Finding your suitable aquarium heater 200w is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best aquarium heater 200w including detail information and customer reviews. Let’s find out which is your favorite one.
Reviews
1. Uniclife HT-2200 Submersible Aquarium Heater 200W with Thermometer and Suction Cup, 50 gallon
Feature
HT-2200 heater is suitable for 26 to 52 gallons aquariums or aquariums up to 35 inch in length, suitable for most tropical freshwater and marine aquariums. An aquarium heater is very important for your fish tank set up if you have tropical fish.EXPLOSION PROOF: 1.5 mm extra thick Quartz Glass is shatterproof and prevents electricity leakage. Due to made of glass, it may be damaged during shipment carelessly. Please Contact us for a free replacement or refund immediately. Comes with 1 year replacement for EXPLOSION PROOF WARRANTY
FULLY SUBMERSIBLE: Water-tight sealing IP68 waterproof design, Strong suction cup clamps TIGHTLY FIX the heater to the tank vertically. Measures 11.5" x 1.2" (L x D)
EASY ADJUSTMENT: Maintains at temperatures that range from 61F to 90F (16C - 32C). A good range for most fish is 76 to 80F (25- 27C). A few species need to be kept several degrees warmer, and some species require temperatures a few degrees cooler.
SIMPLE PRACTICAL THERMOMETER --Designed to be simple to read and easy to attach (just peel and stick), the paper thin 5.2" by 0.7". Using color indication, the water temperature that the thermometer reads will change from white to a blue color. The measurement range is 64F - 93F.
Description
Uniclife HT-2200 200 W Aquarium heater - Best for 26-52 gallon AquariumUnilcife heater is made of high quality EXPLOSION PROOF Quartz Glass and provides required heating for your aquarium. Featuring top view temperature control. Easy to adjust with temperature control from 61F to 90F (16C - 32C).
This double insulated heater is safe and fully submersible, and can easily be installed by attaching the suckers to the glass. The heater must be fully submerged and should be placed diagonally vertically in the aquarium, rather than horizontally.
A stick-on type thermometer enables you to check the temperature whenever you look at the aquarium.
SPECIFICATIONS:
Recommended Tank Size: 26 - 52 gallons or up to 35 inch in length
Temperatures range: 61F to 90F (16C - 32C)
Measure: 11.5" x 1.2" (L x D)
Power: 200 W
Voltage: 110~120 V 60Hz
Cable length: 5 feet
Package include:
1 x HT-2200 aquarium heater
1 x Stick-on Thermometer
3 x Suction cups
1 x Instruction Manual
2. Aqueon 100106108 Pro Adjustable Heaters, 200 Watt
Feature
Adjustable heat setting 68 to 88F, Electronic Thermostat accurate to +/- 1Shatterproof and nearly indestructible
Fully submersible; Auto Shut-Off when over-heats, resets when it cools down
LED light is always on: red when heating, green when not heating
Limited Lifetime warranty
Description
The Aqueon Pro Heaters are built with a durable, non-corrosive shell for strength and even heat distribution. They have electronic thermostats for accurate temperature settings and safety. LED power indicator light turns red when unit is heating and green when set at the selected temperature. Can be used for freshwater or saltwater fish tanks. Can be positioned horizontally or vertically (preferred method).3. CNZ Aquarium Quartz Glass Submersible Heaters, 200 W
Feature
Fully submersible quartz heater for reliable aquarium performanceSet desired aquarium temperature and on/off indicator light confirms operation
Fast heating and accurate heating temperature range is 68-93f (20-34c)
On/off indicator light allows simple, visual confirmation of heater operation
Wattage: 200-watt, heater length:12.5", tank capacity: 50gal, voltage: 110-120v 60hz
Description
High quality, break resistant quartz glass construction fully submersible simple installation available in a variety of sizes suction cups for securing to the aquarium visible temperature setting for use in fresh and saltwater. Two suction-cup clamps included. 5-1/2 ft. Cord.4. Eheim AEH3617090 200-watt Jager Heater for Aquarium, 16-Inch
Feature
Elemi Jaeger Trump Heater 15 Inch 200 WattManufactured by Elemi
Made in Germany
Description
With the EHEIM precision heater your fish receive exactly the right temperature – in any aquarium.Obvious ideas often are the best ones. For example, the aquarium heater as a rod. The heating rod is simply hung in the water and heats it. It is true that the principle is still the same as decades ago. But a lot has changed in the meantime. And today the EHEIM adjustable heater is an ultra-modern electronic thermal device with the best available technology. A jacket made from special laboratory glass increases the heating surface, serves as a heat shield and ensures optimum even heat emission. And no matter if you want to heat a 5 or a 265 gallon aquarium – you have 9 sizes to choose from.
