If you looking for f30t12 led replacement then you are right place. We are searching for the best f30t12 led replacement on the market and analyze these products to provide you the best choice.
![[10 PC]G13 3FT 15W 6500K CLEAR BI-PIN 906 mm/ 35.67](https://images-na.ssl-images-amazon.com/images/I/51FL1Mk2qNL.jpg)
Reviews
1. HIKETOLIGHT T8 LED Shop Light Tube,4ft,18W (40W equivalent) 48",4000K Neutral White,Clear Cover,Works WITH or Without a Ballast Fluorescent Retrofit Replacement UL DLC Plug Play,2 Sided Connection
Feature
Save up to 50% on your energy bills when you use 18W LED tube lights as 40W or F30T12 fluorescent replacements.Plug and Play (Works with or WITHOUT a Ballast!),do NOT work with T12 ballast.
Design Lights Consortium, UL and DLC approved.This UL LISTED LED tube meets all regulatory requirements. The UL CERTIFICATION is indication of a superior quality product that has passed numerous tests before getting its approval.
LONG LASTING - HIKETOLIGHTs LED tubes have an outstanding life rating of 45,000+ hours and are composed of durable epoxy resin and aluminum alloy. These tubes can last 20+ years depending on use, eliminating the need to frequently replace your ceiling lighting.
5-YEAR WARRANTY- We are confident in our high-quality LED products, One of the highest standard on the market, Preferred by most contractors and electricians. Reduce re-lamp frequency.
Description
Instant Energy SavingsUsing HIKETOLIGHT's LED tube can reduce energy use by as much as 50% when you use 18W LED tube lights as 40W or F30T12 fluorescent replacements.Improving energy efficiency can reduce emissions that contribute to global warming, mercury contamination in lakes, acid rain, and nuclear waste.
Tired of changing out lights and wasting money?
With a lifespan of over 50000 hours, you will reduce your re-lamp frequency and save. Our lights are super BRIGHT, SAVE energy, and LOWER your electric costs.
UL,DLC qualified
The UL CERTIFICATION is indication of a superior quality product that has passed numerous tests before getting its approval.HIKETOLIGHT's tube meets all regulatory requirements.
Compatible with or without T8 ballast
Plug and Play, Works with or WITHOUT a Ballast!....Works with T8 Ballast, but NOT with T12 Ballast.Efficiency with ballast- more than 110 LM/W and Efficiency without ballast -more than 125 LM/W.Input voltage can be AC100-277V with ballast and AC100-277 without ballast.
Applications:
LED T8 Tubes have been installed in many schools, hospitals, parking lots, office buildings, malls, warehouses and hotels across Southern California.
2. Fulight Easy-Installing F25T8/CW LED Tube Light- T8 3FT 14W (30W Equivalent), Daylight 5000K, Double-End Powered, Frosted Cover, Works from 85-265VAC - Fluorescent Replacement Bulbs
Feature
Fixture Rewiring is Easy but REQUIRED: No more electronic ballast! **Installation Manual attached as the 2nd photo at the left upper corner of this product page!**Comfortable Daylight White 5000K with Color Rendering Index >80% (Works from 85-265VAC!)
Thick Aluminum Spine Design for SUPERIOR Heat Dissipation Capability: to guarantee safety and long lifetime.
GREEN ECO FRIENDLY + SIGNIFICANT ENERGY SAVING: no flickering, no UV light, no buzzing ballast, no hazardous materials + Saving ~50% electricity
Lifetime>50,000hrs; 3-Year Warranty.
Description
This is a double-end input T8 3FT LED tube light with 13W total input power to replace 25-32W energy-saving fluorescent. It is non-dimmable and works from 85-265VAC. The installation is easy, please make sure that the LED Tubes must be directly wired to your 110/120VAC house current from the two input ends on both sides without the use of a ballast or starter. ****Please read the manual and description carefully before making any purchasing. We assume that each buyer has read them and known how to wire this type LED tube lamp ! ****3. Fulight True-Color T8 LED Tube Light (Dimmable)- 3FT 14W (25W Equivalent), Daylight 4000-4500K, F25T8/CW, Double-End Powered, 110/120VAC - Full-Spectrum with 95CRI
Feature
MUST be directly wired to the 120V AC Power: Disconnect Ballast & Starter if there is any! Installation Manual is attached as the 2nd photo at the left upper corner of this product page! ***DON'T BUY UNLESS YOU UNDERSTAND THIS!***FLEXIBLE ENERGY CONTROL & TRUTH & HEALTH: Fully Dimmable + Vivid True Color (Works from 110-120VAC!)
Clean Daylight White 4000-4500K with Color Rendering Index ~95%: Brings you the most joyful lighting! Roughly replaces 25-30W fluorescent, saving ~50% electricity.
