Finding your suitable simcom gsm module is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best simcom gsm module including detail information and customer reviews. Let’s find out which is your favorite one.
Reviews
1. SODIAL SIMCOM SIM900 GSM GPRS Quad-Band Modules 2G Development Shield Board for Arduino UNO R3 Mega with antenna and Nano Sim Adapter
Feature
Embedded TCP/UDP stack - allows you to upload data to a web server | RTC supported| Selectable serial port | Speaker and Headphone jacNote: This is new version (version 64M), SMS MMS support:multimedia message and Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal)
The shield allows you to achieve SMS, MMS, GPRS and Audio via UART by sending AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands). The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module(They are all 2V8 logic) present on-board.
Application: M2M (Machine 2 Machine) Applications.Remote control of appliances.Remote Weather station or a Wireless Sensor Network.Vehicle Tracking System with a GPS module.Good to learn GSM/GPRS mobile phone development, remote control equipment development, wireless meter reading, smart home appliances, ultra long distance control, etc..
Cautions: Make sure your SIM card is unlocked. It is without an insulating enclosure. Please observe ESD precautions specially in dry (low humidity) weather. The factory default setting for the GPRS Shield UART is 19200 bps 8-N-1. (Can be changed using AT commands). Computer debugging USB--TTL : Powered by: 5V-26V, recommended 2A 5V power supply.
Description
* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings.Our products will enhance your experience to unparalleled inspiration.SODIAL(R) SIMCOM SIM900 GSM GPRS Quad-Band Modules 2G Development Shield Board for Arduino UNO R3 Mega with antenna and Nano Sim Adapter
SIM900 Shield GPRS expansion board is 100% compatible with all standard Arduino development board.
material:plastic
color:blue
Quad-Band 850/900/1800/1900 MHz
GPRS multi-slot class 10/8
GPRS mobile station class B
Compliant to GSM phase 2/2+
Class 4 (2 W @ 850 / 900 MHz)
Class 1 (1 W @ 1800 / 1900MHz)
Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced
Commands: SIMCOM AT Commands.
Power select - select the power supply for GPRS shield(external power or 5v of arduino)
Power jack - connected to external 4.8~5VDC power supply
Antenna interface - connected to external antenna
Serial port select - select either software serial port or hardware serial port to be connected to GPRS Shield
Hardware Serial - D0/D1 of Arduino
Software serial - D7/D8 of Arduino
Status LED - tell whether the power of SIM900 is on
Net light - tell the status about SIM900 linking to the net
UART of SIM900 - UART pins breakout of SIM900
Microphone - to answer the phone call
Speaker - to answer the phone call
GPIO,PWM and ADC of SIM900 - GPIO,PWM and ADC pins breakout of SIM900
Power key - power up and down for SIM900
Low power consumption - 1.5mA(sleep mode)
Industrial Temperature Range - -40 to 5 Celsius +8
Packing list:
1x SIM900
1x GSM antenna
1 set Nano Sim Adapter kits
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
2. SIMCOM SIM900 Quad-band GSM GPRS Shield Development Board for Arduino
Feature
The GPRS Shield is based on SIM900 module from SIMCOM and compatible with Arduino and its clones.The GPRS Shield provides you a way to communicate using the GSM cell phone network.
The shield allows you to achieve SMS, MMS, GPRS and Audio via UART by sending AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands).
The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module(They are all 2V8 logic) present onboard.
Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world.
Description
Description:The GPRS Shield is based on SIM900 module from SIMCOM and compatible with Arduino and its clones. The GPRS Shield provides you a way to communicate using the GSM cell phone network. The shield allows you to achieve SMS, MMS, GPRS and Audio via UART by sending AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands). The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module(They are all 2V8 logic) present onboard.
Feature:
1. Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world.