The Jager 200 watt heater is rated for aquariums 79-106 gallons and has a 15" rod.
5. ViaAqua 200-Watt Quartz Glass Submersible Heater with Built-In Thermostat
Feature
High quality quartz glassFully-submerisble
Visible temperature setting
For use in fresh or saltwater aquariums
Description
High quality quartz glass submersible heater with a visible temperature readout6. Aqueon Preset Heater, 200W
Feature
Preset to 78 degrees, appropriate for most tropical fish.Fully submersible, shatter-resistant construction
Automatic safety shut-off avoids overheating and damage
LED indicator light displays when actively heating
1 year warranty
200 watt is recommended for 75 gallon aquariums
Description
Aqueon Preset Heaters require no adjusting! The preset temperature has been calibrated to 78, appropriate for most tropical fish. The fully submersible heaters are constructed of shatter-resistant quartz glass and features an automatic safety shut-off to avoid overheating. An LED indicator light displays red when actively heating. Can be positioned at a horizontal or vertical angle in your tank.7. Fluval E 200-Watt Electronic Heater
Feature
Dual temperature sensors provide accurate and real time water temperaturesLCD temperature display available in both Fahrenheit and Celsius; Range of 68 to 93 degrees Fahrenheit
Fast heat technology built with a safety shut-off; Integrated fish guard to protect fish and invertebrates
Equipped with a slim profile mounting bracket; Colored display alert system
Suitable for aquariums up to 65 gallons; 200 watts; 5 year warranty
Description
Fluval E Heaters
Maintaining proper temperature is one of the most important factors in aquarium care. The Fluval E Heaters continuously monitor and display aquarium water temperature, ensuring the well-being of your aquarium inhabitants.
Simply the most technologically advanced submersible aquarium heaters available today, the Fluval E Series features VueTech technology. Its LCD display delivers peace of mind by continuously showing real time water temperatures. During normal operation the temperature display changes color if the aquarium water temperature varies from the pre-set temperature. Should external heat sources or other equipment cause the aquarium water temperature to rise or fall excessively the colored screen will flash, indicating a potential risk.
The Fluval E series heater is available in four sizes:
50 Watts: Suitable for aquariums up to 15 gallons
100 Watts: Suitable for aquariums up to 30 gallons
200 Watts: Suitable for aquariums up to 65 gallons
300 Watts: Suitable for aquariums up to 100 gallons
A few key facts to know about your Fluval E Heater:
Thermal Sensor:
The temperature sensing technology is as precise as an external probe!
The internal Thermal Sensor samples the actual water temperature directly through the glass of the heater tube rather than the air temperature within the tube, as is the case with standard bi-metallic strip thermostats. Since the Thermal Sensor actually reads the true water temperature, it is more accurate and reliable than conventional bi-metallic heaters.
Reliable and Precise Electronic Components:
Advanced Electronic Circuitry, no moving parts to wear out!
Since the FLUVAL E heater has no bi-metallic points, there are no moving parts to arc, corrode or wear. The thermostatic control of the heater is separated from the water thermal sensor, different from conventional bi-metallic heaters, where the sensor is directly built into the thermostat. It is therefore less affected by extraneous factors.
Maintaining proper temperature is one of the most important factors in aquarium care. The Fluval E Heaters continuously monitor and display aquarium water temperature, ensuring the well-being of your aquarium inhabitants.
