Finding the best servo 15kg suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Reviews
1. LewanSoul LD-3015MG Standard Full Metal Gear Digital Servo with 17kg High Torque for RC Robot Car(Control Angle 270)
Feature
17kg large torque. 15 kgcm (208 ozin) 6.6V; 17 kgcm (236 ozin) 7.4VFull metal gear. it's better for accuracy, service life has been greatly increased
270 degree rotation. Controllable angle range from 0 to 270 degrees, Excellent linearity, precision control. Can be rotated within 360 degrees when power off
Using high-precision potentiometer with new design. Accuracy and linearity have been greatly improved! Accurate movement can satisfy the needs of making robots
Dimension: 40*20*40.5mm(1.57*0.78*1.59inch)
Description
Specifications:Weight: 60g(2.1OZ)
Dimension: 40*20*40.5mm(1.57*0.78*1.59inch)
Speed: 0.16sec/60(7.4V)
Accuracy: 0.3
Torque: 15 kgcm (208 ozin) 6.6V;17 kgcm (236 ozin) 7.4V
Working Voltage: 6-7.4V
Min Working Current: 1A
No-Load Current: 100mA
# Spline: 25T(6mm diameter)
The servo wire: 30cm(11.8inch) in length
Control Specifications:
Control Method: PWM
Pulse Width: 500~2500
Duty Ratio: 0.5ms~2.5ms
Pulse Period: 20ms
Please make sure that the duty cycle of the controller you are using conform to our specifications, otherwise the servo can't turn up to claimed degree
Wire Layout:
Red Wire: +
Black Wire: GND
White Wire: PWM/Signal
Package Contents:
1 x Digital servo
1 x 30cm servo wire
1 x Servo horn kit(as shown in the figure)
If you have any questions, please feel free to contact us at [email protected]
Note:
Note: Please be sure to avoid locked-rotor when using servo, locked-rotor means that artificially or machine obstructs the servo to rotate normally, the locked-rotor will lead to internal current increased to more than 7 times and the temperature increases, servo will burn out.
Notice for use:
1. It's recommended that use lithium polymer battery with high rate discharge(min 5C), please don't use dry battery.
2. Please use a short and thick power cord, don't use Dupont cord
2. Redcat Racing HEXFLY Servo, 15kg
Feature
Full Metal Gear Servo 15KG, SplashproofHEXFLY 9KG
Type: Analog ; Speed: .24 at 4.8v / .21 at 6.0v
Torque: 9kg*cm @ 4.8v / 10kg*cm @ 6.0v
Gear Type: Metal
Description
HX-15CS HEXFLY Full Metal Gear Servo 15KG, Splashproof. Direct replacement for HEXFLY 9KG Servos. (PZ-15328B)Type: Analog
Size: 40*20*36mm
Weight: 43g / 1.53oz
Speed: .24 @ 4.8v / .21 @ 6.0v
Torque: 9kg*cm @ 4.8v / 10kg*cm @ 6.0v
Gear Type: Metal
WARNING: These Electronics CAN NOT be submerged!
