When you want to find adf4351 module, you may need to consider between many choices. Finding the best adf4351 module is not an easy task. In this post, we create a very short list about top 10 the best adf4351 module for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 adf4351 module:
Reviews
1. 35M-4.4GHz RF Signal Source PLL Phase Locked Loop Frequency Synthesizer ADF4351 Development Board, Signal Generator Module
Feature
Three-wire SPI Design: This ADF4351 signal source development board adopts with three-wire serial peripheral interface design to provide an easy operation. The three-wire SPI leads to control pin and state locking pin, which can achieve all the features, including point frequency sweep and frequency hopping, and according to the crystal frequency, the step frequency can be 0.1K to 1KEasy to Operate: This Signal Source Development Board is easy and convenient to operate. It can be controlled by the upper computer official software, so you can control it easily, and all control pins are leaded out by three-wire SPI for convenient operation, you can control it through three-wire SPI easily
Excellent Design: This RF Signal Source Development Board has well designed circuit board layout, which could provide a long-lasting good performance for you
Crystal Oscillator Design: There's a default + -50ppm 25M active crystal oscillator, with which the circuit diagram in PDF format and STM32 test program are provided
Isolation Applications: This Signal Source Frequency Synthesizer Development Board has isolation applications, the RF output level can mute, and the mute function can be controlled either by pin or software, and it also provides auxiliary RF output that can be turned off when not in use
Description
Features:
This ADF4351 signal source development board has well designed circuit board layout.It can be controlled by the upper computer official software.
All control pins are leaded out for convenient operation.
Default + -50ppm 25M active crystal oscillator. Circuit diagram in PDF format and STM32 test program are provided. Three-wire SPI lead to control pin and state locking pin, allowing all functions including point frequency sweep and frequency hopping, stepping to 1K, low frequency step can be 0.1K, according to crystal frequency.
Specifications:
Output Frequency Range: ADF4351: 35M-4.4G
Power Supply: DC002 Interface DC4-9V(typical 5V)Output Signal: 2.2-4.4G fundamental wave (sine wave),
35M-2.2G fundamental division (square wave)
Signal Output Connector: SMA female
Size: 49 x 37 x 12mm / 1.93 x 1.45 x 0.47"
File Download:
http://pan.baidu.com/s/1o8gBCJS (password: gnxy)
Package Includes:
1 x Signal Source Development Board
Note:
This board requires professional knowledge and ability, please make sure you know how to use it.
2. 1 pcs lot ADF4351 phase-locked loop signal source frequency synthesizer module
Description
Size: 61mm * 47mm * 13mm Supply voltage range: 5V USB powered Output frequency range: 35mhz to 4400mhz, fractional N-frequency synthesizer and integer N minutes Frequency synthesizer, VCO with low phase noise Programmable 1/2/4/8/16/32/64 frequency output Typical jitter: 0.3ps RMS EVM: typical, 2.1GHZ3. Compatible SCM & DIY Kits Module Board - 35M-4.4GHz PLL RF Signal Source Frequency Synthesizer ADF4351 Development Board -
Feature
Requency range: ADF4351: 35M-4.4G,Power supply: DC002 Interface DC4-9V typical 5V
Output signal: 2.2-4.4G fundamental wave (sine wave)
Compatible SCM & DIY Kits Module Board - 35M-4.4GHz PLL RF Signal Source Frequency Synthesizer ADF4351 Development Board -
Description
jslist list_layout" aria-cont="productdetails"> Specifications:Requency range: ADF4351: 35M-4.4G,
Power supply: DC002 Interface DC4-9V typical 5V
Output signal: 2.2-4.4G fundamental wave (sine wave)
Output signal interface: female
Default + -50ppm 25M import active crystal
Control: three-wire SPI control pins and lead locking pin allows all state functions, including point frequency sweep and frequency hopping, stepping to be 1K, low frequency step can be to 0.1K, the crystal. to decide.
Size(Length x Width): 48.48*36.5mm
Connector Dia.: 6.5mm
Infos link: Here!
Package Included:
1 x ADF4351 Development Board
4. ILS. - 35M-4.4GHz RF PLL Frequency Synthesizer Signal Source Development Board ADF4351
Description
Specifications:Interval request: ADF4351: 35M-4.4g,
supply: DC002 Interface typical 5V DC4-9V
Output signal: 2.2-4.4G fundamental wave (sine wave)
interface output signal : SMA female
Default + -50ppm matter 25M active crystal
control: the pins SPI three wire control - cable locking pin allow all functions state, includes the tip off frequency - frequency hopping, going to be 1K, step low frequency may be 0.1 K, crystal, to decide.
dimensions (length x width): 48.48 * 36.5mm
connector diameter: 6.5mmLink information: Play
package includes: 1 x
ADF4351 development board
5. Eyoso ADF4351 PLL module 35M-4.4GHz ADF4350 RF signal source frequency synthesizer
Description
ADF4351 PLL module 35M-4.4GHz ADF4350 RF signal source frequency synthesizer6. Bolsen ADF4351 PLL module 35M-4.4GHz ADF4350 RF signal source frequency synthesizer
Description
ADF4351 PLL module 35M-4.4GHz ADF4350 RF signal source frequency synthesizer7. Arduino Compatible SCM & DIY Kits Module Board - 35M-4.4GHz PLL RF Signal Source Frequency Synthesizer ADF4351 Development Board - 1 x ADF4351 Development Board
Feature
Specifications: Requency range: ADF4351: 35M-4.4G,Power supply: DC002 Interface DC4-9V typical 5V
Output signal: 2.2-4.4G fundamental wave (sine wave)
Output signal interface: female
Default + -50ppm 25M import active crystal
Description
Specifications: Requency range: ADF4351: 35M-4.4G,Power supply: DC002 Interface DC4-9V typical 5V
Output signal: 2.2-4.4G fundamental wave (sine wave)
Output signal interface: female
Default + -50ppm 25M import active crystal
Control: three-wire SPI control pins and lead locking pin allows all state functions, including point frequency sweep and frequency hopping, stepping to be 1K, low frequency step can be to 0.1K, the crystal. to decide.
