When you want to find router table accessories, you may need to consider between many choices. Finding the best router table accessories is not an easy task. In this post, we create a very short list about top 14 the best router table accessories for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 14 router table accessories:
Reviews
1. Woodpeckers Precision Woodworking Tools COPESLED1 Coping Sled
Feature
The new Woodpeckers Coping Sled is the router table accessory you need to make rail & style doors, tenons, lap joints, and most other end grain cutsIt is the best way to ensure your board is perpendicular to the router fence and guides smoothly across the router bit
The Woodpeckers Coping Sled uses two techniques to secure the your work piece
Traps board between adjustable top plate and fence with slotted top plate
Easily adjusts for material up to 5-1/2-inches
Two clamps move to the center of the work piece to prevent lifting
Clear guide allows the sled to track along the fence rather than the miter slot
Includes fully illustrated, detailed instructions
Description
The new Woodpeckers Coping Sled is the router table accessory you need to make rail & style doors, tenons , lap joints and most other end grain cuts. The Woodpeckers Coping Sled uses two techniques to secure the your work piece. First it traps the board between the adjustable top plate and the fence. The slotted top plate is easily adjusted for material up to 5-1/2-inches wide. Trapping the board this way prevents the router bit from spinning the board. Controlling this rotational force is the most important part of accurately shaping end grain. Second, two clamps hold the piece down to prevent lifting. However very little clamping pressure is needed because the board is trapped as explained earlier. The two clamp knobs are part of the clamp beam which is adjustable so it can easily be set to the center of the board. Two handles are used to lock the clamp beam in place. Their location is always directly above the clamping force and well away from the router bit. Another important feature is the clear guide. The primary purpose of the guide is to allow the sled to track along the fence rather than the miter slot. Includes step-by-step, fully illustrated instructions.2. Kreg PRS3400 Precision Router Table Set Up Bars, Set of 7
Feature
Set Up Bars come in a portable case with 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" & 1/2" barsThe step on the top edge of each bar acts as a gauge to test the depth of your completed cuts
Bars are made from a soft aluminum which is designed to prevent damage to your router bit or saw blade if contact is made during setup
Unique design straddles the Router Bit or saw blade to allow for more precise height adjustment
Step on the top edge of each setup bar acts as a gauge to test the depth of your completed cuts
Step on the end of each setup bar used to test the fence depth of a table saw blade or Router Bit
Made from a soft aluminum designed to prevent damage to your Router Bit or saw blade if contact is made during setup
Description
Set Up Bars Come In A Portable Case With 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" & 1/2" Bars And Can Be Used To Make Adjustments To Router Tables, Shapers And Table Saws. The Step On The Top Edge Of Each Bar Acts As A Gauge To Test The Depth Of Your Completed Cuts, While The Stop On The End Of Each Bar Is Used To Test The Fence Depth Of The Table Saw Blade Or Router Bit. Bars Are Made From A Soft Aluminum Which Is Designed To Prevent Damage To Your Router Bit Or Saw Blade If Contact Is Made During Setup.3. Bosch RA1152 Offset Wrenches for Router Bit-Changing
Feature
Offset wrench design allows easy router bit changes on routers that are installed in router tablesDrop-forged design with rounded edges provides comfort during bit changes
Sized to work with Bosch routers: including 1617, 1617EVS, MRF23EVS routers and 1617EVSPK and MRC23EVSK router kits
The 24 mm wrench can also be used with Bosch 1619EVS, 1613, 1613EVS and 1613AEVS Plunge Routers
Includes 16 mm shaft wrench and 24 mm collet wrench
Description
Offset Router Bit Wrench Set for use with Bosch routers. Eliminates the need to remove the router from a router table in order to change router bits. The rounded edges created by the forging process eliminates the pain often caused by inferior, stamped wrenches. Two wrenches are included, a 16 mm wrench for holding the router's armature shaft, and a 24 mm wrench for holding the collet chuck nut.4. POWERTEC 71009 Safety Push Block and Stick Package, 5-Piece
Feature
Essential safety protection to use router table, shaper, band saw, table saw and jointer1 long push block, 2 short push blocks, 1 safe V stick and 1 push stick; total of 5 pieces
Tough, durable plastic design for long lasting use; Rubber soles firmly grip your workpiece
Orange color ensures high visibility
Prevents kickback and protects hands and fingers from sharp cutting blades
Description
The POWERTEC 5-Piece Safety Package provides the key components to ensure the safety and protection of professional and hobby woodworkers alike. Set includes: 1 long push block, 2 short push blocks, 1 safe V stick and 1 push stick. Ergonomic handle-design offers comfortable, steady and firm grip. The rubber soles of these accessories securely hold your work pieces, as you guide them into the cutting blades. Keep your hands and fingers safe - and prevent kickbacks! - with this essential set. You'll have exactly what you need to get the job done - safely, effectively, and easily!5. GRR-RIPPER 3D Pushblock for Table Saws, Router Tables, Band Saws, and Jointers by MICROJIG
Feature
3-Directional Force for Unmatched Control of the Work pieceMoving-Blade-Guard Hand Protection
Precise 1/4" Thin Rips
Virtually Eliminates Kickback
Work with Small Stock Safely on the Table Saw, Router Table, Jointer, & Band Saw
3-Directional Force for total control of the workpiece
Work with small stock safely
Description
GRR-RIPPER 3D Pushblock a must-have for any table saw user.ESSENTIAL PROTECTION
It's essential for superior precision, control and safety on your table saw and other major woodworking machinery. Protect your hands like never before, virtually eliminate kickback with unmatched control, and guide and rip with surgical precision. EXTREME CONTROL
The powerful Green GRR-RIP gives you a commanding hold over the work piece for total control.
