfaces (0 and 1)
Connection : VCC-VCC; GND-GND; OUT-IO
With the screw holes of 3mm , easy fixed installation
Board Size : 3.1CM * 1.5CM / 1.22 * 0.59"
Package includes:
10 x Infrared Obstacle Avoidance Module
6. SMAKN TCRT5000 Single Channel Infrared Line Track Follower Sensor Module
Feature
Product Name : Track Sensor Module;Model No. : TCRT5000;
Output Channel : 1
Working Voltage : 3.3V-5V;
Detect Distance : 1-8mm
Description
Product Name : Track Sensor Module;Model No. : TCRT5000;
Output Channel : 1
Working Voltage : 3.3V-5V;
Detect Distance : 1-8mm
Focal Distance : 2.5mm;
PCB Size : 32 x 14mm/ 1.3" x 0.55" (L*W)
Hole Size : 3mm/ 0.12";
Material : Electric Part
Net Weight : 3g;
Package Content : 1 x Track Sensor Module
Application: electricity meter pulse data sampling, fax paper shredder detection, obstacle detection,
black and white line detection.
Designed with reflected infrared sensor, indicator light.
Built in a potentiometer for sensitivity control.
7. Makeblock mBot Robot Kit, DIY Mechanical Building Block, STEM Education, Entry-Level Programming Improves Kids' Logical Thinking and Creativity, Compatible with LEGO(Blue, Bluetooth Version, Family)
Feature
Proudly presented by Makeblock, a global leading brand in STEAM education solution that has integrated in 140+ countries.Don't judge it by size, he is a real robot that has many modes to play with, like obstacle avoidance, line-follow and etc. It is easy to build within 15 mins and can be controlled by remote or smartphones through Makeblock App (Apple/Android). Suitable for age 8+.
It's up to you to decide if you wants to follow the guide or DIY it with your own imagination to make your mBot completely differ from everyone else, You can also upgrade it by purchasing the add-on package of mBot to DIY more forms of mBot.
Code it from all platform, the mBlock Blockly App (iOS/Android) is a great place to train the logical thinking for new coders. The advanced mBlock software (PC/MAC) is one of the most popular entry-level coding platform with more than 450,000+ users that helps you to bring your creativity into reality.
Battery Requirements: 4 pcs AA batteries or 1 pcs 3.7V 1800mAh Lithium for mBot and CR2025 coin battery for Remote. Batteries are not included.
Description
Children Safeguard Compared to the previous verison, mBot V1.1 with a casing specially designed for protecting main control board, which is atomized to safeguard children's eyes from the glare of the onboard LED. Better Auxiliary Wheel The ball omni-directional wheel of previous version is replaced by a mini nylon caster wheel that performs better when moving to any direction and dramatically reduces the little clack sound caused by a steel ball. Contracted But Not Simple Contains 38 assembly parts that can be assembled in 10 minutes and color-labeled RJ25 ports for convenient wiring, making sure more time can be spent on programming and creativity. Graphical Programming Drag-and-drop graphical programming software mBlock developed based on Scratch 2.0 provides a quick way to learn programming, control the robot, and realize multiple functions from the robot. Fun, and Fun mBot is all about fun and creativity. It comes with various basic pre-assembled options, including obstacle-avoidance car, line-following vehicle, remote control car, and can be used in multiple games like balloon bursting game, soccer playing, sumo, and etc. NOTE: mBot V1.1 - STEM Educational Robot Kit come with 1 pc IR remote control as a gif Part List: 1x Chassis 1x Route Map 1x Battery Holder 1x IR Controller 1x mCore Case 1x USB Cable 1x mCore 1x Bluetooth 1x Screw Driver 1x Me Line Follower 1x mBot Li Battery Shell 1x Mini Caster Wheel 1x Me Ultrasonic Sensor 2x Motor 2x Wheel 2x Velcro 2x 6P6C RJ25 Cable 4x Screw M2.2 x 9 4x Brass Stud M4 x 25 6x Screw M3 x 25 8x M3 Nut 15x Screw M4 x 8 Package Size:21.50 x 18.00 x 10.2 centimeter Package Weight:1.003 killogram8. WINGONEER 5PCS Line Hunting Sensor Module Works with Official Arduino Boards
Feature
Working power: + 5V;Working current: < 10mAWorking temperature range: 0'C 50'C
Output electrical level signal: TTL
Output interface: 3 wire
Easy to install
Description
WINGONEER trademark Reg.NO:4747611VCC/OUT/GND pin connector
Power Supply: 2.5-12V (cannot over 12V)
Working current: 18-20mA at 5V
Output electrical level signal: Low level when detecting objects/ high level when no objects/0 or 1 decides if objects exist)
Great DIY parts for intellig
Package Includes:
5 x Hunt sensor module
9. Doradus TCRT5000 IR Infrared Line Track Follower Sensor Obstacle Avoidance Module For Arduino
Feature
TCRT5000 IR Infrared LineTrack Follower Sensor Obstacle
Electronics
Please Allow 7-23 Business Days For Delivery
Package Contains One Item
Description
TCRT5000 IR Infrared Line Track Follower Sensor Obstacle Avoidance Module For Arduino Features: TCRT5000 sensors constantly emit infrared infrared emitting diodes, infrared rays emitted when reflected or not reflected but the intensity is not big enough, the infrared receiver has been in the off state, then the output of the module is low, indicating diode remains off state; when the object appeared to be detected in the detection range, the infrared rays are reflected back and of sufficient intensity, infrared receiver tube saturation, the output side module is high, indicator LED is lit. Description: 1. TCRT5000 infrared reflective sensor 2. Detects the reflected distance: 1mm ~ 25mm Applicable 3. The working voltage: 5V 4. The output format: digital signal (0 and 1) 5. A fixed bolt hole for easy installation 6. Small PCB board size: 3.5cm x 1cm 7. Application: meter pulse data sampling, fax machines paper shredders detection, obstacle detection, black and white line detection Wiring: 1, VCC: positive power supply (5V) 2, GND: power supply is negative 3, OUT: high / low switch signal (digital signal 0 and 1) Package included: 1 x TCRT5000 Module { "id" : "Specification", "title" : [], "data" : []}10. Universal Solder Line Follower Obstacle Avoidance Tracking IR Sensor for Robots or Arduino etc.
Feature
Standard same/next day shipping from Canadaline follower sensor
tracking sensor
obstacle avoidance
for robots, vehicles, Arduino Raspberry etc. compatible