Related posts

Feature

LCD12864 is an rotary encoder and a 128 x 64 dot matrix LCD display, full graphic Smart Controller contains a SD-Card reader.Further more all actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller. Print your 3D designs without PC, just with a g-code design stored on the SD card
Mega 2560 R3,with this product , you are able to use all the Arduino open source platform to create or learn interactive objects
RAMPS 1.4 is designed to fit the entire electronics needed for a RepRap in one small package for low cost
RAMPS interfaces an Arduino-compatible Mega with the powerful Arduino-compatible MEGA platform and has plenty room for expansion
A4988 is a complete microstepping motor driver with built in translator for easy operation

Description

Specification:

12864LCD:
>Using a large screen 12864LCD(3.2'), it can support 8 GB
>With a SD card base on back, put slicing file into the SD card and select the file on the LCD, then can be printing
>Product comes encoder parameter adjustment can be achieved, and the file selection print
>Plug and play on the RAMPS, but need to modify the firmware to support

Ramps 1.4:
>It is right angle coordinate robot and provisions of extruder
>Heater / fan output and 3 thermistor circuit MOSFET
>Fusion 5A extra security and component protection
>Heating bed control 11A fuse additional
>Pololu plate pin socket, so they can be easily replaced or removed for future design >I2C and SPI pins left for future expansion
>Servo type connector for connecting to a terminal block, a motor and a light emitting diode
>These connectors plated, rated current is 3A, very compact
>Option 2 motors are connected to the Z Prusa Mendel

Mega 2560 controller:
>The board is an ATmega2560 as core microcontroller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal oscillator
>With the bootloader, download the program directly via USB without having to go through other external writer
>Supply part of the optional USB power, or as an external power using the AC-to-DC adapter and battery
>Development IDE interface is based on open-source principles, allows you to free download for use in project work, school teaching, motor control, interactive works

Package List:
1xMeag 2560 R3 Control Board
1xLCD 12864 Controller
1xRamps 1.4 Controller
5xA4988 Stepper Motor Driver with Heat Sink
1X USB Cable