GRR-RIPPER has three legs to give you three-directions of control on the Keeper and Off-Cut work piece. It provides downward pressure to virtually eliminate kickback, inward pressure to keep the stock against the fence, and forward pressure to prevent burning.
UNMATCHED PRECISION
Stabilize your cut with the Built-in Balance Support to square your cut and safely handle the smallest parts of wood when cutting on the table saw or router table. Rip as accurate as a 1/4" standard without readjusting the fence.
FULLY ADJUSTABLE
The Adjustable Center Leg accommodates for a variety of different sizes and widths of material while the grip secures a virtually unlimited variety of woods, solid surfaces, aluminum or even plastic. GRR-RIPPER Handle can be angled and adjusted for your comfort and control.
TOTAL VERSATILITY
GRR-RIPPER comes with a 2-hour Advanced Techniques DVD featuring over 30 unique uses on the table saw, router table, jointer, and band saws.
The powerful hold, extreme accuracy, and versatile adjustability will help you maximize your materials and greatly improve your protection against dangerous accidents.
DONT USE A TABLE SAW WITHOUT IT.
Made in the USA. A true MICROJIG Innovation.
Watch the Action Video and Add to Your Cart Today! 100% Satisfaction Guarantee.
Work Safer. Work Smarter.
6. JESSEM Clear-Cut Precision Stock Guides, JessEm# 04215
Feature
Unique roller system holds down workpiece and pushes into fence for precision stock feed1-1/2" urethane one-way rollers set at 5 toward fence and 2-3/4" total adjustment
Includes one infeed stock guide, one outfeed stock guide and detailed instructions
1-1/2" urethane one-way rollers set at 5 toward fence and 2-3/4" total adjustment
Description
JessEm Clear-CutTM Precision Stock Guides are the ultimate hold-down on the router table. Featherboards are limited in their ability to guide material accurately against a router table fence while Clear-CutTM Stock Guides operate on the same principle as a stock feeder in that the stock is guided at a slight angle as it is fed forward. Rollers with one-way needle bearings are mounted at an angle, effectively steering your stock toward the fence. Stock is pulled tightly to the fence, and the gripping force of the rollers holds it securely in position.7. MLCS 9859 Combo T-Track and Miter T-Track for Router Tables and Woodworking Tool Tables
Feature
use your miter gauge or tenoning jig, plus T-Track accessoriesrouter table, band saw table or table saw extension
The T-Track accepts any accessory that uses a 1/4" hex head bolt, such as featherboards, stop blocks or hold downs.
The Miter track accepts a standard 3/4" x 3/8" bar or sliding T-Bar
32" Long
Description
Combo T-Track / Miter T-Track lets you use your miter gauge or tenoning jig, plus T-Track accessories on your router table, band saw table or table saw extension. The T-Track accepts any accessory that uses a 1/4 hex head bolt, such as featherboards, stop blocks or hold downs. The Miter track accepts a standard 3/4 x 3/8 bar or sliding T-Bar. 32 length may vary up to 1/8.8. Bosch RA1165 Under-Table Router Base with Above-Table Hex Key
Feature
New base for the 1617/1618 series routersAllows adjustment of bit height from above the table
Wrench access from above table for convenient depth adjustment
Base has threaded holes for mounting to router table
Wide 3-3/4 base opening allows use of larger bits
Description
Bosch RA1165 Undertable Base for 1617/18 Series Routers (replaces RA1164)Bosch Power Tools and Accessories is one of the divisions within the Robert Bosch Tool Corporation, which is one of the largest power tool and accessory manufacturers in the world. Bosch provides a complete line of corded and cordless power tools and accessories engineered to survive any jobsite and allow professionals to take control of their work.Bosch RA1165 Undertable Base for 1617/18 Series Routers (replaces RA1164) Features: Undertable Router Base with Above-Table Wrench Access Router Attachments, Medium & Large Routers Designed for router table usage Wrench access from above table for convenient depth adjustment Base has threaded holes for mounting to router table positioned in Bosch 4-hole pattern and common 3-hole pattern. Hardware included. Wide 3-3/4 Inch base opening allows use of larger bits Motor housing does not rotate during depth adjustment, eliminating potential cause of horizontal movement of bit Tool-free base change Quick clamp system allows motor to be moved with ease Two additional protective devices prevent motor from falling to floor after quick-clamp is released. Part Number RA1165 Used on Model No. 1617 / 1618 series routers and motors; RA1171, RA1180, RA1181, RA1182, RA1200 Router Tables Sales Pack Quantity 1 Screw Head Size 4-Hole Pattern: 4M, 3-Hole Pattern: 10-24 Category Routers9. E. Emerson Tool Co. C50 50-Inch All-In-One Contractor Straight Edge Clamping Tool Guide
Feature
No more C-clamping with a self-clamping straight edge to guide your power tools for truly straight cutsExtra wide rail for exceptional rigidity and low profile for obstruction free cuts
Make joiner cuts on your table saw. The length of clamping area is "50.25 inches" between the jaws.