Size(Length x Width): 48.48*36.5mm
Connector Dia.: 6.5mm
Infos link: Here!
Package Included:
1 x ADF4351 Development Board
8. 35M-4.4GHz PLL RF Signal Source Frequency Synthesizer ADF4351 Development Board - Arduino Compatible SCM & DIY Kits Module Board - 1 x ADF4351 Development Board
Feature
Arduino Compatible SCM & DIY Kits Module Board - Specifications: Requency range: ADF4351: 35M-4.4G,Power supply: DC002 Interface DC4-9V typical 5V
Output signal: 2.2-4.4G fundamental wave (sine wave)
Output signal interface: female
35M-4.4GHz PLL RF Signal Source Frequency Synthesizer ADF4351 Development Board - Arduino Compatible SCM & DIY Kits Module Board - 1 x ADF4351 Development Board
Description
35M-4.4GHz PLL RF Signal Source Frequency Synthesizer ADF4351 Development Board - Arduino Compatible SCM & DIY Kits Module Board - , , , , 1 x ADF4351 Development Board, , , , , , , , , , , , , , , ,Specifications: Requency range: ADF4351: 35M-4.4G,
Power supply: DC002 Interface DC4-9V typical 5V
Output signal: 2.2-4.4G fundamental wave (sine wave)
Output signal interface: female
Default + -50ppm 25M import active crystal
Control: three-wire SPI control pins and lead locking pin allows all state functions, including point frequency sweep and frequency hopping, stepping to be 1K, low frequency step can be to 0.1K, the crystal. to decide.
Size(Length x Width): 48.48*36.5mm
Connector Dia.: 6.5mm
Infos link: Here!
Package Included:
1 x ADF4351 Development Board
9. RF Sweep Signal Generator Module Radio Frequency Sweep Signal Source Board 35M to 4.4G + STM32 TFT Color Touch LCD
Feature
Well Designed --- ADF4531 module is designed by our senior engineers after fully referring to the official version. PCB board has beautiful appearance, reasonable layout and design, standard materialsThe output frequency range: 35M to 4.4G. Fractional N points frequency synthesizer and integer N frequency synthesizer
VCO with low phase noise; Programmable 1/2/4/8/16 divider output; with "save" functionality, able to store set parameters
2 Ways of Power Supply --- 5V power supply, or use the USB power supply directly
Color screen display, touch screen operation --- can realize dot frequency, sweep frequency .
Description
ADF4351 combined with external loop filter and external reference frequency when using, it can realize the decimal N points frequency or integer N frequency and phase lock loop frequency synthesizer. ADF4351 have an integrated voltage controlled oscillator (VCO), its fundamental wave output frequency range to 2200 MHz to 4400 MHz. In addition, the use of 1/2/4/8/16 points frequency circuit, the user can generate as low as 35 MHz / 137.5 MHz RF output frequency. For the isolation of application, the RF output stage can be mute.Mute function can be controlled by pin, can also be controlled by software. At the same time provide auxiliary RF output, and can be shut off when not in use.Specifications:
Output Frequency Range: 35M to 4.4G
The Root Mean Square (RMS) Jitter: Less Than 0.4 ps RMS (Typical)
Power Supply Voltage: 3.0 V to 3.6 V
Logical Compatibility: 1.8 V
Programmable Dual-mode Preassigned Frequency Counter: 4/5 or 8/9
Programmable Power Output: Yes
The RF Output Mute Function: Yes
Three Wire Serial Interface: Yes
Analog And Digital Lock Detection: Yes
Within The Wide Bandwidth Quickly Lock Mode: Yes
Reduce The Cycle Slip: Yes
Size: Approx. 93 x 66 x 20mm/ 3.66 x 2.59 x 0.78inch
Quantity: 110G
Note: Please do not tear off the protective film on the display screen. This touch screen is the resistive screen, and scratching can cause the touch function to fail. Circuit diagram in PDF format, underlying driver (not providing the project's source code), other information are provided.
Packing included:
1 x RF Sweep Signal Source Generator Board
1 x STM32 TFT Touch LCD
1 x USB cable
5 x Screws
4 x Standoff
10. YT Module 35M-4.4GHz PLL RF Signal Source Frequency Synthesizer ADF4351 Developmentopment Board
Feature
Package Includes: 1 x ADF4351 Developmentopment BoardDescription
Specifications:Requency range: ADF4351: 35M-4.4G,
Power supply: DC002 Interface DC4-9V typical 5V
Output signal: 2.2-4.4G fundamental wave (sine wave)
Output signal interface: SMA female
Default + -50ppm 25M import active crystal
Control: three-wire SPI control pins and lead locking pin allows all state functions, including point frequency sweep and frequency hopping, stepping to be 1K, low frequency step can be to 0.1K, the crystal. to decide.
Size(Length x Width): 48.48*36.5mm
Connector Dia.: 6.5mm
Infos link: Click Here!
Package includes:
1 x ADF4351 Developmentopment Board