Simply the most technologically advanced submersible aquarium heaters available today, the Fluval E Series features VueTech technology. Its LCD display delivers peace of mind by continuously showing real time water temperatures. During normal operation the temperature display changes color if the aquarium water temperature varies from the pre-set temperature. Should external heat sources or other equipment cause the aquarium water temperature to rise or fall excessively the colored screen will flash, indicating a potential risk.
Product Features
- VueTech Technology for precision and safety- During normal operation the temperature readout will change color if the aquarium water varies +/-2 degrees F or more from the pre-set temperature. Should any external heat sources or other equipment, such as chillers, cause the aquarium water temperature to rise or fall beyond 5.5 F, the colored screen will flash, indicating a potential risk. The ability to measure temperature in Celsius is also an option.
Precise temperature setting- With the easy to use adjustment lever, the temperature can be precisely set in 0.5 increments.
Advanced safety- The integrated fish guard offers advanced protection. Fish and invertebrates cannot come into direct contact with the heater core. The glass sleeve is also protected against shocks from large fish species.
Heater bracket- Built with a secure slim profile mounting bracket. The heater can be adjusted or removed without removing the mounting bracket. The great asset of the mounting bracket is its ability for you to mount the heater at varied angles, so you can view the front screen in any direction you wish. For those with a marine aquarium and sump, you can also attach the Fluval E heater there.
Digital micro-processor- Advanced micro-processor technology with dual temperature sensors provide accurate and real time water temperature readings.
The Fluval E series heater is available in four sizes:
50 Watts: Suitable for aquariums up to 15 gallons
100 Watts: Suitable for aquariums up to 30 gallons
200 Watts: Suitable for aquariums up to 65 gallons
300 Watts: Suitable for aquariums up to 100 gallons
A few key facts to know about your Fluval E Heater:
The temperature sensing technology is as precise as an external probe!
The internal Thermal Sensor samples the actual water temperature directly through the glass of the heater tube rather than the air temperature within the tube, as is the case with standard bi-metallic strip thermostats. Since the Thermal Sensor actually reads the true water temperature, it is more accurate and reliable than conventional bi-metallic heaters.
Advanced Electronic Circuitry, no moving parts to wear out!
Since the FLUVAL E heater has no bi-metallic points, there are no moving parts to arc, corrode or wear. The thermostatic control of the heater is separated from the water thermal sensor, different from conventional bi-metallic heaters, where the sensor is directly built into the thermostat. It is therefore less affected by extraneous factors.
Four Sizes of the Fluval E Heater
Simple Installation Key Facts
-To ensure even and thorough distribution of warmed water and to provide an accurate temperature readings, the heater must be placed in close proximity to a source of water movement. Specifically, it should be placed at the rear of the aquarium, close to a filter or pumps water output. Water must at all times cover the heater at least up to the minimum water level indicated. Always maintain the water level in the aquarium to compensate for water loss due to evaporation. Note: A unique heater feature is its Low-Flow Indicator. If you see LF on your heater screen, this simply means that you need to place the heater in an area with more water circulation.(Refer to Instruction Manual for more information)
1. Position the heater in the aquarium (vertically or horizontally) and press suction cups firmly against glass, to adhere to the aquarium wall. If rear glass mounting is not possible, use the side glass mounting adapter.
2. Allow heater to acclimatize in the aquarium water temperature for 20 minutes before plugging it into the electrical outlet.
3. After 20 minutes, plug in the heater and set the degree scale if necessary.
4. At each Power-on, the E Heater goes through an initial self-test procedure during which it carries out a self-diagnosis to check internal circuitry and sensors operation, followed by a period to verify the surrounding conditions.
WARNING: The heater must never be operated outside of the aquarium. If the water level falls below the minimum water level MIN, the thermostat can no longer "read the water temperature and therefore can no longer control the heating correctly. If it has to be taken out of the water or when transferring or changing the water, disconnect the heater from the power source and wait for at least 30 minutes to allow it to cool down.