3. Fan Model FS-15W Waterproof High Torque Metal Gear Standard Digital Servo 15KG/.12S for 1/10 Scale RC Car or Robot
Feature
Torque(4.8v/6.0v/7.4V): 13.0 kg-cm (180 oz/in) / 15.0 kg-cm (208 oz/in) / 17.0 kg-cm (236 oz/in) Speed(4.8v/6.0v/7.4V): 0.17 sec/60 0.15 sec/60 0.11 sec/60Dimensions: 40 x 20.5 x 40.5 mm ( 1.57 x 0.78 x 1.59 in)
For 1/10 scale RC cars, boats, and any application where standard servos are used
Controllable angle range from 0 to 180 degrees.All metal gears ensure service life. With a new high-speed motor, greatly improve the speed
Waterproof construction keeps out the elements for worry free operation
Description
SpecificationsUsed For: 1/10 scale RC cars,
Torque(4.8V): 13.0 kg-cm (180 oz/in)
Torque(6.0V): 15.0 kg-cm (208 oz/in)
Torque(7.4V): 17.0 kg-cm (236 oz/in)
Speed: 0.17 sec/60 (4.8V) 0.15 sec/60 (6.0V) 0.11 sec/60 (7.4V)
Operating Voltage Range: 4.8 ~ 7.4 DC Volts
Bearing Type: Ball Bearing x 2
Gear Type: Copper
Temperature: -20~60
Connector Wire Length: 320mm/12.6inch
Spline: 25T(6mm diameter)
Weight: 60 g (2.12 oz)
Dimensions: 40 x 20.5 x 40.5 mm ( 1.57 x 0.78 x 1.59 in)
Control Specifications:
Limit angle: 180 10
Operating travel: 90(1000~2000 sec)
Control Method: PWM
Pulse Width Range(0~180): 500~2500 sec
Duty Ratio: 0.5ms~2.5ms
Pulse Period: 20ms
Dead band width: 4 sec
Include
1 x Fan Model FS-15W Waterproof Digital Servo
1 x Servo horn kit(as shown in the figure)
Note:
- Please be sure to avoid locked-rotor when using servo, locked-rotor means that artificially or machine obstructs the servo to rotate normally, the locked-rotor will lead to internal current increased several times and the temperature increases, servo will burn out.
4. Team Redcat SW-0231 Waterproof Servo, 15kg
Feature
Redcat Racing SW-0231 Waterproof Servo (15KG)Genuine Redcat Racing Spare Parts
Redcat Racing Part Number SA-SW0231
For troubleshooting and warranty information please contact a Redcat Racing Customer Service Specialist at 602-454-6445 or by emailing [email protected]
NOTE: Please read the User Manual before use.
Description
Redcat Racing SW-0231 Waterproof Servo (15KG), Compatible with Team Redcat TR-M8TE, Gear set with bearings.5. Redcat Racing Hexfly 15KG with Clutch Vehicle
Feature
Hex fly 15kg servo with clutchOfficial Redcat Racing Replacement parts
Redcat Racing Part #: HX-15CC
For troubleshooting and warranty information please contact a Redcat Racing Customer Service Specialist at 602-454-6445 or by emailing [email protected]
NOTE: Please read the User Manual before use.
Description
Redcat Racing Hex fly 15Kg Servo with clutch. Parts are compatible with Blackout XTE pro. Affordable, durable, quality replacement parts.6. Hobbypark HDR315M 15kg Digital High Torque Robot Servo Motor 180 Degree Metal Gear With U Mouting Case (Pack of 2)
Feature
100% Original Hobbypark HDR315M 15kg Digital High Torque Robot Servo full Metal GearStall Torque :Stall Torque:13.5kg/cm5v) ;15kg/cm(7.4v)
Operating speed: 0.14 sec/60 (5v); 0.13sec/60degree (7.4v)
Dimension: 402040.5mm
Double bearings & All metal gears
Description
Item: Original Hobbypark HDR315M 15kg Digital High Torque Robot Servo full Metal GearPart No.: HDR315M
Package Include: 2x Original Hobbypark HDR315M 15kg Digital High Torque Robot Servo full Metal Gear (Accessories included)
Features:
Net Weight: 64g (Servo only)
Dimension: 402040.5mm
Stall torque:13.5kg/cm5v); 15kg/cm(7.4v)
Operating speed: 0.14 sec/60 (5v); 0.13sec/60degree (7.4v)
Control Angle: 180 degree
Operating voltage: 5-7.4v
Working current (at no load)0.06-0.08A
Gear Type: Metal gear
Temperature range: -10- 50deg
Dead band width: 3us
servo wire length: 32cm
Reduction ratio310:1
Servo Plug: JR (Fits JR and Futaba)
