When you want to find cp2102 10pcs, you may need to consider between many choices. Finding the best cp2102 10pcs is not an easy task. In this post, we create a very short list about top 10 the best cp2102 10pcs for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 cp2102 10pcs:
Reviews
1. Quickbuying 10PCS CP2102 USB 2.0 to TTL UART Module 6Pin Serial Converter STC Replace FT232
Feature
10PCS CP2102 USB 2.0 to TTL UART Module 6Pin Serial Converter STC Replace FT232Description
10PCS CP2102 USB 2.0 to TTL UART Module 6Pin Serial Converter STC Replace FT2322. Quickbuying 10pcs USB 2.0 to TTL UART Module Serial Converter CP2102 STC PRGMR
Feature
10pcs USB 2.0 to TTL UART Module Serial Converter CP2102 STC PRGMRDescription
10pcs USB 2.0 to TTL UART Module Serial Converter CP2102 STC PRGMR3. Quickbuying 10PCS USB to RS232 TTL CH340G Converter Module Adapter Replace Pl2303 CP2102
Feature
10PCS USB To RS232 TTL CH340G Converter Module Adapter replace Pl2303 CP2102Description
10PCS USB To RS232 TTL CH340G Converter Module Adapter replace Pl2303 CP21024. Quickbuying 10PCS New CP2102 USB 2.0 to UART TTL 5PIN Module Serial Converter Faster
Feature
10PCS NEW CP2102 USB 2.0 to UART TTL 5PIN Module Serial Converter FASTERDescription
10PCS NEW CP2102 USB 2.0 to UART TTL 5PIN Module Serial Converter FASTER5. 10PCS USB to RS232 TTL CH340G Converter Module Adapter STC Replace Pl2303 CP2102
Feature
1 Support XP Win7 Win8 Android Apple systems. 2. Support USB1.1 or USB2.0/USB3.0 for communication.3. Simulation interface, you can upgrade serial peripherals. 4. Supports common MODE contact signal.
5. Supports IRDA SIR infrared communication. 6. Provide RS232, RS485, RS422 interface.
7. Programming does not affect the target board program runs.
6. FidgetGear 10PCS USB 2.0 to TTL UART 5PIN Module Serial Converter CP2102 STC PRGMR
Description
Stable and reliable chipset CP2102
USB specification 2.0 compliant with full-speed 12Mbps.
Standard USB type A male and TTL 5pin connector. 5pins for 3.3V,TXD,RXD,GND & 5V
All handshaking and modem interface signals
Baud rates: 300 bps to 1.5 Mbps.
Byte receive buffer; 640 byte transmit buffer.
Hardware or X-On/X-Off handshaking supported.
Event character support Line break transmission.
USB suspend states supported via SUSPEND pins.
Temperature Range: -40to +85
Supports Windows 98SE, 2003, XP, Vista, Window7, Mac OSX , Linux 2.6.x and 2.4.36
main colorRed
sizeabout45*14*8mm
Package Included:
10 x USB 2.0 to TTL UART 5PIN Module Serial Converter CP2102 STC PRGMR
7. YT Module 10Pcs USB-TTL UART Serial Adapter CP2102 5V 3.3V USB-A for Arduino
Feature
Package Includes: 10 x USB-TTL UART Serial AdapterThe high-performance, optimal cost CP2102 USB to UART bridge family offers a complete plug and play interface solution.
Crystal-less operation, in-system programming memory and small body size packages reduce cost, simplify design and shorten development time.
Description
Schematic: http://img.banggood.com/file/products/20171226043316Schematic-USBTTL-CP2102.pdfPinOut Diagram: http://img.banggood.com/file/products/20171226043249PINOUT-USBTTL-CP2102.pdf
Driver: https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers
Features:
The high-performance, optimal cost CP2102 USB to UART bridge family offers a complete plug and play interface solution.