2. GPRS multi-slot class 10/8 .
3. GPRS mobile station class B.
4. Compliant to GSM phase 2/2+ .
5. Class 4 (2 W (AT) 850 / 900 MHz) .
6. Class 1 (1 W (AT) 1800 / 1900MHz) .
7. Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands.
8. Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal).
9. Embedded TCP/UDP stack - allows you to upload data to a web server.
10. RTC supported.
11. Selectable serial port.
12. Speaker and Headphone jacks.
13. Low power consumption -1.5mA(sleep mode) .
14. Industrial Temperature Range - -40C to +85 C
3. Aoile SIM900 850/900/1800/1900 MHz GPRS/GSM Development Board Module Kit Arduino
Feature
-- The GPRS Shield is based on SIM900 module from SIMCOM and compatible with Arduino and its clones.-- The GPRS Shield provides you a way to communicate using the GSM cell phone network.
-- The shield allows you to achieve SMS, MMS, GPRS and Audio via UART by sending AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands).
-- The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module(They are all 2V8 logic) present onboard.
Description
Description:
Product categories: Development Board Module Kit
Features: four frequency 850/900/1800/1900 MHz - suitable for all countries of the world's GSM network, GPRS multi slot 10/8, GPRS mobile station B class, conforming to GSM phase 2/2 +, 4 level (2 W @ 850/900 MHz), 1 (1 @ 1800 / 1800), controlled by the command
Standard commands: GSM 7.07 and 7.05
Enhancement command: SIMCOM AT command, short message service - so you can send a small amount of data through the network, (ASCII or primitive sixteen), embedded TCP / UDP stack - allowing you to upload data to Web server, RTC support, optional serial port, speaker and headset jack, low power - 1.5mA (sleep mode), work The temperature range of the industry is --40 C to + 85 degree C
Package including:
1 x Development Board Module Kit
1 x box packaging
The colors deviation might differ due to different monitor settings, please kindly understand.
Please tell us first when you have any problem, we will give you the best service and solve the problem ASAP. Thank you so much.
4. Sim808 Gps/Gprs/Gsm Shield(Simcom Sim808 Module)
Feature
SIM808 GPS/GPRS/GSM is an integrated quad-band GSM/GPRS and GPS navigation technology Arduino expansion shields.A credit card size only, according to the standard Arduino pin packaging, compatible with Arduino UNO, Leonardo, Mega and other mainboard.
Compared to the previous generation SIM908, SIM808 made some improvement on performance and stability. In addition to the normal SMS and phone functions, the shield also supports MMS, DTMF, FTP and other functions.
You can achieve the data acquisition, wireless data transceiver, IoT application and GPS orientating.
The should integrates onboard microphone and headphone jack, saving your cost and making your project easily.
Description
SIM808 GPS/GPRS/GSM is an integrated quad-band GSM/GPRS and GPS navigation technology Arduino expansion shields. A credit card size only, according to the standard Arduino pin packaging, compatible with Arduino UNO, Leonardo, Mega and other mainboard.Compared to the previous generation SIM908, SIM808 made some improvement on performance and stability. In addition to the normal SMS and phone functions, the shield also supports MMS, DTMF, FTP and other functions. You can achieve the data acquisition, wireless data transceiver, IoT application and GPS orientating. The should integrates onboard microphone and headphone jack, saving your cost and making your project easily. it can also directly connect to the GSM and GPS antenna by an external antenna connector.SIM808 GPS/GPRS/GSM Shield V1.0 uses the latest version of Simcom SIM808 module, compared with the early SIM808 module available in the market, the newer module has better stability.?5. SIM900 GSM / GPRS Shield module & UNO R3 Board
Feature
1. Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world.2. GPRS multi-slot class 10/8
3. Class 4 (2 W (AT) 850 / 900 MHz)
Description
