Related posts

Feature

1. The advanced 32-bit ARM CortexM4 high-performance processors, can run NuttX RTOS real-time operating system;
2. 14 PWM / servo output; 3. Bus interface (UART, I2C, SPI, CAN);
4. The integrated backup power and backup controller fails, the primary controller fails over to the backup control is safe;
5. Provide automatic and manual modes; 6. Provide redundant power input and failover; 7. Multicolor LED lights;
8. Provide multi-tone buzzer Interface 9. Micro SD recording flight data;

Description

Specifications:

Microprocessor:
1.32 2 MB flash STM32F427 Cortex M4, with hardware floating-point processing unit
2. frequency: 168MHZ, 256K RAM
3.32 STM32F103 backup coprocessor

Sensor:
1.L3GD20 3-axis digital gyroscope 16
2.LSM303D 3-axis accelerometer 14 / Magnetometer
3.MPU6000 6-axis accelerometer / magnetometer
4.MS5611 precision barometer

Interface:
1 .5 high voltage compatible UART 1, 2 with hardware flow control
2. 2 CAN
3.Spektrum DSM / DSM2 / DSM-X satellite receiver compatible input
4.Futaba SBUS compatible inputs and outputs
5.PPM Signal Input
6.RSSI (PWM or voltage) Input
7.I2C
8.SPI
9.3.3 and 6.6VADC input
10. External MICRO USB Interface

Packing list:

Pixhawk 2.4.8 32bit ARM Flight Controllerx 1
Safety buttonx 1
Buzzer x 1
8G TF card (IO firmware has written) x1
Neo-M8N Gps Module x1
Black Gps Holder x1
Power Module x1 ( yellow and black color XT60 connector PM send at random
Minim OSD w/ shell x1 ( 2 kind of OSD cable send at random)
I2C Splitter Expand Module x1
PPM Module w/ shell x1
RGB module 1
433/915 MHZ telemetry x1 ( send by your choice)
6pin turn 6pin cable x 1
4pin turn 4pin cable x 1
3pin DuPont line x1,

Product item KKK999