We spent many hours on research to finding stratocaster pickups humbucker, reading product features, product specifications for this guide. For those of you who wish to the best stratocaster pickups humbucker, you should not miss this article. stratocaster pickups humbucker coming in a variety of types but also different price range. The following is the top 5 stratocaster pickups humbucker by our suggestions:
Reviews
1. Estone Dual Hot Humbucker Rail Electric Guitar Neck Pickup For Strat Stratocaster Black
Feature
Twin "hot rail" style twin coil humbucker strat neck pickup.4 wires for coil tapping.
Two pole pieces and is fully shielded for low noise and wired for hum cancelling.
This pickup has high output power.
Description
100% Brand new and high qualityTwin "hot rail" style twin coil humbucker strat neck pickup.
4 wires for coil tapping.
Two pole pieces and is fully shielded for low noise and wired for hum cancelling.
This pickup has high output power.
the Resistance between red wire and black wire :appro 4.98 K.
the Resistance between white wire and green wire :appro 4.98 K.
The two fixing screw holes are 77mm apart.
Size:8cmX2.5cmX2cm(L X W X H)(Appx.).
Cable Length:38cm.
Color:Black.
Quantity:1 pcs.
Note:Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package includes:
1 x Guitar Pickup
2. Fender Vintage Noiseless Stratocaster Pickups Set White, 3 Pickups
Feature
[Sonic Characteristics] Single coil tone without the hum! Vintage Noiseless Strat pickups produce the brilliant clarity, definition and harmonic attributes of a vintage Strat in a noiseless package.[Construction] These pickups feature special beveled edge Alnico 5 magnets and enamel-coated magnet wire. Each Vintage Noiseless Strat pickup comes with 3 pots, a capacitor and resistor to enhance your Noiseless experience.
DC Resistance: 9.8K, Inductance: 3.0 Henries
Single coil tone without the hum! Vintage Noiseless Strat pickups produce the brilliant clarity, definition and harmonic attributes
These pickups feature special beveled edge Alnico 5 magnets and enamel-coated magnet wire.
Each Vintage Noiseless Strat pickup comes with 3 pots, a capacitor and resistor to enhance your Noiseless experience.
Description
Single coil tone without the hum! Vintage Noiseless Strat pickups produce the brilliant clarity, definition, and harmonic attributes of a vintage Strat in a noiseless package. These pickups feature special beveled edge Alnico V magnets and enamel-coated magnet wire. Pickups available in pre packaged set of 3 (with upgraded controls, caps, and resistors), or individually in white and black. Please see SKU descriptions for details.3. Musiclily Dual Hot Rail Blaster Humbucker Guitar Pickups for Fender Strat Stratocaster Squier Electric Guitar, Black
Feature
Standard Single coil size,but it is Humbucker,you can install it in a Fender Strat/Squier straightly or Tele guitar with a modification.4 Conductors,black body, chrome dual rails. The pickup has four wires so it can be splittable.
For the wiring mapping, you can find it down the page or in Mike B review and Robert Johnson "Bob" reviews and comment. Thanks them!
Quiet pickup with 10Kohm resistance high output, please see the reviews for the tone feeling.
Please install it carefully,base on reviews, the plastic part is easy to break.
Description
Thanks Bob and Mike's great reviews: Bob: * One coil starts with white and finishes with red, the other starts with green and finishes with black * the Red and Green go together and get capped off (tape, shrink wrap, etc..). (In old version is black one for green) * The Black and the cable shield go together and connect to ground. * The White is "hot" and goes to your switch, where the previous p'up connected. I've used several of these p'ups and all have been wired the same way. Yours should come out of the wrapper with black/shield twisted together and red/green twisted together. Just give them and extra shot of solder to make sure they're making good contact. Then, connect as I said above and you'll be rocking in no time. For future reference, you can figure this out pretty quickly if you have an old school analog multi-meter. A humbucker is just two single coils stuck together. So, you have start and finish of one single coil and start and finish on the other. Connect finish of one to the start of the other, and you are left with one pair of start-finish. One of those goes to ground, the other is to hot (to your switch in the strat). Of course, it matters *which* goes to ground or to the switch (it will work either way, but sounds better the *right* way). To get it really right, you need to ID positive and negative for each wire and that depends on the magnets and the winding. This guy does a decent job of showing you how to use a multi-meter to ring out pretty much any humbucker: http://www.youtube.com/watch?v=7UfxQBhqen8 Mike: Regarding wiring the pickups into the Strat, I used the following diagram from Seyour Duncan with success: http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=3stks4_1v_2t_5w4. ammoon 3pcs Dual Rail Humbucker Humbucking Pickups for Fender Stratocaster ST Strat for Gibson Les Paul Electric Guitar Part Milk & Green & Red
Feature
Standard dual rail humbucker pickup for ST, LP style & other electric guitar with a modification.With 4 wires conductor for coil tapping.
4.6k-9.2k resistance high output with no noise.
Easy to install, great tone.
3 colors(milk & green & red) in 1 set.
Description
Specifications:Material: Alloy & Plastic
Color: Milk & Green & Red
Resistance: 4.6k-9.2k
Pickup Size(Single): 8 * 2.5 * 2cm / 3.2 * 1 * 0.8in
Pickup Weight(Single): 76g / 2.7oz
Package Size: 10 * 8 * 5cm / 3.9 * 3.2 * 2in
Package Weight: 238g / 8.4oz
Package List:
3 * Guitar Pickup
6 * Spring
6 * Screw
Note:
Please mind the dimension showed in picture.
5. Electric Guitar Wiring Kit 1 Volume 1 Tone 3 Toggle Switch 500K Pots Jack 1 Set
Feature
2 Pickup Wiring Harness, 3 Way Blade Switch with black knob(Creme knob available by request), 500K Coil TapPrewired harness features two 500K Alpha quarter size pots with 18mm shafts for mounting through the body
Works great for guitars like Jackson and Strat Stratocaster
We manufacture all kinds of music instrument parts so that our price is very attractive with high quality
Description
Push Pull Tone pot is wired with a .047 cap. Wire your humbuckers to the tone pot - pull the pot up and turn your 4 wire humbuckers to single coils.Solder your pickups to the switch, run the included bridge ground wire to your trem/bridge, and you are set.
package include:
1 Pcs Guitar Wiring Harness
Please Note:
The product you are purchasing requires careful installation. Please consult a professional, if you are uncertain about the process. If you are not happy with the fit, please contact us directly and we will be happy to provide more details upon request