Description: The GPRS Shield is based on SIM900 module from SIMCOM and compatible with Arduino and its clones. The GPRS Shield provides you a way to communicate using the GSM cell phone network. The shield allows you to achieve SMS, MMS, GPRS and Audio via UART by sending AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands). The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module(They are all 2V8 logic) present onboard.Package List
UNO ATmega328P Microcontroller Board
sim 900 board
usb cable
6. KEYESTUDIO SIM5320E 3G Module/GSM GPRS SMS Development Board with GPS Antennas and Adapter for Arduino
Feature
keyestudio SIM5320E 3G module is a mobile phone module, which can be used for GPRS data transmission, GPS positioning, supporting both Mobile and UnicomA group of TTL-level serial port, compatible with 5V/3.3V microcontroller; with a Umini USB interface, can be directly connected to the computer debugging
A group of IIC interfaces, a group of interface can control the module's opening and closing: Voice Mike Interface is led out, the interface is a 2.54 * 4P single row pin form
Power Supply: DC 5V 2A or above; With FC, CE and SGS certification, we guarantee it is excellent and safe
Scan the Qr code on the picture to get the wiki tutorial about COM Port Connection, GPS Testing, Calling Function, SMS Function, TCP/IP Function, Other commonly used AT command, etc
Description
Interface ExplanationPower Supply: DC 5V 2A or above. Communication Interface: a group of TTL-level serial port, compatible with 5V/3.3V microcontroller; with a USB interface, can be directly connected to the computer debugging.
GPS Antenna Interface: a group of IPXmini antenna interface, the default connecting to active GPS antenna.
GMS Antenna Interface: a group of IPXmini antenna interface, the default providing PCB antenna.
SIM Card Interface: drawer type
USB Interface: mini USB interface
Voice Mike Interface: Lead out, the interface is a 2.54 * 4P single row pin form.
Other Interfaces: a group of IIC interfaces, a group of interface can control the module's opening and closing (the module default self-starting).
Indicator LEDs: one LED is used to indicate the working status of the module; another 0603 LED is used to indicate the network status.
Preparation
1Insert the SIM card
2J2: power supply DC 5V 2A
33G ANT interface: connecting 3G antenna
4GPS ANT interface: connecting GPS antenna
5Connecting to MICRO USB interface.
Done drive installation, it will build communication between USB and system,5 ports will be mapped on the system as follows:
USB Modem COM portused to dial-up networking.
AT command COM portused to process AT command.
NMEA COM portused for GPS information output.
Diagnostics COM portused for debugging, grab the log information of module.
Ethernet Adapternot supporting.
List:
1 x keyestudio SIM5320E 3G Module
1 x 3G PCB antenna
1 x GPS antenna
1 x GPS antenna adapter
7. SainSmart Small GSM GPRS SIM900 for Arduino UNO, Mega
Feature
Can work with Arduino Uno; Only work for 2G networkSainSmart is well known and provides high quality electronics product
Embedded TCP/UDP stack - allows you to upload data to a web server
Quad-Band 850/900/1800/1900 MHz - would work on GSM networks in all countries across the world
Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal)
Description
Overview:The GPRS Shield is based on SIM900 module from SIMCOM and compatible with Arduino and its clones. The GPRS Shield provides you a way to communicate using the GSM cell phone network. The shield allows you to achieve SMS, MMS, GPRS and Audio via UART by sending AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands). The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module(They are all 2V8 logic) present onboard.
Features:
Quad-Band 850/900/1800/1900 MHz - would work on GSM networks in all countries across the world.
GPRS multi-slot class 10/8
GPRS mobile station class B
Compliant to GSM phase 2/2+
Class 4 (2 W @ 850 / 900 MHz)
Class 1 (1 W @ 1800 / 1900MHz)
Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands.
Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal).
Embedded TCP/UDP stack - allows you to upload data to a web server.
RTC supported.
Selectable serial port.