Warranty Information:
Fluval E Series Heaters are guaranteed against defects in material or workmanship under normal aquarium usage and service for 5 years. We offer a 5 year guarantee on all non-replaceable parts which means that the heater will be repaired or replaced at the manufacturer's discretion, free of charge, when the complete heater is returned with proof of purchase and postage paid. This warranty does not apply to any heater that has been subjected to misuse, negligence, or tampering.
8. Odyssea Aquarium Heater Submersible (200W)
Feature
Fully SubmersibleLength: 11.00"
Wattage: 200W
Up to 50G
For freshwater or saltwater
Description
A submersible heater is an intricate part of every aquarium setup. Temperature fluctuations may cause stress from your fish and coral. A minimum of 3-5 watts per gallon is recommended in keeping your aquarium at optimal temperature level. The use of multiple heaters in larger aquariums can allow even heat distribution.9. Aqueon Adjustable Aquarium Heaters 200-watt, Glass
Feature
Shatter-Resistant constructionAdjustable heat setting 68 to 88F, accurate to +/- 1
Automatic safety shut off and overheat protection
LED light turns on when aquarium water is being heated
Depending on ambient temperature, 200 watt is recommended for 55 to 75 gallon aquariums
For fresh or saltwater aquariums
Description
Aqueon Submersible Aquarium Heaters are made from thermal shatter-resistant quartz glass and were designed to absorb impacts, making them extremely durable. A power indicator light comes on when unit is heating. UL approved, the heater is also programmed to turn itself off when not properly submersed to avoid overheating and damage.10. Fluval M 200-Watt Submersible Heater
Feature
Built in reflective technology mirrors the surrounding colors, making the heater blend into your aquarium environmentShock resistant Borosilicate glass; High density ceramic heat sick
Slim profile tube for easy placement; Easy to install
Exceptional performance and unsurpassed reliability
Suitable for aquariums up to 65 gallons; 200 watts; 3 year warranty
Description
The Fluval M Submersible Aquarium Heaters quality manufacturing utilizes superior components and construction. The Fluval M 200 Watts Electronic Heater is ideal for use in aquariums up to 65 gallons and has a temperature range of 66-86 degrees Fahrenheit. This sleek, compact heater can be trusted for exceptional performance and unsurpassed reliability. Unique only to the Fluval "M" series the reflective technology equipped in the Fluval M Submersible Aquarium Heater helps maintain the aquariums' natural look as the heater reflects the colors of the surroundings.The heater is fully submersible and safe to operate fully submersible.11. Penn Plax Aquarium Heater Fully Submersible Within 1 Degree of Accuracy 200 Watt Heats Up to 55 Gallon Tank
Feature
Aquarium heater sets and maintains the temperature in your tank within 1 degree accuracy.Features both Fahrenheit and Celsius temperature with easy to read gage.
Heater is fully submersible and can be placed horizontally or vertically in your tank.
Has a preset temperature to 76 degrees Fahrenheit but is also easily programmed.
Heater is safe to use on larger fish tanks and aquariums up to 55 gallons in size.
Description
The Penn-Plax Cascade Heat Aquarium Heater accurately maintains the desired temperature in your tank within 1 degree of accuracy. This heater can be manually set to any temperature however, comes preset to 76 degrees making them ready to use for most aquatic environments. Just plug it in and this aquarium heater will safely and efficiently bring the temperature of the water to your set level. Fully submersible, this heater can be placed horizontally or vertically in your fish tank and will automatically maintain the desired temperature level. Made with superior insulation, this aquarium heater provides excellent heat distribution over the entire element. The heavy duty shock-resistant glass gives this aquarium heater a long life and makes them safe for your aquatic pets. Aquarium heater comes with two suction cups for easy and secure placement in your tank. Heater measures 10 inches long by 1.5 inches wide by 3 inches deep and offers 200 watts of power. Safe to use for both freshwater and saltwater fish tanks.12. Cobalt Aquatics Neo-Therm Heater, 200 watt
Feature
Cobalt Neo-Therm 200wModern super flat design
Easy to set "one touch" system
Description
Cobalt Aquatics Neo-Therm Heaters are electronically controlled and fully submersible. Easy to set "one touch" system. Set temperature range up to 96F. Thermal protection circuitry. 3 yrs. warranty. Made in Europe. For up to 55 gallon Aquariums.13. Marineland Precision Heater for Saltwater or Freshwater Aquariums
Feature
This 200 watt heater is for aquariums up to 55 gallons. Adjustable temperature dial allows you to set the temperature 1 degree with every click.Thermal Switch automatically turns off as temperature rises above an internal preset and turns back on once it cools down.