Electro-Magnetic Compatible (EMC): No radio frequencies interference + No flickering, no UV light, no buzzing ballast!
SUGGESTED DIMMERS: If your fixture has a diffusive/transparent cover, you may use a regular dimmer: Leviton IPI06-1LZ, Leviton TBL03-10E (wall-plug), Leviton 6674-P0W, Lutron DVCL-153P, Lutron MACL-153M, Lutron TG-600PH, Lutron TTCL-100H (wall-plug). If your fixture doesn't have a diffusive/transparent cover, please consider to use an electronic low-voltage dimmer: ** Lutron SELV-300P **, **Lutron DVELV-300P**. - Check the 3rd photo at the left corner to get more detailed information!
Description
Working from 110-120VAC, this product has the highest Color Rendering Index (CRI) (95%) in the LED light bulb market, providing the best lighting quality by restoring the objects color up to 95% as shown in the sunlight for your eyes. It extensively outperforms the fluorescent tubes with CRI ~75% and the conventional LED tubes with CRI only ~80% . You can read or see much clearer in an environment lighted by our product. The high-quality light helps to ease your eye lens and maintain the retina's sensitivity and ability to distinguish colors, therefore, prevents your eyes from myopia and amblyopia!! ****Please read the installation manual carefully before making any purchasing. We assume that each buyer has read it and known how to wire this type LED tube lamp ! ****4. Fulight Dimmable T8 LED Tube Light - 3FT 14W (25W Equivalent), Daylight 4000-4500K, F25T8, F30T8, F30T12/CW, Double-End Powered, Frosted Cover, Works from 110-120VAC - Fluorescent Replacement Bulbs (Installation Manual attached in the Images!!)
Feature
MUST be directly wired to the 120V AC Power: Disconnect Ballast & Starter if there is any! Installation Manual is attached as the 2nd photo at the left upper corner of this product page! ***DON'T BUY UNLESS YOU UNDERSTAND THIS!***FULLY DIMMABLE Cool White 4000-4500K with Color Rendering Index >90% (Works from 110-120VAC!)
SIGNIFICANT ENERGY SAVING: roughly replaces 25W-30W fluorescent with 1400lm output, saving ~50% electricity.
Electro-Magnetic Compatible (EMC): No radio frequencies interference + No flickering, no UV light, no buzzing ballast!
SUGGESTED DIMMERS: If your fixture has a diffusive/transparent cover, you may use a regular dimmer: Leviton IPI06-1LZ, Leviton TBL03-10E (wall-plug), Leviton 6674-P0W, Lutron DVCL-153P, Lutron MACL-153M, Lutron TG-600PH, Lutron TTCL-100H (wall-plug). If your fixture doesn't have a diffusive/transparent cover, please consider to use an electronic low-voltage dimmer: ** Lutron SELV-300P **, **Lutron DVELV-300P**. - Check the 3rd photo at the left corner to get more detailed information!
Description
This is a double-end input T8 3FT LED tube light with 14W total input power to replace 25-30W energy-saving fluorescent. It is fully dimmable and works from 110-120VAC. The installation is easy, please make sure that the LED Tubes must be directly wired to your 110VAC house current from the two input ends on both sides without the use of a ballast or starter ****Please read the manual and description carefully before making any purchasing. We assume that each buyer has read them and known how to wire this type LED tube lamp ! ****5. Fulight Dimmable & Warm T8 LED Tube Light - 3 Foot 14W (25W Equivalent), Warm White 3000-3500K, F25T8, F30T8, F30T12/WW, Double-End Powered, Clear Cover, Works from 110-120VAC - Fluorescent Replacement Bulbs (Installation Manual attached in the Images!!)
Feature
MUST be directly wired to the 120V AC Power: Disconnect Ballast & Starter if there is any! Installation Manual is attached as the 2nd photo at the left upper corner of this product page! ***DON'T BUY UNLESS YOU UNDERSTAND THIS!***FULLY DIMMABLE Warm White 3000K-3500K with Color Rendering Index >90% (Clear Cover, Works from 110-120VAC!)
SIGNIFICANT ENERGY SAVING: roughly replaces 25W-30W fluorescent with 1400lm output, saving ~50% electricity.
Electro-Magnetic Compatible (EMC): No radio frequencies interference + No flickering, no UV light, no buzzing ballast!
SUGGESTED DIMMERS: If your fixture has a diffusive/transparent cover, you may use a regular dimmer: Leviton IPI06-1LZ, Leviton TBL03-10E (wall-plug), Leviton 6674-P0W, Lutron DVCL-153P, Lutron MACL-153M, Lutron TG-600PH, Lutron TTCL-100H (wall-plug). If your fixture doesn't have a diffusive/transparent cover, please consider to use an electronic low-voltage dimmer: ** Lutron SELV-300P **, **Lutron DVELV-300P**. - Check the 3rd photo at the left corner to get more detailed information!