Connection Pin Out:
Brown - GND;
Red-VCC (5-7.4V);
Orange-Signal
Compatibile with:RC Robot
Note:Check your specific model's manual for compatibility,or Contact us
7. Arrma AR390139 ADS-15M V2 Waterproof Servo, Red, 15 kg
Feature
Dustproof and waterproof in normal usage when mounted to a vehicle Ideal for use as a steering or throttle servo in 1/10 scale vehicles usedArrma ADS-15M Servo with Futaba style Connector, 12 (32mm) diameter 6-Point Horn, 15 (39mm) diameter 4-Point Horn, 15 (39mm) Double AR
This product is manufactured in China
Description
AR390139 ADS-15M V2 15kg Waterproof Servo Red, Dustproof and waterproof in normal usage when mounted to a vehicle Ideal for use as a steering or throttle servo in 1/10 scale vehicles used. Arrma ADS-15M Servo with Futaba style Connector, 1.2 (32mm) diameter 6-Point Horn, 1.5 (39mm) diameter 4-Point Horn, 1.5 (39mm) Double Ar. This product is manufactured in China.8. Eztronics Corp Spring RC SM-S4306R Continuous Rotation Robot Servo 15KG 360-degree for Robot
Feature
Working Voltage: 4.8V - 6VWorking current: 0.1-1.2 A
Torque: 5kg-cm/4.8V ; 6.2kg-cm/6V
Average speed: 55 rpm-6V
Rotation range: 0- 360
Description
Descriptions:
The SpringRC SM-S4306R is one of the few servos designed specifically for continuous rotation. This is a high quality servo and is very popular for robotics applications. As you can see in the pictures, the servo comes with many accessories that make it easy to get your project up and running.
JR interface,360with Robot Servo,4plastic gears+1metal gear.double ball bearing.
Specifications:
Working Voltage: 4.8V - 6V
Working current: 0.1-1.2 A
Torque: 5kg-cm/4.8V ; 6.2kg-cm/6V
Average speed: 55 rpm-6V
Rotation range: 0- 360
Working Temperature: 0~55
Servo Type: Continuous Rotation
Package size: 6 * 5 * 4cm / 2.4 * 2 * 1.6in
Package weight: 60g / 2.1oz
Package Includes:
SM-S4306R Servo x1
9. Arrma Durango ADS-15M V2 15kg Waterproof Servo Red AR390139 Typhon Kraton Nero
Feature
Items included is limited to that which is picturedPart Number(s) referenced for this listing: AR390139
Fits All: Kraton, Typhon, Tailon, Senton
Condition of Part: Pulled from New In Box Kraton
Lubricant and/or minor scratches may appear on some parts due to the disassembly process.
Description
Arrma Durango ADS-15M V2 Waterproof Servo
Specification:
- Case Red, Water-proof & dust-proof
- Bearing Dual ball bearing
- Connector Futaba style 3 pin connector
- Gears Metal
- Spline 25 Tooth
- Dimensions: 40mm x 38mm x 20mm (Excluding mounting tabs), Industry Standard size
- Wire length: 300mm
- Torque ADS-15M: 15kg/cm (208oz/inch) at 7.2V
- Speed 0.16 sec/0.14 sec 6V/7.2V
- Signal AnaloguePart # AR310446, AR310428 (Reference Only)
Part# AR390139 (Reference Only)
10. Eztronics Corp 2x Spring RC SM-S4306R Continuous Rotation Robot Servo 15KG 360-degree for Robot
Feature
Working Voltage: 4.8V - 6VWorking current: 0.1-1.2 A
Torque: 5kg-cm/4.8V ; 6.2kg-cm/6V
Rotation range: 0- 360
Average speed: 55 rpm-6V
Description
Descriptions:
The SpringRC SM-S4306R is one of the few servos designed specifically for continuous rotation. This is a high quality servo and is very popular for robotics applications. As you can see in the pictures, the servo comes with many accessories that make it easy to get your project up and running.
JR interface,360with Robot Servo,4plastic gears+1metal gear.double ball bearing.
Specifications:
Working Voltage: 4.8V - 6V
Working current: 0.1-1.2 A
Torque: 5kg-cm/4.8V ; 6.2kg-cm/6V
Average speed: 55 rpm-6V
Rotation range: 0- 360
Working Temperature: 0~55
Servo Type: Continuous Rotation
Package size: 6 * 5 * 4cm / 2.4 * 2 * 1.6in
Package weight: 60g / 2.1oz
Package Includes:
SM-S4306R Servo x2