The advanced heating element contains a mica core surrounded by a mesh heating element for superior heat transfer with enhanced durability
Advanced mounting bracket securely attaches to glass and provides 3 window positions to view the temperature display
Easy to view sliding scale tells the exact temperature setting. Top dial view shows the setting from an additional location.
Description
Get precise control of your aquarium temperature with the Precision Submersible Heater. This Heater combines an adjustable temperature dial, a high visibility temperature display and an advanced heating element to keep your aquarium water at the optimal temperature for your freshwater or saltwater fish. The Precision heater also includes a thermal switch which will turn off once it rises above an internal pre-set temperature, and turns back on once it cools down, making your aquarium safer for you and your fish. This 200 watt heater is designed for aquariums up to 55 gallons.14. 200 Watts(tank Size: 40 to 66 Gallon) Adjustable Aquarium Heater Anti-explosion Submersible Fish Tank Water/ Temperature Range 18~33'c (65f and 93f.)
Feature
Fully submersible heaters work in any position (horizontal or vertical) to provide optimum aquarium water temperature. Easy to attach on aquarium tank wall with 2 suction cupsTemperature range: 18~33'C (65~93'F)
Automatic shut off when the temperature is reached
Safe and reliable in both fresh and salt water aquariums!
Material: Plastic+Shatterproof glass
Description
Recommended tank size: 60 to 100 gallon, Power: 200 W. Voltage: 110-120V 60Hz, DIMENSIONS: Length: 12.5 inch Diameter: 0.85 inch Length of power cord: 2.9 feet15. Hygger Submersible Quartz Glass Aquarium Heater Fish Tank Water Heater with Protective Sleeve (200w)
Feature
Fully Submersible Aquarium Heater: 50-500W 110V Strong Quartz Glass Aquarium Fish Tank Heater, Suitable for aquariums range from 6 to 135 gallons . Includes 170cm cable for easy use.Temperature Scale --- Compact underwater fish tank heater can adjust temperature between 61F~89F (16C~32C). Maintain constant and stable temperatures for your aquatic creatures.
Double waterproof---Plastic and black protective container for Scald-prevention and anti punching.
Strengthen protection--- Explosion-proof,Shatterproof ,Shield-proof Design---High quality Quartz Glass material aquarium heater is shatter resistant & more durable than conventional glass heaters.
Precise temperature Control --- Set and adjust the desired temperature with the use of the Temperature Controller on the top. This allows accurate thermal control via the easy set thermostat for precise.
Description
Features:1.Great for both Fresh Water and Marine Water aquariums, aquaculture, terrariums & hydroponic systems.
2.Safe and durable quartz tube.
3.Accurate temperature control and double protection--waterproof and protect sleeve.
Specification:
Voltage: 110V
Frequency: 60HZ
Adjustable temperature: 61F~89F (16C~32C)
Power: 50w 100w 200w 300w 500w
Length: 9.8in 11in 12.5in 14in 15in
Suitable fish tank: 6-15gal(50w) 13-30gal(100w) 26-50gal(200w) 40-80gal(300w) 65-135gal(500w)
Caution:
1.Do not power on the heater before you put it in the water, as there is the chance to be get burns.
2.If you want to move the heater or change the aquarium water, you need to power off the heater first and wait until the temperature drops to normal temperature.
3.It is suggested that the water level should not be lower than the hard rubber head of the heater.
4.The power cable cannot be repaired or replaced, the entire heater need to be replaced when it gets damaged.
5.This product is not available to children or those without independent working abilities.