Nylon jaws hold work piece securely and are predrilled for accessory Wide Jaws and Tall Jaws
Recessed tracks accept Contractor series Saw Plate, Router Plate and Stop Block but will not work with A, Twin or Ultra series accessories
Description
The Contractor C50 50in. All-In-One Clamp is a contractor-grade straight edge clamp used primarily as a guide for making straight cuts with circular saws and routers. It is both rigid and light, making it quick to position and lock in place. The aluminum frame is lightweight for ease of use but also designed for durability. The clamping components are of resilient Zytel nylon, which includes 9% glass content. The Contractor C50 straight edge clamp is one of the most valuable and useful tools in the workshop or work truck. Common Usage: Guide for making straight cuts w/circular saws and routers, Dimensions L x W x H (in.): 60 x 2 5/8 x 1 1/4, Includes: (1) Contractor clamp, Jaw Capacity (in.): 50, Material Type: Aluminum10. Router Bit Guard - Large Size
Feature
Mounts directly to router table fence with standard 1/4" x 20 hex head bolts. NOT INCLUDEDMeasures; 5-3/4"W x 3-1/2"H x 2"D
Vertically adjustable for the router bit height.
Allows you to see the router bit and work piece while you make your cut.
Available in two sizes - Small or Large - Each sold separately.
Description
Our router bit guards are simple in design, but are effective when it comes to safety. The guards mount directly to your router table fence with standard 1/4" x 20 hex head bolts and are vertically adjustable for the router bit height.11. Bosch Cabinet Style Router Table RA1171
Feature
Tall Aluminum Fence with Adjustable MDF Face Plates4-7/8" x 25-1/8" supports taller work pieces and outfeed can be offset for jointingRigid Aluminum Router Mounting PlateStays flat and precise for accuracy and pre-drilled for a variety of routers
Accessory slot accepts featherboard and 3/4-inch optional accessories such as miter gauge
2 Dust collection ports for standard 2-1/2-inch vacuum hoses
Dual Outlet Switch with 6-foot power cord - lock helps prevent unauthorized use
Description
Don't let the size fool you; the versatile design of the RA1171 enables woodworkers to tackle a wide variety of routing applications. With a sturdy aluminum fence that measures 4-7/8" high by 25-1/8" long, handling tall stock is not a problem, and the adjustable MDF faceplates allow for better support and smoother operation. The fence has a max opening of 3-3/16" and a max throat opening of 3-5/8". This unit comes with a rigid aluminum router mounting plate that will remain flat and true for precise, accurate cuts time after time and is predrilled for variety of routers, including Porter-Cable, DeWalt, Makita, Craftsman and, of course, Bosch.The enclosed cabinet-style design efficiently removes dust and has two dust-collection ports for removing dust and debris above and below the table. Both ports are designed to fit standard-sized 2-1/2" vacuum hoses. This Router Table measures 25-1/2" wide by 14-1/2" high by 15-7/8" deep and weighs 42 pounds.
The easy-to-use featherboards attach to the fence, or the table, and are fully adjustable to fit a variety of workpieces, while providing support and control to safely feed stock across the routing table. The miter slot fits standard 3/4" accessories or any miter gauge measuring 3/4" x 3/8" deep. Bosch also includes a dual outlet switch with a 6' power cord as standard equipment.
Includes: Bench Top Router Table, Aluminum Router Mounting Plate, 3X Mounting Plate Rings, Mounting Hardware, 2X Adjustable Featherboards, Adjustable Clear Guard, Starter Pin and Guard, and 2X Outfeed Fence Shims.
12. Big Horn 11262 2-1/2-Inch Triangular Dust Port
Feature
Create healthier work environmentUse with router and table saw fences
Fits into corners
Accepts 2-1/2-Inch hose
For best connection use hose clamp (not included)
Description
Big Horn Corporation 11262 2 1/2" Triangle Connector13. MLCS 9338 All-In-one Router Plate Kit
Feature
Everything You Need to Mount Your Router to a Table!Strong, durable phenolic plastic will hold any router
3 bit opening sizes
Easy installation
Magnetic plate hold-down
Description
3/8" thick phenolic router plate supports any router. 2 removable rings give three different bit openings: (3-7/8", 2-5/8", 1-3/16"). Note: 1-3/16" opening is designed to hold Porter Cable (R) style guide bushings. The steel starting guide pin allows routing curved work. The plate is approximately 9" x 12" with pre-drilled table mounting holes. Includes magnets and adjusting screws for securing and leveling the plate. Also includes concentric rings on bottom of plate for easy alignment when installing your router.14. Rockler 4-Piece Router Table Accessory Kit