Specification:
5 pins
Low power consumption - 1.5mA(sleep mode)
Industrial Temperature Range - -40C to +85 C
Size:8.5x5.7x2cm(approx)
Pack List:
1x SIM900 GPRS/GSM Board Quad-Band Module Kit
Download:
https://s3-ap-northeast-1.amazonaws.com/sain-amzn/20/20-012-106/EN.zip
https://s3-ap-northeast-1.amazonaws.com/sain-amzn/20/20-012-106/SIM900_A_+Module+Series+Debug+_unfinished_.pdf
8. 4G GPS GSM GPRS Module SIM7100A Development Board LTE WCDMA GNSS with Antenna for Arduino Raspberry Pi Window Geekstory
Feature
SIMCom presents an ultra compact and reliable wireless module SIM7100A which is based on Qualcomm MDM9215 multiple-mode LTE platform.SIM7100A is a complete multi-band LTE /WCDMA/GNSS module designed with very powerful processors integrating application core
This 4g module has UART serial port, Gps antenna, 4G Antenna and micro USB interface. It also works with 3G. It can be used for Arduino, Raspberry Pi, Android, Linux, and Windows
You will receive 1pcs SIM7100A development board, and 3 types antenna.
SIM7100A document link, http://www.simcomm2m.com/module/detail.aspx?id=23
Description
Description:SIMCom presents an ultra compact and reliable wireless module SIM7100A which is based on Qualcomm MDM9215 multiple-mode LTE platform. SIM7100A is a complete multi-band LTE /WCDMA/GNSS module designed with very powerful processors integrating application core:Cortex? A5(550MHz),three QDSP6 cores (Up to 500Mhz), allowing customer to benefit from small dimensions and cost-effective product solutions.
It has strong extension capability with rich interfaces including UART, USB2.0, SPI, I2C,Keypad, PCM, etc. With abundant application capability like TCP/UDP/FTP/FTPS/HTTP/HTTPS/SMTP/POP3 and MMS, the module provides much flexibility and ease of integration for customer's application.
Control Via AT Commands
Support power supplly:5-18V
Serial interface support:3.3V and 5v
Gps antenna interface
UART serial port
LED indicator
Auxiliary antenna interface
4G Antenna interface
Power supply and other interface
Micro USB interface
It can work with:
Microsoft Windows 2000/XP/Vista/Win7/Win8/win10
Windows CE/Mobile
Linux/Android
General features
-Quad-Band LTE-FDD B2/B4/B5/B17
-Dual-Band UMTS/HSDPA/HSPA+ B2/B5
-Control Via AT Commands or Gobi API
-Supply voltage range: 3.4V~ 4.2V
-Operation temperature: -40 to +85
-Dimension: 30*30*2.9mm
-LTE-FDD/Rel-9 Cat3
-HSPA+ DC-HSPA+,Rel-10 HSPA+
-GNSS gpsOne Gen 8B;standalone;assisted,XTRA
SIM Card: Standard size, 25*15mm( Length X Width)
Package Includes:
1 X SIM700A 4G Development Board
2 X SMA antenna
1 X Sucker 4G antenna
1 X Extra antenna
9. Generic SIM868 GSM GPRS GPS 3 In 1 Module With Antenna For Arduino 51 STM32 Support Voice Short Message TTS DTMF
Feature
Package quantity: 1Sim868 gsm gprs gps 3 in 1 module with antenna for arduino 51 stm32 support voice short message tts dtmf
1. Quad-band 850/900/1800/1900mhz 2. Gprs multi-slot class 12/10 3. Gprs mobile station class b 4. Compliant to gsm phase 2/2+: class 4 (2w, 850/900mhz); class 1 (1w, 1800/1900mhz) 5. Dimensions: 17.6*15.7*2.3mm 6. Control via at commands (3gpp ts 27.007,27.005 and simcom enhanced at commands) 7. Supply voltage range: 3.4-4.4v 8. Low power consumption 9. Operating temperature: -40~85 celsius specifications for gprs data: 1. Gprs class 12: max. 85.6kbps (downlink/uplink) 2. Pbcch suppor