Crystal-less operation, in-system programming memory and small body size packages reduce cost, simplify design and shorten development time.
Specifications:
Speed: USB 2.0 (12 Mbps) / Up to 1024 Bytes / up to 2 Mbps / USB-A
Tolerance: 3.3V/5V
Working temperature: -40 to +85 C
Size: 15.5 x 23mm
Driver:
The CP210x USB to UART Bridge Virtual COM Port (VCP) drivers are required for device operation as a Virtual COM Port to facilitate host communication with CP210x products.
These devices can also interface to a host using the direct access driver.
The Serial Communications Guide for the CP210x, download an example above.
Package includes:
10 x USB-TTL UART Serial Adapter
8. elinke 10PCS/LOT CJMCU CP2102 USB To TTL/Serial Module UART STC Downloader For
Description
10PCS/LOT CJMCU CP2102 USB To TTL/Serial Module UART STC Downloader For9. YT Module 10Pcs Yoton CP2102 USB to TTL/Serial Module Downloader for Arduino
Feature
Original CP2102 chip to generate COM port after installing the driver.MICRO Yoton-USB connection standard input connected to a computer USB interface cable with two power 3.3V and 5V voltage output
With a resettable fuse. In the event of accidental short, can effectively protect your downloads and computer USB port
Onboard status indicator lights transceiver, properly installed rear drive status indicator lit, receiving indicator flashes when communicating with LED running lights.
Supports baud rates from 300bps ~ 1Mbps between
Description
10Pcs Yoton CP2102 USB To TTL/Serial Module UART STC Downloader For ArduinoDriver Installation Introduction:http://forum.banggood.com/forum-topic-56275.html
Descriptions:
Yoton-CP2102 its highly integrated, built-in USB2.0 full-speed function controller, USB transceiver, crystal oscillator, EEPROM and asynchronous serial data bus (UART), supports full-featured modem signal without any external USB devices. Yoton-CP2102 works with other USB-UART adapter circuit similar to the driver through the PC's USB port to a virtual COM port expansion in order to achieve the purpose.
Yoton- gesture communication module USB to TTL module 5V power output TTL level kernel Yoton-CP2102 CP2102 is a highly integrated USB-UART bridge to provide a minimum of components and PCB space to achieve a simple USB RS232 converter to solve program. Simply put, it is this: the user Yoton-CP2102 USB interface and RS232 interface will be able to convert each other.
Features:
Original CP2102 chip to generate COM port after installing the driver.
MICRO Yoton-USB connection standard input connected to a computer USB interface cable with two power 3.3V and 5V voltage output
With a resettable fuse. In the event of accidental short, can effectively protect your downloads and computer USB port
Onboard status indicator lights transceiver, properly installed rear drive status indicator lit, receiving indicator flashes when communicating with LED running lights.
Supports baud rates from 300bps ~ 1Mbps between
Communication format support: (1) data bits 5,6,7,8; (2) to support 1.5, 2 stop bits; (3) odd, even, mark, space, none parity
Supported operating systems: windows 8.1 / 7 / vista / xp / 98, Mac OS-X / OS-9, Linux
USB Block MICRO Yoton-USB interface for seat
SMD components for the regular company of welding, stable quality, beautiful appearance
With DTR trigger signal output ca
10. YT Module 10Pcs CP2102 USB to TTL Module
Feature
Package Includes: 10 x CP2102 USB To TTL Module1. onboard CP2102USB - RS232 interface conversion chip.
2. onboard power light.
3. onboard USB male head, convenient to connect the computer.
4. main pin has led chip, convenient communication with microcomputer.
Description
Descriptions:1. onboard CP2102USB - RS232 interface conversion chip.
2. onboard power light.
3. onboard USB male head, convenient to connect the computer.
4. main pin has led chip, convenient communication with microcomputer.
5. board size: 25.8 (mm) x16.6 (mm).
Package includes:
10 x CP2102 USB To TTL Module