Finding your suitable ammo can lockable is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best ammo can lockable including detail information and customer reviews. Let’s find out which is your favorite one.
Reviews
1. Ammo Box Can Lock Hardware Kit .50 Cal, Fat 50,l 30 Cal, 20 mm, 40 mm (1 Count)
Feature
Ammo Can and lock in picture not includedWorks on 50 Cal,Fat 50, 30 Cal, 20 mm, 40 mm ammo cans
Will work with medium size locks as large as 1/4" lock shackle
Kit includes: The Stainless Steel stud, One large washer,
One small washer, One neoprene washer , One Grade 8 nylon locknut, and instructions.
Description
Captain Jon's Green Can Ammo Locking Hardware. Second Generation Now Stainless Steel and Easier to install. Still the Real Deal. Still High Quality. And still the Best and Easiest way out there to "Make your ammo can - Lockable and Safe. " One Piece 1/2" Solid Stainless Steel Stud and 5/16" Threads (Made in the USA) (PatPending) No thread locker compound needed. Ammo Can Waterproofing stays intact. (Thanks Bob Whitehead) The padlock stud is now a one piece design (post and thread together). Made from Solid (1/2") machined STAINLESS 303 STEEL. Made right here in the good old US of A. (Could of done it cheaper overseas but why?. The stud is secured with a nylon locknut that is Grade 8 Steel (zinc plated) thus eliminating the need for any thread locking compound. The watertight integrity of the can stays intact because we now include a Neoprene Washer that goes on the inside (or outside) . The large and small washers included are all steel and zinc plated for rust protection. The padlock stud will take up to a 1/4" lock shackle. Overkill, but once again why scrimp when security is your goal? Installation involves drilling one 11/32"or 5/16" hole, put on the neoprene washer, then the small metal washer, then the locknut and you are Done. Will work on all Ammo can lids. Slotted lids ( slotted lids require two ), Big hole lids, and Small hole lids. For the small hole lids some minor fitting may be needed. Very Minor. The stud is now a true 1/2" so any filing will be very minor as the lid hole is a 1/2" too. If you have a slotted lid or a large hole lid then NO filing/fitting will be needed. Buy these and you will not regret it. Remember - when you mean it , Green it. (tm) This product has a 100% guarantee. If for any reason it doesn't meet your expectations, return it for a full refund.2. MTM 100 Round 12 Gauge Shotshell Dry Box
Feature
SD-100-12-09 shot shell dry box offers O-ring sealed protectionFor 12 gauge shells up to 3 1/2 inches
Handle folds flat for stackable storage; large latch for easy opening; lockable
Holds up to 100 shot shells and has two removable trays; The lid has an o-ring design for water resistance and is removable to take up less space
Made in USA
Description
Popular with waterfowl hunters during the hunting season and a dry box to use in the off season, the Shotshell Dry Box holds up to 100 shotshells and has two removable trays. The lid has an O-Ring design for water resistant sealing for those wet days and is removable for less space used in the hunting blind. It has a generously proportioned fold down handle and large latch for easy opening and can be locked.3. Case Club New .50 Cal Ammo Can with Pre-Installed Locking Hardware
Feature
Includes pre-installed stainless steel locking hardware for your padlocksDoes NOT come with any padlocks, the padlocks in the images are for display purposes only
Padlock hole: 0.25" dia, OD: 12"x6"x7.5" plus 0.5" locking hardware, ID: 11"x5.625"x6.875"
O-ring seal on lid and locking hardware for watertight seal
Buy with Case Club's Ammo Can Foam for a legal, secure, convenient, longlasting, and inexpensive way to store your firearms!
Description
Brand new 50 Cal ammo can with built in locking hardware. Simple design & excellent quality. Our ammo cans are sold brand new at competitive pricing. These are not refurbished cans. They meet all military specifications. Add a padlock and get a dirt-cheap, solid steel locking container. Check out our premade foam inserts that fit into .50 cal cans as well!4. Plano 131250 1312 Ammo Box
Feature
Dimensions: L=11.63in. x W=7.13in. x H=5.13in.Brass Bailed Latch and Heavy Duty Handle
Water Resistant O-Ring Seal
Designed to fit a .50 caliber bullet
Lockable
Description
Plano 131200 Ammo Can Water-resistant o-ring seal to keep ammo dry and protected Heavy-duty handle5. Ammo Can Plastic Lockable
Feature
Water resistant tongue-and groove lidHolds 6-8 boxes of standard ammo
Corrosion resistant bail latch
Pre-drilled for padlock (lock sold separately)
Heavy gauge polypropylene construction with reinforced lid
Description
This rugged field box protects ammo, camera equipment, personal electronics and more. The ammo box is constructed from heavy gauge polypropylene for dent-proof, rust-proof storage. The reinforced lid resists moisture, latches securely and can be locked shut for safety.6. Ammo Box Can Lock Hardware Kit .50 Cal, Fat 50, 30 Cal, 20 mm, 40 mm (10 Count)
Feature
Ammo Can and lock in picture not includedWorks on 50 Cal,Fat 50, 30 Cal, 20 mm, 40 mm ammo cans
Will work with medium size locks as large as 1/4" lock shackle
Kit includes: The Stainless Steel stud, One large washer,
One small washer, One neoprene washer , One Grade 8 nylon locknut, and instructions.
Description
Captain Jon's Green Can Ammo Locking Hardware. Second Generation Now Stainless Steel and Easier to install. Still the Real Deal. Still High Quality. And still the Best and Easiest way out there to "Make your ammo can - Lockable and Safe. " One Piece 1/2" Solid Stainless Steel Stud and 5/16" Threads (Made in the USA) (PatPending) No thread locker compound needed. Ammo Can Waterproofing stays intact. (Thanks Bob Whitehead) The padlock stud is now a one piece design (post and thread together). Made from Solid (1/2") machined STAINLESS 303 STEEL. Made right here in the good old US of A. (Could of done it cheaper overseas but why?. The stud is secured with a nylon locknut that is Grade 8 Steel (zinc plated) thus eliminating the need for any thread locking compound. The watertight integrity of the can stays intact because we now include a Neoprene Washer that goes on the inside (or outside) . The large and small washers included are all steel and zinc plated for rust protection. The padlock stud will take up to a 1/4" lock shackle. Overkill, but once again why scrimp when security is your goal? Installation involves drilling one 11/32"or 5/16" hole, put on the neoprene washer, then the small metal washer, then the locknut and you are Done. Will work on all Ammo can lids. Slotted lids ( slotted lids require two ), Big hole lids, and Small hole lids. For the small hole lids some minor fitting may be needed. Very Minor. The stud is now a true 1/2" so any filing will be very minor as the lid hole is a 1/2" too. If you have a slotted lid or a large hole lid then NO filing/fitting will be needed. Buy these and you will not regret it. Remember - when you mean it , Green it. (tm) This product has a 100% guarantee. If for any reason it doesn't meet your expectations, return it for a full refund.7. Ammo Can Man, LLC New 50 Cal Lockable ammo can with Master Lock and lock mechanism installed (Single ammo Can)
Feature
Lock adapter kit is pre-installed on each ammo canIncludes 1 140Q MasterLock with 2 matching keys
Cans are water resistant and has a rubber seal on lid
Store and Secure your ammo or personal belongings
Manufactured by Ammo Can Man