Description
This is a double-end input T8 3FT LED tube light with 14W total input power to replace 25-30W energy-saving fluorescent. It is fully dimmable and works from 110-120VAC. The installation is easy, please make sure that the LED Tubes must be directly wired to your 110VAC house current from the two input ends on both sides without the use of a ballast or starter ****Please read the manual and description carefully before making any purchasing. We assume that each buyer has read them and known how to wire this type LED tube lamp ! ****6. Fulight Dimmable & Warm T8 LED Tube Light - 3 Foot 14W (25W Equivalent), Warm White 3000-3500K, F25T8, F30T8, F30T12/WW, Double-End Powered, Milky Cover - 110-120VAC
Feature
MUST be directly wired to the 120V AC Power: Disconnect Ballast & Starter if there is any! Installation Manual is attached as the 2nd photo at the left upper corner of this product page! ***DON'T BUY UNLESS YOU UNDERSTAND THIS!***FULLY DIMMABLE Warm White 3000K-3500K with Color Rendering Index >90% (Milky Cover, Works from 110-120VAC!)
SIGNIFICANT ENERGY SAVING: roughly replaces 25W-30W fluorescent with 1400lm output, saving ~50% electricity.
Electro-Magnetic Compatible (EMC): No radio frequencies interference + No flickering, no UV light, no buzzing ballast!
SUGGESTED DIMMERS: If your fixture has a diffusive/transparent cover, you may use a regular dimmer: Leviton IPI06-1LZ, Leviton TBL03-10E (wall-plug), Leviton 6674-P0W, Lutron DVCL-153P, Lutron MACL-153M, Lutron TG-600PH, Lutron TTCL-100H (wall-plug). If your fixture doesn't have a diffusive/transparent cover, please consider to use an electronic low-voltage dimmer: ** Lutron SELV-300P **, **Lutron DVELV-300P**. - Check the 3rd photo at the left corner to get more detailed information!
Description
This is a double-end input T8 3FT LED tube light with 14W total input power to replace 25-30W energy-saving fluorescent. It is fully dimmable and works from 110-120VAC. The installation is easy, please make sure that the LED Tubes must be directly wired to your 110VAC house current from the two input ends on both sides without the use of a ballast or starter ****Please read the manual and description carefully before making any purchasing. We assume that each buyer has read them and known how to wire this type LED tube lamp ! ****7. [10 PC]G13 3FT 15W 6500K CLEAR BI-PIN 906 mm/ 35.67" Replacement LED Tube F30T8/F30T12.
Feature
In the basement right along the wall.In any room, above curtain to get diffused light.
Above or below the Kitchen Cabinets.
Outside the House or Garage (under the shade).
In warehouse to have high visibility and low energy bill.
Description
Note: Existing Ballast Needs to be removed or by-passed before installation or bulb will burn. For wiring instructions, please look at the pictures.8. Sylvania 23139 - F30T12/D835/RS Straight T12 Fluorescent Tube Light Bulb
Feature
Color Temperature: 3,500KAverage Lifetime: 18000 hours
Lumens (light output): 2290
CRI: 80
Description
30 watt - 36" - T12 - Medium Bi-Pin (G13) Base - Designer 3,500K - 800 Series - Rapid Start | Sylvania Fluorescent Light Bulb9. Fulight Dimmable T8 LED Tube Light - 3FT 14W (25W Equivalent), Daylght 6000K, F25T8, F30T8, F30T12/CW, Double-End Powered, Frosted Cover - 110-120VAC
Feature
MUST be directly wired to the 120V AC Power: Disconnect Ballast & Starter if there is any! Installation Manual is attached as the 2nd photo at the left upper corner of this product page! ***DON'T BUY UNLESS YOU UNDERSTAND THIS!***FULLY DIMMABLE Daylight 6000K with Color Rendering Index >90% (Works from 110-120VAC!)
SIGNIFICANT ENERGY SAVING: roughly replaces 25W-30W fluorescent with 1400lm output, saving ~50% electricity.
Electro-Magnetic Compatible (EMC): No radio frequencies interference + No flickering, no UV light, no buzzing ballast!
SUGGESTED DIMMERS: If your fixture has a diffusive/transparent cover, you may use a regular dimmer: Leviton IPI06-1LZ, Leviton TBL03-10E (wall-plug), Leviton 6674-P0W, Lutron DVCL-153P, Lutron MACL-153M, Lutron TG-600PH, Lutron TTCL-100H (wall-plug). If your fixture doesn't have a diffusive/transparent cover, please consider to use an electronic low-voltage dimmer: ** Lutron SELV-300P **, **Lutron DVELV-300P**. - Check the 3rd photo at the left corner to get more detailed information!